User Manual is the integration brand of network product of Samsung Techwin meaning safe and convenient town (police and polis) realized by network IP. 1/4 channels video server and network camera are easy to connect internet by supporting Ethernet interface and high resolution transmission through various suppression methods such as MPEG-4, JPEG and basic web viewer and full duplex audio, remote control and multi channel monitoring functions are available through Network Management SW.
User Manual CONTENTS Chapter 1. Product Overview ......................................................... 7 1.1. SNM-128S ...................................................................................................................... 7 1.2. System demand Items .................................................................................................... 7 1.3. Support device ................................................................................................................
User Manual 2.6.2 Screen division ...................................................................................................... 25 2.6.3 Full Screen............................................................................................................. 25 2.6.4 Moving Screen ....................................................................................................... 25 2.6.5 Caption data ........................................................................................
User Manual 3.1 Interface ........................................................................................................................ 38 3.1.1 View zone .............................................................................................................. 38 3.1.2 Tool bar .................................................................................................................. 39 3.2 Opening unit & backup file ............................................................
User Manual 4.3.1 System Setup ........................................................................................................ 50 4.3.2 Screen ................................................................................................................... 53 4.3.3 Time/Date .............................................................................................................. 54 4.3.4 Connectivity ....................................................................................
User Manual 5.1.7 Backup Time setup ............................................................................................... 111 5.1.8 Backup system tray icon ...................................................................................... 112 5.1.9 Creating Backup file............................................................................................. 113 5.2 Backup Status .........................................................................................................
User Manual Chapter 1. Product Overview 1.1. SNM-128S SNM-128S is large size management software that can manage max. 1,000units effectively, which is dispersed installed remotely. It supports real-time video monitoring, recorded video search & backup, Setup function. It also support duel monitoring and monitoring max 128 channels image simultaneously. It supports designated area search for movement, text search effectively.
User Manual 1.3. Support device Device list supported by SNM-128S. Designation DVR Model Name SVR-3200/1680(C)/ 1660(C)/1645/960(C)/945/480 Firmware 1.0.0 or higher Network Camera SNC-550/570 2.8.0 or higher Network Camera SND-560/460V 2.8.0 or higher Network Camera SNP-3300/3300A 2.8.0 or higher Network Camera SNP-1000/1000A 2.8.0 or higher Video Server SNS-100/400 2.8.0 or higher DVR SVR-1630 4.8.0 or higher DVR SVR-1650 2.8.0 or higher DVR SVR-1640 2.8.
User Manual 3) Select the item to install and press “Next” button. WESP SDK must install. 4) Select installation folder and press “Install” button. 1.5. Delete Program DB 1.5.1. In case of using Window XP Uninstall program and delete all “C:\Program Files\SAMSUNG TECHWIN\SNM-128S”folder. 1.5.2. In case of using Window Vista Uninstall program and delete all ‘SNM-128S’ folder.
User Manual 1.7. Program Login After input User ID & Password, press “OK” button. If login works correctly, then SNM-128S program is executed. Default user registered is Administrator and password is 12345. Authority of execute program has limits by user.
User Manual Chapter 2. SNM-128S Monitor 2.1 Interface Tool Bar Main View Unit Explorer Event view 2.1.1 View Area It consists of 3 View areas - Unit Explorer at left side, View for image and map at the middle, and the other View for event condition at the bottom. 2.1.1.1 Unit Explorer According to each mode, Unit & Screen Layout and map is shown to tree list. And it can register, edit and delete Unit/Screen layout.map. (Table. Tree Icon) Icon Description This is folder to register and manage unit.
User Manual When alarm input, it blinks for 5 second in red. It indicates connection failure of unit that has HDD. It indicates video channel condition by each unit and show the normal video condition. It indicates video channel condition by each unit, and it shows that relevant channel is on monitoring. It shows sensor condition, and it is blue when relevant sensor is not operating. Sensor in red indicates that it is working on. Relay out in blue indicates when it does not operating.
User Manual It changes unit, screen layout, data of map. ** It deletes unit, screen layout, map. ** It saves present monitoring condition to Screen layout. ** It renews data of unit tree (Connection condition, deleted unit list). Close all connection of minimizing, and close all map window opened. Select Map to locate at top among several maps in Map mode. Close monitoring connection, and close map window opened. Line up several maps in cascade. Line up several maps in tile type.
User Manual Address Register IP address for My Unit. Port Register the Port number of IP. Name Input name to identify unit. User ID Input administrator or user ID. Password Input the password of administrator or user ID. 2.3.2.2 Register Unit of SWR In case of using dynamic IP, it should be registered and managed in SWR. MAC or Serial No. Input Mac address or Serial number registered in SWR. In case of existing product, input MAC address and in case of new product, input Serial number.
User Manual Port Input the Port number of the registered IP. Name Input Name to identify unit. User ID Input administrator or user ID. Password Input the password of administrator or user ID. Search Group ID Please, push Search button after Group ID in SWR. If Group ID is inputted correctly, its information will be displayed on the bottom window. If not, “We don’t search the unit” will be displayed. 2.3.2.3 Register Unit in DDNS Use in case that registering the unit in DDNS.
User Manual Name Input name for the identification of my unit. User ID Input User ID or administrator. Password Input the password of User ID or administrator. 2.3.2.4 Edit unit info. When edit registered unit information, after select unit and “Edit Unit” at pop-up menu, then dialog box is indicated. Or select “Edit” in toolbar. It can edit port number and user information. 2.3.2.5 Delete unit When delete registered unit, after select unit and select “Delete Unit” at pop-up menu.
