Safety instructions and precautions are designed to protect users and prevent any property damage. Please read and observe these instructions thoroughly before using the SNT-1010.
Preparation Preparation Features Before You Start Various Communication Protocol Support Monitoring Through Web Browser Icons for the Safety Precautions This product supports support various communication protocols such as ARP, HTTP and DHCP as well as TCP/IP, UDP, SMTP for e-mail transmission and FTP protocol. Monitoring Through Web Browser This product enables watching a video through an Internet web browser so that you can watch a video through the Internet as you can within the local network.
Preparation Preparation Contents System Requirements Recommended PC Specifications Chapter 1 Preparation 2 3 4 5 6 8 Dynamic IP Setting ................................. 37 Chapter 1 Preparation Features ........................................................ Before You Start ......................................... Contents ....................................................... System Requirements .............................. Safety Precautions ....................................
Preparation Safety Precautions Warning To avoid physical damage and loss of property, please read and follow the safety precautions given below. If you do not follow the instructions,it may cause a serious physical damage. If you do not follow the instructions, it may cause a serious physical damage. There is a risk of fire, electric shock or physical injury. Use the AC adapter authorized by the company only. (DC 8.4V/1A) Using an unauthorized AC adapter may cause fire,electric shock or malfunction.
Preparation View of SNT-1010 Front View Rear View Chapter 1 Preparation 1 Network LED 2 Status LED ( * ) 3 Power LED 3 4 5 6 7 1 8 4 IP Select Switch 5 Audio IN Port 6 Audio OUT Port 7 Video IN Port 8 Video OUT Port * Status LED (Indicates the operational status of SNT-1010).
Preparation Installing and Connecting View of SNT-1010 (Continued) Installing SNT-1010 Accessories To install on a floor or wall. Disconnect the power cable before installing or moving the product. Assemble as follows for both sides of the main body. Power Cable AC Adapter (DC 8.
Installing and Connecting Installing and Connecting Installing SNT-1010 (Continued) Connecting SNT-1010 If you connect the SNT-1010 to the Internet and setup the network settings,you can monitor the picture of the connected camera in real-time. To connect to RS-485 To install onto a dedicated shelf Assemble as follows for both sides of the main body. Chapter 2 Installing and Connecting 3 2 You can use the rear port of SNT-1010 to connect to the RS-485 device.
Installing and Connecting Connecting SNT-1010 (Continued) RS-485, ALARM I/O Block Diagram To Connect a Camera Input the camera. SNT-1010 the [AUDIO IN ] port of the SNT-1010 2 Connect and the AUDIO OUT port of the camera. If the camera provides an AUDIO OUT port.
Installing and Connecting Connecting SNT-1010 (Continued) To connect to Audio Input/Output Audio I/O Block Diagram Microphone SPEAKER the [AUDIO IN ] port of the SNT-1010 with the LINE OUT portof the amplifier that the 1 Connect microphone is connected to. Microphone Pre-Amp Pre-Amp Connecting the SNT-1010 Network Pre-Amp Chapter 2 Installing and Connecting PC Computer LINE-OUT SPEAKER 2 Connect the [AUDIO OUT ] port of the SNT-1010 with the LINE IN port of the speaker. Audio Codec :G.
Installing and Connecting Connecting SNT-1010 (Continued) Network Connection & Setup You can set up the SNT-1010 network settings according to your network configurations.
Network Connection & Setup To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem This is for a small network environment such as homes, SOHO and ordinary shops. [ STEP 2 ] To connect the IP sharer to a xDSL /Cable modem SNT-1010 1 an Internet browser on the local PC 1 Launch connected to the IP Sharer. SNT-1010 2 IP Sharer xDSL or Cable Modem xDSL or Cable Modem 4 5 External Remote PC the IP Sharer’s address in the 2 Enter address bar of the browser. ex) http://192.168.1.1 ,http://192.
Network Connection & Setup To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem (Continued) [STEP 3 ] To check if the IP sharer is connected to the xDSL /Cable modem properly B. If the IP sharer is connected to an xDSL modem using DHCP 4 the IP Sharer’s address in the 2 Enter address bar of the browser. ex) http://192.168.1.1 ,http://192.168.0.1 or http://192.168.xxx.1 For the address of the IP sharer, refer to the product’s documentation. the password.
Network Connection & Setup To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem (Continued) Network Connection & Setup Connect SNT-1010 to an IP sharer with local area networking This is for a large network environment such as corporate office, building, public office and factory.
Network Connection & Setup Connect SNT-1010 to an IP sharer with local area networking (Continued) [ STEP 2 ] To configure the network settings of the IP Sharer 4 5 2 Enter the IP Sharer’s address in the address bar of the browser. ex) http://192.168.1.1 ,http://192.168.0.1 or http://192.168.xxx.1 For the address of the IP sharer, refer to the product’s documentation. the password. For the login IP and the password, refer to the IP sharer’s documentation.
