User manual

setup screen
68_ setup screen
Swing
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
If Swing is active, the camera will move from the fi rst preset position to the second
preset position clockwise.
Then, it moves from the second preset position back to the fi rst preset position
counter clockwise.
If the fi rst preset is the same as the second preset position, the camera will rotate
itself in place by 360° clockwise, then rotate back by 360° counter clockwise.
You can specify the speed between 1°/sec and 180°/sec.
To configure the swing settings
Set <Mode> in <Sequence setup> to
<Swing>.
The menu screen will switch to the swing
setting screen.
Set <First preset> and <Second
preset> to specify a swing range.
Specify the speed of movement.
Press the [
] button.
The fi rst preset, second preset, speed and dwell time will be saved in set mode.
Press the [ ] button.
This will perform the command stored in the swing number.
Press the [ ] button.
This will stop the currently running swing.
y
1.
2.
3.
4.
5.
6.
Second Preset
First Preset

Counter Clockwise

Clockwise