User manual

English _65
● SETUP SCREEN
PIP
You can view a main image with a sub image on the same screen.
To set the privacy zone
You can specify a certain area of the camera video to be protected for your privacy.
Select <
Privacy area > from <Area>.
Select <On> in <Privacy area>.
Click an area on the image and select 4
corner points to specify a desired zone.
A popup appears where you enter a name
for the zone and click [OK ( )].
Do not drag an area to specify a privacy zone.
To delete the selected area, click
[Delete
( ) ].
When done, click [Apply (
)].
You can specify up to 12 zones.
To set the area for the backlight compensation.
From <Exposure>, set <Backlight> to
<BLC>.
Select <BLC> from <Area> and use
the drag and drop method to specify
an area in the preview screen.
The Add Area dialog appears where
you enter a name for the area and click
[OK (
)].
To delete the selected area, click
[Delete
( ) ].
You can specify only one area.
To display the specifi ed backlight area, select <On> for display of the backlight area.
Even if you set the option to <Off>, the actual area will be set normally.
1.
2.
3.

4.
5.

1.
2.
3.
4.

5.