Operation Manual

English _21
● INSTALLATION & CONNECTION
Adjusting the monitoring direction for the camera
(SND-5011/SND-7011)
J
`
The part marked shaded above acts as heat sinker pad to lose the product’s heat.
While powered, it gets hot and requires safety attention.
❖
Adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Then, turning the camera to the left or right is referred to as “Panning”, while tilting the
angle is “Tilting”. For panning, the panning limit is 176° for the clockwise, and 176° for the
counterclockwise, a total of 352° enabled; further rotation is stopped by the stopper.
- Adjust the panning angle so that the camera settles in the right horizontal position.
You can adjust the panning up to 176° in each one direction, and 176° in the other
direction, a total of 352°.
- Adjust the tilting angle so that the camera settles in the right vertical position. You can
adjust the tilting between 0° and 90°.
- The total rotation range is 352°. You can make adjustment in one direction up to
125°, and 227° in the other direction.
Panning
Tilting
Lens rotation