User Manual channel and “Quick Save View Set” in tool bar and register. It is saved with present Division, Channel, frame rate, resolution together. 2.4.1.1 Registry through menu At pop-up menu, it indicates registry dialog box after select “Add View Set.” Or select “Add” menu in tool bar. 2.4.1.2 Edit View Set info. After select View set, dialog box is indicated if “Edit View Set” is selected from pop-up menu. Or select 2.4.1.3 “Edit” menu in tool bar.
User Manual 2.5 Map mode It can register channel, audio out, relay out, sensor etc on the map and manage them. Select Map tab from unit explorer. 2.5.1 Map Editor Execute Tools>Map Editor at Map mode. Unit Tree Map Tree Properties Toolbox (Table. Map Editor Tool Bar) Button Function Add Map. Save Map info.
User Manual 2.5.1.1 Unit Tree It indicates resistible unit & device on map and the unit is resistible through Monitor program. 2.5.1.2 Toolbox When insert Sub-map/Map Link to a map, add this icon through Drag & Drop. 2.5.1.3 Map Tree It indicates in tree type to view Map structure and device belong to map at a glance. When select the item from this tree, it indicates editable content to Properties window according to type of item. 2.5.1.4 Properties Content of item selected is editable from MapTree.
User Manual Map Map Name Sub-map Image File Name, Position(Width, Height), Size(Width, Height), Target Map 2.5.1.5 Map Link Link Name, Target Map Channel None Sensor None Relay None Mic None Register User Icon It can register device icon on the map such like channel, audio, relay, sensor etc in image icon of user wanted. Resistible file format is JPEG, GIF, and BMP. It can execute through ‘Tool-> Register User Icon’ in Map Editor. 2.5.1.6 Select Map adding button from menu.
User Manual 2.5.1.7 Edit Map Double click map for editing from right Map Tree to open Map. After click map for editing from Map Tree in case of editing Map name only, it can edit Map Name from Properties. 2.5.1.8 Delete Map After selecting map to delete from Map Tree, it selects Delete from pop-up menu. 2.5.1.9 Add Sub-map 1. After opening map to add sub-map, drag Sub-map icon from Toolbox and drop it to the wanted location. 2. It asks as above which map connects to Sub-map.
User Manual 2.5.1.10 Add Map Link 1. Open to map to add to Map Link, and drag Map Link icon from Toolbox and drop it to the wanted location. 2. It asks which map connects to Map Link as above. If it selects map wanted to connect, it connect to Map Link. 3. Then it edits Target Map of Properties after selecting Map Link icon from map or Map Tree for editing Map Link. 2.5.1.11 Layout Map In case of sub-map added, superior map output icon of sub-map and it should click to view real map on new window.
User Manual 2.5.2 View Map Select Map item in Map Tree to open Map window. 2.5.3 2.5.3.1 Control the device that belongs to a Map Image viewing Select channel with expansion of map registered or select channel icon of Map window. Live image monitor is popped up. 2.5.3.2 Sensor In case of sensor that is registered in the map, sensor on the map blinks in red. 2.5.3.3 Relay out When relay out that is registered on the map is on, relay icon on the map blinks in red.
User Manual 2.5.4 Line-up Map window In case of opening several map window, it can line up window to In case of set specific map window to the top, select 2.5.5 Cascade or Tile type. . Keep Visible / History Button in Toolbar is operated by toggling. When it is on, it is on to the map opened or display to new window when it opens the other map. When it is off, it replaces present map and the other map shows on the existing map.
User Manual 2.6.2 Screen division It supports 1/4/9/13/16/25/36/49/64 screen division. 2.6.3 Full Screen When “Full Screen” menu is selected, main window is converted to full screen mode, and it returns to original mode through press Esc key. 2.6.4 Moving Screen When it likes to convert present monitor screen to other monitor, click left mouse button on the image which like to change location and drag & drop to the monitor which like to view. 2.6.
User Manual 2.6.8 Stream In case of streaming the model that supports MPEG4 streaming, it shows the menu to select stream as follows. If it sets to Auto, it asks the change of resolution to set the size of monitor window and performance of PC. The unit serves stream that is closest to the resolution requested. But, if it selects specific Stream, it asks as Stream selected irrelevant to the window size and performance.
User Manual format and recording drive when auto recording. (If it is selected to manual, it selects file format and file name when it select “Save As.”) 2.6.11 PTZ Control 2.6.11.1 Pan, Tilt Control Select “PTZ” menu or button from pop-up menu. Pan, Tilt is operated when click mouse in case that + line is on the center of screen. It controls Pan through click left/right direction from the center and Tilt through click top/down direction.
User Manual Mute, and control audio volume. It can mix several audio channels. 2.6.13 Buffering When playbacking at full frame rate if video is not transferred smoothly from unit, buffering will start and make it smooth. 2.6.14 Close All If it selects button, it closes all monitor connected at present. If it is map mode, it closes all map windows. 2.6.15 Event Log It list up event in real-time coming from the units registered the lower control center. 2.6.
User Manual If there is channel playing, monitor focus moves to relevant unit. In case of Map mode, monitor window pops up. 2.6.18 Instant Viewer After selecting the one from list that MD occurs in Event Log, it executes single exclusive viewer for live view through Instant Viewer ( ) button. If selected item is not 1channel event, the button is unactivated and Instant viewer is not executed. 2.6.
