User manual

setup screen

62_ setup screen

If NIGHT mode is set to <Off>, the <White Balance> will operate in a mode speciﬁ ed in DAY

mode at all times; otherwise, the screen will switch to a mode speciﬁ ed in <Day/Night>.

White Balance may not work properly under the following conditions.

- When the color temperature of the environment surrounding the subject is out of the control

range.

- When the ambient illumination of the subject is dim.

- If the camera is directed towards a ﬂ uorescent light or is installed in a place where illumination

changes dramatically, White Balance adjustments may not deliver consistent results.

To set the Exposure

The Exposure settings are to control the camera’s exposure meter.

IRIS Setting

Set the iris to either ALC or Manual.

ALC : You can set both iris level and

backlight in auto mode.

Manual : You can set the iris level

manually.

Select an iris level between -32 and 32.

If you set the iris mode to ALC, select an

iris level and set the backlight mode.

Select one from Off/BLC/WDR in backlight.

Off : Do not use the backlight mode.

BLC : You can specify a desired area on the video manually and set the area to

be displayed more clearly.

WDR : Display a sharp image of the objects in a scene where both bright and

dark areas exist.

If you set the backlight mode to BLC, you can configure the backlight settings.

If you set the backlight mode to WDR, configure the settings of WDR Weight, WDR

Level and WDR WB.

WDR Weight : Select one from Low/Middle/High.

WDR Level : Select one between -9 and 9.

WDR Auto W/B : Select either Indoor or Outdoor.

If you set the backlight mode to BLC, you can specify a backlight area.

