Operation Manual

installation & connection
28_ installation & connection
INSERTING/REMOVING A SD MEMORY CARD
J
`
Disconnect the power cable from the camera before inserting the SD memory card.
`
Tighten the screws when assembling the camera body, shield cover and SD holder bracket to
prevent moisture penetration.
`
When mounting or dismounting an SD memory card, place the main body on the floor first to
prevent part loss and falling accident.
Inserting a SD Memory Card
1. Separate with hands the screws in front of and on
the rear of the shield cover.
2. Unfasten four screws by turning them
counterclockwise using a driver to separate the
shield cover.
3. Unfasten two screws on the SD holder bracket by
turning them counterclockwise using the driver.
J
`
Do not remove the screws.