Network Connection & Setup Connect SNT-1010 to an IP sharer with local area networking (Continued) [ STEP 4 ] To connect a local PC in the IP sharer to SNT-1010 [ STEP 5 ] To connect to SNT-1010 from an IP sharer external PC different. this case, you can use the DDNS URL of SNT-1010 or the Internet IP address of the IP 2 Insharer to connect to the IP sharer internal SNT-1010.
Network Connection & Setup Network Connection & Setup is enabled for a modem Connect SNT-1010 directly to a DHCP-based xDSL/ This using DHCP. Cable modem Connect SNT-1010 directly to local area networking xDSL or Cable Modem SNT-1010 Switch HUB External Remote PC SNT-1010 2 External Remote PC Firewall DDNS Server (Data Center, KOREA) Local PC DDNS Server (Data Center, KOREA) 1. Position the IP selection switch to D (Dynamic IP). 2.
Network Connection & Setup Static IP Setting Searching for SNT-1010 (Continued) Manual Network Setting IP Installer screen layout 2 3 4 5 Run the program and display the found SNT-1010 list on the screen. For the initial run,the [Auto Set] and [Manual Set] button are all disabled. 6 1 2 Confirm the MAC Address of the SNT-1010 on its rear panel. The [Auto Set] and [Manual Set] button are activated. 2 Click the [Manual Set] button. 7 8 9 The Manual Set window appears.
Static IP Setting Manual Network Setting (Continued) 4 Note 5 If more than one SNT-1010 are connected to an IP Sharer set the IP and port Settings for SNT-1010’s differently. Example) Items IP Related Items Note 2st SNT-1010 IP Address 192.168.1.200 192.168.1.201 Subnet Mask 255.255.255.0 255.255.255.0 Gateway 192.168.1.1 192.168.1.
Static IP Setting Dynamic IP Setting Automatic Network Setting Before You Start! Run the program and display the found SNT-1010 list on the screen. In the initial run, the [Auto Set] and [Manual Set] button are all disabled.
Dynamic IP Setting When Using an IP Sharer Dynamic IP Setting (Continued) Port Forwarding (Port Mapping) Setting With SNT-1010 installed on an IP sharer, you must set the port forwarding for the IP sharer before an IP sharer external remote PC can connect to the IP sharer internal SNT-1010. Dynamic IP Check Manual Port Forwarding 1 from the Settings menu of the IP Sharer.
Using SNT-1010 Connecting to SNT-1010 (Continued) To connect to SNT-1010 General Run an Internet browser. Enter the IP address for SNT-1010 in the Address input box. Example) IP Address : 192.168.1.200 http://192.168.1.200 - The Login screen appears. A DDNS address consists of ++.
Using SNT-1010 Using SNT-1010 Connecting to SNT-1010 (Continued) Installing ActiveX To login If you connect the SNT-101 to the Internet and configure the network settings, you can monitor the picture of the connected camera in real-time. For Windows 2000/Windows XP If the Security Warning window appears, click the Yes button. 1 Type root in the input box. 1 2 3 2 Type 4321 in the input box. If you have changed the old password, type the new password here.
Using SNT-1010 Using SNT-1010 Using the Viewer Screen If you connect to an SNT-1010, the following Viewer screen appears. Main Screen Layout Viewer Screen Buttons and Functions Button Function and Description 2 3 4 Moves to the SETUP screen. 5 You can view information, version, manufacturer, etc. 6 7 8 A logo image set in the 9 of the SETUP screen appears here. If a logo link is set, you can open the linked site by clicking it.
Using SNT-1010 Viewer Screen Buttons and Functions (Continued) Button Function and Description To Capture a Video If the screen size is , each video channel is displayed by turns. If the screen size is , 4 videos channels are displayed by turns. Captures the current picture on the screen and saves it as a .jpg or .bmp image file. 1 At a desired scene, click the [CAPTURE] button. The capture confirmation window appears. 2 Click [OK].
Using SNT-1010 Setting Up Viewer Screen Buttons and Functions (Continued) Setting SNT-1010 You can set various functions such as Basic Setting, System, Layout, etc. To use the camera related functions These functions are activated only if they are supported by the camera and are the same as the camera settings. In the viewer screen, click the [SETUP] tab. Moving lens direction and selecting a menu The SETUP screen appears. - You can adjust the camera lens direction using the 8 direction buttons.
Setting Up Basic Configuration Setting Video To setup IP settings You can set the video format, size, resolution, frames per second for and . IP Setting window appears. The VIDEO CONFIGURATION window appears. To complete the setting, click the [Apply] button. To complete the video setting, click the [Apply] button. The settings are saved and the system is restarted. The currently opened web browser is closed. Chapter 8 Setting Up Click .