User Manual Æ 2.7 Status & Action 2.7.1 Status & Acton info. It shows present MD/No Video, Sensor status of unit registered to My Units. It executes Action like Relay out and Audio out. Select Icon. In case of Audio out, it can transmit audio to several units simultaneously. It shows present time of each unit. (Table.
User Manual 2.7.2 Image Viewing If it double clicks the list, it monitors all channels of the unit. Screen is divided as many channels belong. In case of Map mode, monitor window is popped up. 2.7.3 Setup Alarm notification by unit Through Alarm Notify column at the right, it can set alarm notification method by each unit.
User Manual All log or only certain log area can be deleted in Advanced menu of Event Log Utility. 2.9 Management of program user It can manage program user. When it install at first, there is Administrator. And Administrator is not allowed to delete and have all rights. Select Users and Passwords menu from Admin menu. Set up user information by pressing “Add” button. It can set up the authority of using SNM-128S, Playback, and Configuration.
User Manual After the input current password and new password, press OK button to apply new password. 2.11 Setup Option It executes optional setup related to several functions. Select Tools>Options menu. 2.11.1 Caption Select caption shown to monitor view. It can set whether it shows unit name, channel number, time, event, video playback speed, time zone, number of login user or not. It can manage Font color and size of caption shown to monitor view. 2.11.
User Manual 2.11.2.1 View mode Full mode plays the image in full screen. Ratio mode shows the image meets in CIF resolution ratio. Caption Area mode plays caption area on top separately, and it play images meet to the ratio. If Use DirectX mode is checked, it plays image in Direct Draw. According to graphic card, it can expect better quality image. 2.11.2.2 Deinterlace Deinterlace is applied to the image shown to monitor. It uses when Video set to D1. 2.11.2.
User Manual Function of monitoring might be limited by system function (CPU, graphic card, memory) 2.11.2.6 Low bandwidth mode This mode is to higher monitoring performance under low bandwidth network environment.. 2.11.3 Recording Select drive to record real time image files through Quick Record. It creates folder named CCQuickRecording in assigned drive. And it makes re4 file with unit name_channel name and date. In recording Save As, select drive to record.
User Manual 2.11.4.1 Buzzer If buzzer is on, it alarms when event occurs to event log. It can play alarm as many times as assigned to duration. 2.11.4.2 Live Monitor Blink When the event occurs to monitoring image, it can select whether it colors on the border of the image in red. 2.11.4.3 Event Log It can select whether it can indicate the event to Event log. Even if it set to Off here, it still indicate important event (Relate to errors like authentication fail, HDD error etc.). 2.11.4.
User Manual 2.11.5 Map If it selects Display Unit Name, it display unit name to display of device name registered on the map together. 2.12 Export/Import configuration Information Configuration information is available to save in a file to export or import When the user clicks export menu, the export window pops up. .Select import and select the saved file, SNM-128S program restart and modified configuration is applied. Site information, display layout, map, user configuration, option can be saved .
User Manual Chapter 3. SNM-128S Playback It can search and view image, audio, text recorded in the unit. Select Tools>Playback menu. 3.1 Interface Log view View zone HDD status view Channel Play control view Calendar view 3.1.1 View zone 3.1.1.1 Play Control View There is controller for the control Playback. Also, it sees the log of the area assigned and display in stick bar visually. 3.1.1.1.
User Manual 3.1.1.2 Log View It shows the log of assigned area. It can watch by category. If double click Log view area, it pops up log view. If pop-up view is closed, it returns to original location. 3.1.1.3 HDD Status View It shows recorded size and free size in HDD of unit. Also it shows the recorded time zone. 3.1.1.4 Channel View Select channel to playback. Default set is all channels. 3.1.1.5 Calendar View It can change search area by specific date time. 3.1.2 Tool bar (Table.
User Manual 3.2 Opening unit & backup file Select File>Open menu ( ). Through SNM-128S, registered unit tree to My Units is shown. Among the units, searchable unit that is HDD installed is showed. In case of unit search, select wanted unit and press “OK” button. When it search recorded backup file, press “Open Backup File” button and select the file wants to search. If it opens the first unit, it is searched in the time of last day recorded in unit.
User Manual 3.3.3 Changing Channel Searchable channel by unit is enabled. Select channel by pressing button. 3.3.4 Searching Calendar In case of Pause, it can move searching area to specific date regarding recording date. Press date on the calendar or press 3.3.5 button after input wanted time. Expression of Log data & Search Log list in present search area is shown to log view. Log list shows log related to relevant channel searched only, and it can see divided by category.
User Manual Keyword among the total text searched if search is the end If “Save” is selected, it can record searched text in txt file format. If double click searched text, search time is jumped to relevant area. During text searching, other search is not executed. (Motion Area Search, Time Jump, Playback etc) 3.3.7 Smart Search During specific time area, it can search Motion Detect started image in assigned area. Only the SVR-3200/1680(C)/1660(C)/1645/960(C)/945/480 models support this option.
User Manual During searching, other searching is not executed. (Text Search, Time jump, Playback etc.) 3.3.8 Thumbnail Search Based on specific time, it can search thumbnail of the date, time, and minute/second base. Only the SVR-3200/1680(C)/1660(C)/1645/960(C)/945/480 models support this option. Select channel to search, standard time and press “Search” button. Recored images in a second are indicated on the basis of standard time at bottom area.
