User Manual

15
02
Installation & Network Connection
❖
Bell LED Status
Bell LED indicator shows operational status with blinks.
Refer to table below for detailed meaning of the LED indicator.
Bell LED Status
ON Normal Status
Blink Blinks 3-4 times with the chime when pressed
Dim
Slowly dims up & down repeatedly for 10-sec when a person
is detected.
Blink Blinks every 10 seconds to notify users of power supply issue.
RESET
Assemble
1. Once you are finished with the in-app setup for the
SmartCam D1, attached the faceplate back on.
2. Tighten the screw on the bottom of the SmartCam D1
body to secure the faceplate.
RESET