Operation Manual

English _85

● SETUP SCREEN

To set the privacy zone

You can specify a certain area of the camera video to be protected for your privacy.

1. Set it to <On>.

2. Select the color masking of desired

privacy area.

3. When done, click [Apply (

)].

4. Click [▼ Show].

5. Place the cursor at a point in the video

and drag it to whatever you need.

Move the set area to the center of the

screen by controlling pan/tilt.

6. Check whether the field indicated on

the screen is consistent with the field to

be set and enter the name. When not

using the zoom indication restriction

function, select [Off] and then click on

the [OK] button. If the displayed field

and setting field are different, press on

the [Cancel] button and reset.

7. When using the zoom indication restriction function, select [On] and click on the [OK]

button. The privacy field will be set and a popup will appear. At this time, move to

the zoom position that you wish to set for the zoom operation and click on the [OK]

button. To cancel the privacy field setting, click on the [Cancel] button and reset.

The privacy field can be set only when shaking compensation (DIS, digital image stabilizer) is not used

and when zoom is under 23x.

Privacy fields that apply zoom indication restriction functions are shown with [ZOOM] following the

name.