Operation Manual

English _27
● INSTALLATION & CONNECTION
Installation
1. Attach the installation template to the
selected area and punch 3 holes as shown in
the figure.
2. Use the 2 supplied screws to fix the camera
to the 2 punched holes.
`
Set the <FRONT TOP> mark imprinted on the
camera to face the direction of camera monitoring.
3. Connect the camera internal terminal with the
corresponding cable.
4.
Adjust the lens in a desired direction by
referring to the “Adjusting the monitoring
direction for the camera” section. (page 37)
5. Fasten the dome case (dome cover +
camera case) to the main body as shown in
the figure.
J
`
Pay attention to the direction for assembly.
FRONT
TOP
DC 12V
1 2 3
1. ALARM OUT
2. ALARM IN
3. GND
VIDE O
RESE T
T
F
W
N
AF
+
-