User Manual If select “Previous” button, it searches previous time image recorded than present thumbnail shown. Select “Next” button to search next image recorded of present thumbnail. 3.4 Playback 3.4.1 Playback Control button (Table.
User Manual 3.4.3 Press Text button to indicate text dialog box. It shows text received from server while playback. Only the SVR-3200/1680(C)/1660(C)/1645/960(C)/945/480 models support this option. Double click text and move to relevant time zone. And press “Save” button to save to present text file format. 3.5 Image control 3.5.1 Zoom/Brightness/Shades control If it selects Image>Screen Adjustment menu, the dialog box for screen adjustment pop up.
User Manual 3.5.3 Image printing If it selects Image>Print menu, it can print the image on the monitor selected with the memo. 1. Standard of Printing is A4 base. 2. Maximum7 lines input of menu is available, and less than 45characters input in a line do not deviate the paper. 3.6 Backup function If it selects backup ( ) button of Hdd Status View, Backup Utility is executed. It can select .rec & avi. In case of selecting .rec, it is shown left above and it is shown right above picture in case of .
User Manual Press Backup ( ) button to execute Backup Log. Backup Log function is the function to backup log data expects the image to Excel file format. Input Backup zone (Date & Time), channel, file name etc. and press “Start” button. 3.8 Option Setup 3.8.1 Caption It selects whether it shows unit name, channel name, time, caption data. Auto control of Screen division 3.8.2 Screen Select YUV/RGB and yes or no of applying deinterlace.
User Manual 4 SNM-128S Configuration Tools According to feature of production, channel number and menu can be different. This guideline applies only to the SVR-3200/1680(C)/1660(C)/1645/960(C)/945/480/1630 models. To change settings in the SNM-128S setup program, you must select the DVR main menu item "Network > Remote Control > Remote Control Setup > Use". 4.1 Login Configuration Tool (1) Click icon from desktop to execute “SNM-128S Configuration Tool” program. (2) Login to program.
User Manual 4.2 Interface Site Tree Menu Configuration Page Full screen of Configuration Tool is as same as above. It consisted of Site Tree, Menu, Configuration Page areas. 4.2.1 Site Tree Unit list on Site Tree is the units registered to My Units from Main View of SNM-128S. And it does not support direct registry/delete/amend from Configuration Tool. List is synchronized with My Units of SNM-128S regularly, and it is refreshed through pressing Refresh button below.
User Manual 4.3 Setup DVR 4.3.1 System Setup 4.3.1.1 System Info It shows system information of DVR. Alias, Description in blue color can be changed when relevant item is double clicked. After editing, press “Apply” button. 4.3.1.2 Save & Load It can save whole setup data in DVR selected presently (Save), and it can change other DVR setup identically using the data file saved (Load). It is useful when set up several DVR identically. It is compatible when firmware and product group is same.
User Manual Click “Save” button for the window to record relevant DVR setup data into file. User can save setup data into the name wants. Click “Load” button to load Import Wizard window. If it selects *.cci format file that is recorded into Save from File list, Product Type, Hardware Type, Firmware Version of the file selected in Load Source Info is indicated. After check data, click “Next.
User Manual After input Admin Password, click “OK” to save. After complete Save, “Completed” message is appeared and “Finish” button is activated. Reboot Use this when rebooting DVR. Factory Default Use this when setup value changes to factory setup. Change IP Address Use this when to change IP of DVR. When Factory Default is executed, System data & time, network setup, video type (NTSC/PAL) setup is not changed.
User Manual 4.3.2 Screen 4.3.2.1 Video channel setup Set up basic information, video Calibration by video channel. Tab number (CH1, CH2, CH3, CH4…CH16) indicates each video channel number. 4.3.2.2 Channel info. - Activity : Set up the use of channel or not. - Channel Name : Set channel name. - Camera Type : It shows input video type and works automatically.(NTSC/PAL) - Black&White : Select video input in case of black & white. 4.3.2.
User Manual 4.3.3 Time/Date 4.3.3.1 Date & Time Date & Time It shows date & time of DVR. Setup is available through the menu of local unit. Time zone & Daylight Saving Time It indicates local time zone that DVR set. If it selects the time zone that Summer time is applied, controller to select Daylight Saving Time (DST) appears. When DST set to On, it operates as same method as Microsoft window. 4.3.3.
User Manual 4.3.4 4.3.4.1 Connectivity In case of Ethernet In case of using dynamic IP address, select “Use DHCP.” In case of Fixed IP, set up allocated IP address, Subnet mask, Gateway address, DNS server etc. Contact to relevant ISP or network administrator for fixed IP address setup. 4.3.4.2 In case of xDSL If network line is xDSL (ADSL, HDSL, VDSL etc), select xDSL and setup user ID & Password.
User Manual 1. There are ADSL, HDSL, and VDSL etc in xDSL. It is usable in case of PPPoE protocol. 2. When network is set to xDSL type, it selects WRS. (Except the case of Fixed IP use.) 3. It changes to network type to xDSL type, and it is not connectable in Ethernet condition. 4. User ID & password is the account offered from xDSL ISP Company. 5. Even if xDSL, it set to Ethernet in case of use automatic connection modem. 4.3.4.
