User manual

setup screen
86_ setup screen
User
From the Setup menu, select the
<System ( )> tab.
Click <User>.
Provide the necessary user information.
Administrator Password Change :
Change the current password for the
administrator.
Guest setup : If <Guest access> is
permitted, any guest can access the
Web Viewer screen but can view only the Live viewer screen.
Current users : You can change the user information and adjust the permission
level for a user who is set to <Enable>.
Video : You can select a video profi le in the Liver viewer screen.
Audio-In : The audio input option will be activated in the Live Viewer screen.
Controls : You can control the camera menu, PTZ, Mic. and Alarm button.
When done, click [Apply (
)].
Upgrade / Reboot
From the Setup menu, select the
<System ( )> tab.
Click <Upgrade / Reboot>.
Select a desired item and set it
appropriately.
Upgrade : Performs upgrading the
system.
Factory default : Resets the system
to the factory default.
Except network parameter : Reset the other settings except for the interface/
port/DDNS/IP fi ltering settings.
All : Resets all settings including the camera settings. (however, the log
information will not be reset)
If you reset all settings, the IP address will be defaulted to 192.168.1.100.
Confi guration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
Restart : Restarts the system.
1.
2.
3.
y
y
y
-
-
-
4.
1.
2.
3.
y
y
-
-

y
y