User manual

English _61

● SETUP SCREEN

Unlike the optical zoom, the graphics quality of the digital zoom decreases as its zoom ratio

increases.

The auto-focus function may not operate normally under the following conditions :

- Bright lighting, blinking lighting such as a neon sign

- When background illumination is low

- While Slow-Shutter is in operation

- Dark object

- When background illumination is too high

- If a long distance object and a close distance object appear together within a monitoring area

- If there is no contrast, e.g. Ceiling or a wall

- If the camera is facing a thin horizontal line

Auto Focus focuses on an object in the center of the screen; objects around the screen edges

may not be properly in focus.

To set the white balance

The White Balance menu adjusts the balance of the screen colors under different lighting

conditions.

You can set the white balance separately for Day mode and Night mode.

Select Day mode.

Select a white balance mode for the

daytime condition from ATW1/ATW2/

AWC/3200K/5600K.

ATW1, ATW2 : The camera can

automatically adjust the color

temperature in real time, according to the ambient conditions. The allowable

temperature range is between 2500K and 9300K for ATW1, and between 2000K

and 10000K for ATW2.

AWC: Perform the auto white balance once for the current video.

3200K : Mode that is optimized for 3200K for the color temperature.

5600K : Mode that is optimized for 5600K for the color temperature.

Adjust the strength by selecting a value between -32 and 32 for each of red and

blue settings.

Select Night mode.

Select a white balance mode for the nighttime condition from ATW1/ATW2/AWC/

3200K/5600K/Off.

Set the values of Red Adjust and Blue Adjust for each white balance mode.