User Manual - In case of use xDSL (Except the use of fixed IP address.) 4.3.4.4 Port setup - Port : Change Port number when DVR is not connected because of Fire Wall. - Idle Time : This is to distinguish abnormal client of network status. In case of unrecovered of network within waiting time set, it closes connection with relevant client. Basic set time is 3 minutes.
User Manual At COM Port page, it sets communication setup for each COM Port which device is useful to connect. As many as number of COM Port, Tab exists and number of Tab means the number of COM Port. To control the PTZ operation via coax protocol, you do not need to set up this option. 4.3.5.1 Selecting device connect to Serial port PTZ, TP, Keyboard, Text are the devices that can connect through serial port. - PTZ : Select it when PTZ is connected.
User Manual - PTZ Port : Select serial port that PTZ device is connected. - Address : Set up Address of PTZ device. Address input setup value of PTZ device. - PTZ Home Idle Time : It moves to assigned Presets if there is no movement during PTZ Idle Time when control PTZ. Set up first at “Channel,” “Device” tab when PTZ is connected. 4.3.6.2 Preset setup Preset setup window appears when press “Preset” button.
User Manual 4.3.6.3 Auxiliary setup In addition to the basic function such like Pan/Tilt/Zoom, PTZ device offers various auxiliary functions (Ex. Control Wiper and Light etc). It sets to use auxiliary function. If it press ‘Auxiliary’ function, window for the control 16 auxiliary function. Press Selected “Auxiliary” for the use of Auxiliary function after selecting “PTZ” from pop-up menu of image. 4.3.
User Manual AD Dome does not support menu control, Presets or AUX when setup with coax protocol. Idle Time Activate or disable PTZ Home, and set up a standby duration for the device before moving to PTZ home. 4.3.8 4.3.8.1 User User Accounts DVR User Accounts consist of administrator and User. In case of administrator, he has all rights. User account can expand up to 10 and each user has limited right reserved. Administrator Password Default administrator password is “1111111” and can be changed.
User Manual 4.3.8.2 User Authority For general user, Mike, PTZ, Relay, Search, Quick recording, Backup, Audio, Menu, Power On/Off, monitoring right per channel can be configured. User1 to user10 who is registered in basic have only whole channel monitoring, quick recording, backup, audio authority. 4.3.
User Manual 4.3.10 Disk It indicates the data total HDD size and free HDD size that is installed in DVR. 4.3.11 System Log This is used to see System log.
User Manual 4.3.12 MD It sets Motion Detection function by camera channel. MD Sensitivity sets sensitivity of movement. If it set to None, it means no use of movement sensitivity of relevant channel and it goes to Highest according to sensitivity. (None / Lowest / Low / Standard / High / Highest) 4.3.13 Sensor Input It sets Sensor type. Max. 16 sensors can be set.
User Manual 4.3.14 Text Set Recording menu On and set up the channel linked to wanted value. If connecting device Star Finger 007, set relevant device only. And when it is other product, set to Manual and set all sub-menus. 4.3.15 Event Action DVR supports 4 relays, 1 buzzer, 1 email, and it can work with the event of sensor input, movement detection etc. - Selecting Moving subject : Select subject of movement by source selected. - Selecting Source : Select event source to activate relevant relay.
User Manual 1. Time zone can be set from “Time Schedule” page 2. 4 time zones can be set as Special Time at “Time Schedule” page. 3. User can control Relay in DVR temporary and it is prior to the movement by Relay setup 4.3.16 System Event It sets ON/OFF System Event when the problem is caused into system. - HDD Fail : Event activates when HDD connection is failed or wrong. - HDD Almost Full : Event activates when recording size of HDD is full.
User Manual 4.3.17 E-mail - Recipient : Input E-mail address to notify event. - Sender : Input the content of “Sender” that is noted on E-mail content in type of xxx@xxxx.xxx. - Sending Interval : E-mail notification is sent in time interval of Mail Duration setup, not whenever Event occurs. It can set from 1 to 30 minutes. 4.3.18 Event Preset User can configure MD, Sensor, Text event. User can configure preset per each channel.
User Manual 4.3.19 Digital Input/Output Digital Input/Output is port which is able to use Input and Output simultaneously in Digital. There are 12 Digital input/output Digital In/Out Channel & Input/Output 12 channels can be configured by both input/output. When configuring it as Input, once one channel input comes, emergency recording begins. In case of being configured as Output, any sensor input triggers run. 4.3.20 Event check This is for the time configuration of Event recording.
User Manual 4.3.21 Record 4.3.21.1 Schedule & event Schedule and event configuration is to record by configured schedule and event. It can be configured by each day, each time. Before configuring schedule, set program in advance. Program can configure from A to Z. Event recording works by Sensor and motion detection and Text(POS) and Digital input. 4.3.21.2 Manual & event Manual and Event configuration is recording condition by event and manual pushing [REC] button of the front panel.
User Manual - Pre event (sec) : It can set till max. 5 seconds. - Post event (sec) : It can set till max. 60 seconds. 4.3.22 Program Program can configure resolution and frame rate and quality per each channel from A to Z. - Resolution : CIF, HALF, D1 - Frame Rate : NTSC(0 to30), PAL(0 to 25). - Quality : Q1 to Q5 4.3.23 Audio Based on DVR, it supports 1 to 16 audios. When play back image, it can work with every channels.
