User manual

setup screen

60_ setup screen

Video setup

From the Setup menu, select the

<Audio & Video

( )

> tab.

Click <Video setup>.

You can conﬁ gure the settings to your

preference: OSD, General, White

Balance, Exposure, Special and Area.

To set the OSD

Device Name : Display the <Device

Name> on the Live screen, which you

have provided in <Product information>

from <System>.

Date & Time : Display the date and time

information on the Live screen.

PTZ : Display the PTZ information on

the Live screen. If you set it to <Auto>,

the PTZ information will be displayed

only if a PTZ motion is detected, which

will disappear if the motion is stopped.

Action : Display on the Live screen the

information related to operations such

as preset, swing, group or trace.

To set the General

Focus Mode

ONEAF : Auto-focuses the camera once after the Pan, Tilt, or Zoom function is

used.

Auto : Performs continuous auto-focus.

Manual : Changes the camera mode to Manual Focus.

Digital Zoom : Set the use of the digital zooming function. If it set to <Off>, the

optical zoom still operates but the digital zoom will not be activated at the maximum

end of the optical zoom.

Flip mode : If you set it to ON, the image will be displayed reversely.

DIS (Digital Image Stabilizer) : Corrects the display of an image that is shaking slightly.

With DIS, you can obtain a sharp image even if the camera is affected by the

surrounding vibrations or shaking.

This is useful, especially when you install the camera on the top of a long pillar, in the

middle of a bridge, or on the shoulder of a highway or in a windy place.