Operation Manual

English _73

● SETUP SCREEN

To configure the detailed settings for the preset

1. Select the number of preset that you

want to configure.

• After action : For <After action>,

execute the given preset and specifiy

whether to run automatic trace/

automatic execution/ image analysis

motion. (This setting does not apply

in the swing function.)

- Auto tracking : Run the automatic

trace motion until the configured trace time.

- Auto run : The sequence setting for auto execution is performed. If you turn off the

function or if there is no auto-executing operation, the preset operation status is

maintained. (This setting is not applied if preset is run with a group or tour function.)

- Video analysis : MD/VA operation is run.

• Camera setup : You can change the camera setting to the environment of the

selected preset.

Refer to “Camera setup” for how to set the camera. (page 87)

• MD / VA : You can set the system to generate an event signal when a movement

is detected in the preset, or an intelligent video analysis event is detected.

For more details, refer to “MD / VA”. (Page 120)

2. When done, click [Apply (

)].

After saving the preset setting, make sure to select <Sequence Setup> or run the preset. If

the operation is not performed, the system may run a wrong operation, such as an unintended

change of preset setting.

While setting preset edit, you cannot use the functions, such as preset setting, home position

setting and move to the home position.