User Manual - Channel : Set which channel works with. Dependency - Gain : Control the value of Audio Gain. - Record : Set whether audio recording or not. 4.3.24 Etc. This menu can configure automatic deletion and alarm level and playback interception. - Auto deletion : If there are no space in HDD for recording, previously recorded data will be deleted automatically. - Alarm level : Checking Disk capacity and show message. - Playback : Menu for excluding playback. interception 4.3.
User Manual Above picture is beginning screen of the configuration of existing DVR. 4.3.25.1 Screen In Display configuration, channel name per channel, video brightness, contrast, clearness can be configured. Title is available both Korean and English.
User Manual 4.3.25.2 Display Select information to display on console monitor. According to the selection, its information can be shown on console monitor or not. Configure lists are Date&Time, HDD free space, recording condition, title, remote ID etc. 4.3.25.3 Covert Configure Video dispaly yes or no on console monitor. Select Ch 2 and select "Turn off" in Live Video Hide and then, CH2 vidoe will not be shown on Console Live Monitor. If select "Turn on", Video will be shown nomrally.
User Manual 4.3.25.4 Spot Possible configurations in Spot configuration are Spot mode and event pop-up of spot screen. Manual operation of Spot mode to select channel with executing Spot mode in console function. Sequence conversion proceeds as many as channels of the DVR. There are "Turn on" and "Turn off" configuration on Spot event screen. If configured as "Turn on,” when event on, event pop-up in Spot monitor execute. If "Turn off,” it won't work. 4.3.25.
User Manual when text on. User can not configure yes or no of using Sensor but sensor type in between NO type and NC type. 4.3.25.6 MD In this menu, use can configure yes or no of MD function use and the area display. In MD configuration, select yes or no of using MD function per channel. "Turn on" means to use MD function. Area display is to see the motion location when using MD function and runs when "Turn on" is configured. 4.3.25.7 Relay This menu configures relay function.
User Manual 4.3.25.8 Text This configures text but it should be done at console directly 4.3.25.9 Link This menu configures the network. . The user can select among Ethernet/xDSL type and can choose whether to use DHCP or not. The user should contact the network administrator when the IP address, subnet mask, gateway, DNS are configured. SWR function can be turned on and off. DDNS function should be on to use this function. Go to www.samsungipolis.
User Manual 4.3.25.10 E-Mail This menu configures mail sending. DNS should be input to use mailing function. Enable email function to use email. Type the receiver’s email address at receiver’s account and type the server address of collecting mail address at SMTP server. The authorization part authorize for sending mail. Any numeric or alphabet letter can be set for ID/PW 4.3.25.11 System The language, key button melody, DVR name, remote control ID can be configured at system menu.
User Manual 4.3.25.12 PTZ PTZ menu configure the camera ID and PTZ model. Type the same id of connected camera and choose the camera model connected 4.3.26 Configuration of SVR-940/450 This is DVR configuration of SVR-940/450. Below images can be different from channel or menu by the product.
User Manual 4.3.26.1 Screen Configuration User can configure channel name and screen brightness etc. Channel Name User can configure channel name temporarily by channel. Covert User can select to show the channel or not in live screen. Brightness Adjust screen brightness by its value control. Contrast Adjust brightness contrast of screen by its value control. 4.3.26.1.
User Manual channel3 ► channel4) automatically. User can configure time interval which is transferred in [Auto Screen Transfer] from 1 second to 10 second. Screen Sequence If configuring the condition on, screen will be changed automatically and If condition off, screen transfer doesn’t work. Screen Sequence Interval Configure time interval transferred automatically. Configuration from 1 to 10 second will be possible.
User Manual If setting it “ON”, when recording, recording status will be shown at the corner of each channel Channel Name If setting it “ON”, channel title which user configured in sub menu of channel name from 1 to 9 (SVR-450: ch1 to 4) will be displayed on live screen. Event If setting it “ON”, when user creates event, it will be displayed. Configuration of menu brightness Adjust brightness of menu font. The higher %, the more brighten. 4.3.26.1.3 SPOT * SPOT menu is only for SVR-940.
User Manual 4.3.26.2 Recording Configuration Resolution User can configure the resolution for recording. User can configure the resolution for recording. (SVR-450 supports two types of resolution 360x240 / 720x480 and SVR-940 supports 3 types of resolution-320x240/720x240/720x480 ) In case of recording high resolution by 720x480, its recording quality will be better but recording space will be bigger with slow recording movement.
User Manual 4.3.26.2.1 Detailed recording configuration. Configure detailed recording configuration of each channel. Channel Select the channel to do recording configuration. Recording mode. Configure recording mode by each channel. - Normal recording : Continuously records for 24 hours - Motion recording : When movements are on the video, records the video. - Sensor : Recording when there is sensor input - TEXT : Recording when text event is generated.
User Manual Recording quality User can select recording quality among high and middle and low Recording Frame Configure Recording Frame Available frame number of 720x480 is 30 frames and in case of 360x240 is 120 frames. Recording pre Event Configure recording pre Event. “ON” mode, pre recording of event is 5 second and in “OFF” mode, it doesn’t work. Recording post Event Configure recording time after event. Configure it between 1 and 20 second.
User Manual When in Event “ON”, the screen of the event will be displayed in full screen. Event support time Select how long screen will be displayed when transferring event screen If user configure it by 3~5 second, when other channel has another event, screen transfer won’t till the time and after that, its event channel will be shown. Sensor Select the channel to configure sensor. - Sensor type : Select the channel to configure sensor..