Setting Up Basic Configuration (Continued) To setup users To modify a registered user account the
Setting Up Basic Configuration (Continued) To setup an external SNT-1010 To modify a registered SNT-1010 The EXTERNAL SNT-1010 window appears. 3 2 In the EXTERNAL SNT-1010 window, click the [Modify] button. The window appears. To complete the setting, click the [Apply] button. 4 The settings are saved. 3 Modify the IP, HTTP Port, Login ID or Login PW. Modifying a registered SNT-1010 is complete.
Setting Up Setting Up Basic Configuration (Continued) System Configuration To set the record/capture saving path To setup date and time Click The LOCAL SAVE PATH window appears. . The Date/Time window appears. To complete the setting, click the [Apply] button. The settings are saved. : Sets the time by synchronizing with the selected NTP server (time server).
Setting Up System Configuration (Continued) To check the connection status To update the software . Click The Status window appears showing the connection status. . The Software Update window appears. of them. The connection status is updated every 5 seconds. To download the latest version of the software, visit Samsung Electronics web site www.samsung.com. To view the log information The update files are named such as SNT-1010-V1.1-20060531.tgz.
Setting Up System Configuration (Continued) To reset the system To setup RS485 Setup the RS485 port of the system Click . Click The Reset window appears. . The RS485 window appears. To complete the setting, click the [Apply] button. The settings are saved. System Configuration : The Reset window appears. : Initializes the system settings to the factory settings and then restarts the system.
Setting Up Layout Configuration You can display image, text, logo and banner on the screen. To set an overlay image To upload an image the OVERLAY IMAGE window, click the [Browse] 1 Inbutton.
Setting Up Layout Configuration (Continued) To set text To set viewer screen Click LOOK>. : Select a date display format.
Setting Up Layout Configuration (Continued) To view HTML code To upload a logo 3 Click HTML>. field.
Setting Up Event Configuration To set the image transmission function To test FTP transmission Click SETUP>. Click the [Test] button. Connect to the configured FTP server and conduct image transmission test automatically. message will be displayed. If the test fails, an error message appears.
Setting Up Event Configuration (Continued) To set an alarm image To set an alarm input You can set an image to be sent through FTP/ e-mail(SMTP) when an alarm is generated or during the scheduled transfer. Click INPUT>.
Setting Up Event Configuration (Continued) To set the motion detection function To set a motion detection target area You can set a specific area to detect a motion in.
Setting Up Event Configuration (Continued) To set video signal loss detection function To set scheduled transmission You can set an alarm to be generated when the video signal from a camera to SNT-1010 is lost. Click TRANSFER>.
Setting Up Network Configuration To set video streaming To set IP address automatic notification Click NOTIFICATION>. Click . : It is a general purpose protocol used for a transmission that requires reliability.
Setting Up Appendix Network Configuration (Continued) Resetting the System You can initialize all settings of this product when it does not work properly or causes a problem.
Appendix Trouble-shooting I can’t connect to SNT-1010 using the web browser. Check if the settings of your SNT-101 are correct. If I press the button, does that mean my settings are automatically applied? No,it doesn’t. just shows the current image on the screen. Make sure to press the button before your settings can be applied. If you are using the DDNS URL,check if the MAC address is entered correctly.
Appendix Appendix Trouble-shooting (Continued) Specifications OS I can’t control over the PTZ device First, check the settings of . Refer to the user guide of the external device connected to SNT-1010 for correct settings. Browser DirectX The menu of the external PTZ device appears somewhat later. Or, the response from the external PTZ is delayed when I manipulate it. The amount of data is comparatively great considering the network transfer rate.
Appendix Specifications (Continued) Half / Full duplex Mode, PTZ Control Auto pan, preset, scan, pattern, Power PTZ function support RS485 PTZ control Pan / Tilt / Zoom control IP Installer Ip address installation 1CH Recording Playback IP installation function (XP, win 2000 support ) Software upgrade by web browser Login access Level Guest, Administrator, Operator, User Dynamic IP Notify SMTP(E-mail), FTP Time setting NTP, Time Zone, Summer Time setting Max 10min record can be recorded when PC Hard
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries,so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
of each source file to most effectively convey the exclusion of warranty ; and each file should have at least the "copyright" line and a pointer to where the full notice is found. This program is free software ; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation ; either version 2 of the License, or (at your option)any later version.
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". 92 option offer warranty protection in exchange for a fee. 2.
time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2)will operate properly with a modified version of the library, if the user installs one,as long as the modified version is interfacecompatible with the version that the work was made with.
15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "ASIS" WITHOUT WARRANTY OF ANYKIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU.
names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob'(a library for tweaking knobs)written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice Copyright (c)1998-2006 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met : 1.
MEMO Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
