Operation Manual

setup screen
User
1. From the Setup menu, select the
<System ( )> tab.
2. Click <User>.
3. Provide the necessary user information.
• Administrator password change :
Change the password for the
administrator.
J

The default password is vulnerable to
security threats. You should change it.

It is recommended to change your
password once every three months.

The password length and limits are
shown as follows.
-
A combination of at least three types of upper case, lower case, numeric, and special
characters: 8 to 15 characters.
-
A combination of at least two types of upper case, lower case, numeric, and special
characters: 10 to 15 characters.
-
Should be different from the ID.
-
Cannot repeat the same letter, number of special characters more than three times.
-
Cannot use three consecutive letters (e.g. abc, 123, 321, or ascii code values in the
sequential increasing or decreasing order)
-
Special characters that are allowed. : ~`!@#$%^*()_-+=|{}[].?/
-
After changing your password, if there is a camera connected to a CMS or NVR client,
then you need to re-register it with the newly changed password. If the camera is still
connected with the same password, then the account may be locked because a client
uses the previous password.

If you try to login with the registered account, 5 or more consecutive password authentication
has failed, and then the account may be locked for thirty seconds.
100_ setup screen