User Manual - Partial : If there are motion signal in certain area, it records. Configuration of Motion sensitiveness Configure motion sensitiveness. User can configure from 1 to 9 and close to 9, its sensitiveness will be increased. 4.3.26.3.2 Text This is configuration to see input Data from POS machine through DVR video. To match the protocol with input device, point HEADER1/2 and DELIMITER and configure output line. Output channel. Select the channel which text will be displayed on POS using.
User Manual 4.3.26.3.3 Relay Relay output according to selected option. - SENSOR : When the sensor of selected channel is activated, Relay is output. - MD : When there is motion detection, relay is output. - TEXT : Relay output when the POS is used. - V-LOSS : Relay output when there is an image processing. - HDD Error : Relay output when there is an error with HDD. 4.3.26.
User Manual company for the user - GATEWAY : Type the gateway address provided by the the internet service company for the user - DNS : Type the DNS address provided by the the internet service company for the user - ID : Type the user id provided by the the internet service company for the user - PW : Type the user password provided by the the internet service company for the user - SWR Yes/No : .
User Manual When it is OFF, the entire frames will be transmitted. 4.3.26.4.2 E-mail It sets the email address to receive the capture image when there is an event. Email receipt It sets the mail receipt records. When it is ON, the mail is sent while the mail is not sent when it is OFF. Email address . It sets the mail address. Mail server address It sets the server IP to send the mail. Do not change the basic value to use.
User Manual 4.3.26.5 Serial (RS-232) It sets the connection with POS device. - SYSTEM ID : It sets the system ID. - BAUD RATE : It sets the data transmission speed per sec.. - DATA BIT : It sets the data transmission byte. - PARITY BIT : It sets the error checking method when there is an error of data transmission. - STOP BIT : It sets the insert byte when data transmission is completed. 4.3.26.5.1 Serial (RS-485/422) It sets the connection with CCTV device and cameras.
User Manual transmission - STOP BIT 4.3.26.6 : It sets the insert byte when data transmission is completed. System It sets the whole system of DVR Language This menu selects language of DVR. Default languages are 10 including Korean and English.. Key buzzer This menu sets the buzzer activity when the front button of DVR is pressed. Initial setting This menu return the unit as factory reset. Remote configuration This menu decides if remote factory reset is available.
User Manual 4.3.26.6.1 HDD This menu is available on the DVR itself. HDD format This menu decides if the recorded data at HDD to be deleted and this configuration is available on the DVR utself only. HDD information indication It shows the information such as HDD size and recording time. 4.3.26.6.2 Password This menu sets the password and limit use according to password input.
User Manual 4.3.26.6.3 Time configuration This menu sets the DVR time, date. When time is configured, the device reboot automatically to save the existing data. 4.3.26.6.4 PTZ This menu configures each ID of PTX camera connected by channel and it configures camera model. Channel It selects the relevant channel to configure. Camera ID The user can configure from 0 to 255 according to each ID for each camera. Camera model It selects the camera model connected.
User Manual 4.3.27 Web Server & IP Camera This guideline is to setup the web server and IP camera of the SNS-400/100, SNP3300/3300A/1000/1000A, SNC-550/570, SND-560/460V models. 4.3.27.1 Video Configuration for Video image of IP product. Mode Select video compression method between MPEG and JPEG. Resolution Select the resolution. It is for Web viewer or SNM-128S Type Select Video Source type. Select correct video type according to nation and territory. In case of Korea, select NTSC.
User Manual Frame Rate The higher Frame Rate, the more smooth motion image user can see. It depends on Frame Rate. 4.3.27.2 Video/Audio Configure Video and Audio use. Video Configure video channel use. If ticked off, it is on using. If not, its video channel is not used. Audio In Configure Audio channel use. If ticked off, it is on using, if not, its audio channel is not used. Audio Out As to input audio, it configures weather letting input audio be used as audio output.
User Manual 4.3.27.3 Network Input network configuration. There are easy network configuration and SWR, and DDNS configuration. Basic Configuration To see video image via SNM-128S or Webviewer, network configuration should be done. Its values should be input with the data from network administrator. Basically IP address, subnet Mask, Gateway is necessary for using network. SWR To use SWR, it should be on together with DNS value. Please, contact network administrator for DNS value.
User Manual 4.3.28.1 Status Displays the current status of each channel along with the free storage space of the product. The Status Page lets you check the status of all channels in one screen. Dark gray indicates an unused channel. Light gray indicates a channel that is connected to a camera, but is not in recording mode. Blue indicates a channel that is in recording mode. Orange indicates a channel that is experiencing a connection problem with its camera.
User Manual Current Recordable Time displays remaining recordable hours based on the current free storage space of the product. If the HDD becomes full during the Repeat Recording mode, the Current Recordable Time menu displays Repeat Recording. 4.3.28.2 Recording Setup Select a channel on the left side of the screen to choose its video recording method. Select a channel on the left side of the screen to choose its video recording method.
User Manual record any video. 4.3.28.3 Event Setup From this screen, you can configure Event-related settings. Local Sensor Type Local Sensor Type lets you select the operation type for Sensor 1 and 2 between Normal Open and Normal Close. Normal Open activates a sensor input when the contact type is short or the active type is at the Low level. Normal Close activates a sensor input when the contact type is open or the active type is high impedance (open collector).
User Manual Enter a new group name in the Input Group or Output Group pane. The list below the panes displays the channel camera names along with the product. To display available Input Event or Output Event sources, double click on a camera or the product. Available options for Input Group include Sensor and MD (Motion Detector) and for Output Group, Relay, E-mail, and Beep are available.
