User Manual
30
# MANUAL MODE
●
To see only one camera picture regardless of other cameras, please press MODE key
and set the monitor as sequential switching mode.
●
The channel is selected by C1~C4 buttons, one of C1~C4, or one of C5~C8. When you
push the button with disconnected camera, NO VIDEO will be appeared.
●
The channel can be changed form C1~C4 or C5~C8 respectively.
●
“Page A/B” key canchange the page C1~C4 or C5~C8 .
●
If you push MENU key the display is freeze, push it again released.
●
MODE key can change sequential mode from manul mode.
●
When in the manual mode, set the Freeze mode by pressing the MENU key.
$ Small PIP MODE (Picture In Picture)
●
Pushing MENU key, main channel display can be freeze or melt.
●
MODE key can change large PIP mode from small PIP mode.
% Large PIP MODE
●
Pushing MENU key, main channel display can be freeze or melt.
●
MODE key can change quad mode from large PIP mode.
^ VCR MODE
●
VCR records only the picture as shown on the monitor. -caution.!
●
To see the recorded picture, press the VCR key on the system.
●
But it doesn’t work at menu mode.
●
Pushing VCR key again, mode is on as before.
●
At VCR mode, displays of each quad can be zoomed by C1~C4 key.
●
Z.1~Z.4 is displayed by OSD and VCR status LED is blinked.
●
This is also released by pushing VCR key again.
●
At VCR displaying, the displays can be freeze or melt by MENU key.
●
At VCR mode, the system works only with C1~C4, , ,MENU, VCR key.