User Manual First, enter a name for the group that you are about to create in Group Name. Then select Event Input and Output Groups in the Input Group and Output Group list. Events registered for the selected Input and Output Groups are at the bottom of the screen. Click to create the group. closes the Group Settings window without creating the group. To delete a group, select a group in the Group list, and then click . 4.3.28.
User Manual Channel name: Name a channel. Channel Name is displayed on the top of the Monitoring and Playback screens. Model: Select the model number for a camera. In addition to network cameras, you can choose network video servers such as the SNS-100, SNS-400, etc. Connection Type: Select the connection type for a camera between Static IP and DDNS. - To use Static IP, enter the IP address and connection port for a camera. - To use DDNS, enter the DDNS server address and user ID.
User Manual You can use either PPPoE, Static IP, or DHCP as a connection method for the network ports on the rear panel. If you are not sure which method to use, please ask your network administrator for assistance. If the product is connected to a PPPoE-type xDSL line, choose PPPoE as the connection method, and enter the access ID and password. Choose the Static IP connection method if you wish to use a static IP, and enter the IP address, subnet mask, and gateway to use.
User Manual choose between 24-hour and 12-hour time formats for displaying the current time in Time Format. Click Time Zone to select your time zone and city. If your city observes Daylight Saving Time, it will be applied automatically. You can also manually decide whether to use DST or not with DST Use. You can choose to use an NTP client and NTP server in the NTP menu.
User Manual button, and in the future. To save the current settings of the product as a file, click the then set the filename and path. To reboot and restore old settings from a file, click the button, and then select a settings file. 4.3.28.9 System Log You can view the System Log on this page. The following chart displays the various log types.
User Manual Event Group Created An Event Group was created. Event Group Deleted An Event Group was deleted. Key Lock On Key Lock was locked. Key Lock Off Key Lock was unlocked. HDD Test HDD disk-checking was performed. Log File Export A log was exported. Firmware Updated Firmware was updated.
User Manual To change the Admin password, enter the current password in "Old Password" and a new one in "New Password," confirm the new password in "Re-type New Password," and then click the button. The Admin password is used for logging in to the Admin account, which is the system administrator account with the highest permissions level In addition to the Admin account, you can set up one user account with limited permissions. The User account is granted permissions by the Admin under the Authority menu.
User Manual Chapter 5. Schedule Backup This is Software offered to backup recorded image data in DVR that HDD installed to HDD in PC. This can be used through Administrator account only and uses unit register data of the account. Only the SVR-3200/1680(C)/1660(C)/1645/960(C)/945/480/1630 models support this option. Backup means to move recorded image data in HDD of unit to HDD in PC.
User Manual And backup file is stored in appointed folder by unit and folder name is created according to format of \Backup\Unit name\. At this time, left on the tree shown is name of unit and unit name can be changed using SNM-128S Configuration. User can not assign backup file name temporary and save to specific folder. 5.1.2 Password setup This has security function that only user who know password to open and see backup file by designating password to backup file created.
User Manual Files that passed preservation period are deleted and there are 3 cases of the time to check preservation period. First is the time [Apply] pressed after time setup backup works, Second is the time that backup program is worked and 24hours interval after that, and third is the time when message for lack of backup space in HDD is indicated. When there is file passed preservation period of backup, message box whether delete a file is indicated. It deletes the backup file with pressing Ok.
User Manual 5.1.6 Backup data space setup Among image data recorded in hard disk, it designates the data range wanted to backup. Time range is base on recorded time. So even if it records image for 24 hours continuously, it can backup image data as much as the time range wanted. Click the mouse and select the wanted time range in 1 hour base. To release the selection, click mouse again. Using Ch1 … Ch16 (32) check box, it can select wanted channel to backup. All channels are select as default.
User Manual Backup time of all cameras is indicated to backup time table together, and only setting camera schedule is classified in other color. And empty time in schedule only can be used to new schedule. Indicated white parts are empty time to use. If it locates mouse to the block set backup time, camera name set is appeared to ToolTip. Backup time range is able to set in an hour and use mouse to select block assigned in white. To release selected part, click mouse again. Backup repeats weekly.
User Manual When it close backup work program, it input administrator’s password. 5.1.9 Creating Backup file Backup file is created to every file by unit and a time. And during backup time set, it tries to connect to unit continuously. When connection success again, it process backup continuously and create backup file into other name. Backup work starts every hour 00minute according to backup work time set, and backup work is closed at every hour 59 minutes.
User Manual Because the result of past backup work is also stored, backup file at relevant date can be called through pressing [Load…] button and it can review backup data at any time again. 5.2.1 Backup Status table On backup work status table, detailed processing data related to backup that is scheduled is indicated. Data relate to ‘Schedule’, ‘Unit Name’, ‘Backup’, ‘Drive’, ‘File Name’, ‘Progress(%)’, ‘Size(MB)’, ‘Start Time’, ‘End Time’, ‘Result’ is indicated etc is indicated.
User Manual Through ‘Detailed Backup History’, how many backup files are created and what MB size is created can be aware. 5.2.3 Stop backup work To stop schedule that back up, select schedule working and press [Stop] button When work stops, the file at the time Stop is created and all recording content is saved as it is. [Stop] button is activated when backup in ‘Processing’ status is selected.
User Manual 116
