COLOUR TELEVISION SP43L2HX SP50L2HX SP61L2HX SP46L5HX SP56L5HX Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Safety Instructions ENG ◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the television to direct sunlight and other sources of heat. ◆ Do not expose the television to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the television. ◆ During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.
ENG Contents ◆ FOREWORD ■ ■ ■ Safety Instructions ......................................................................................... Caution .......................................................................................................... Replacing the Lamp....................................................................................... 2 2 5~6 ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Control Panel of Your Television ......................................
ENG Contents (continued) ◆ USING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Adjusting the Sound Settings ........................................................................ 37 Adjusting the Volume Automatically .............................................................. 37 Setting the Dolby Pro Logic ........................................................................... 38 Adjusting Your Dolby Preferences.................................................................
Replacing the Lamp (SP43L2HX/SP50L2HX/SP61L2HX) ENG 1 Use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp. 4 Separate the Lamp from the engine by holding the handle and pulling it out. 5 To reinstall the Lamp, follow these steps in reverse order.
Replacing the Lamp (SP46L5HX/SP56L5HX) ENG 1 Use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp. 4 Separate the Lamp from the engine by holding the handle and pulling it out. 5 To reinstall the Lamp, follow these steps in reverse order.
Control Panel of Your Television ➢ The actual configuration on your TV may be different, depending on your model.
Control Panel of Your Television (continued) ENG ( :On, :Blinking, TIMER LAMP :Off) STAND BY/TEMP Indication Standby mode. A timer pilot lights when Timer Auto On or Off is selected. Normal operation. Normal operation (when Timer Auto On or Off is selected). Lamp is warming up. The normal picture comes on after 25 seconds. The normal picture comes on after 25 seconds. (when Timer Auto On or Off is selected) Air vent cover in the rear of the TV is not properly installed.
Connection Panel of Your Television ➢ The actual configuration on your TV may be different, depending on your model. ENG Side of the TV SP43L2HX/50L2HX/61L2HX SP46L5HX/56L5HX a c b ( a ) Video Input a ( b ) Audio Inputs ( c ) S-Video Input b c Rear of the TV e d j b f g i a h c S-VIDEO 1 S-VIDEO 2 a) 75Ω Coaxial connector for Aerial or Cable Network. b) MONITOR OUT / AV1 / AV2 / AV3 Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
Connecting to an Aerial or Cable Television Network ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television.
Connecting Additional Speakers ENG To take advantage of the surround sound system, connect additional speakers.
Infrared Remote Control ENG POWER ON/OFF PICTURE EFFEECT SELECTION PICTURE SIZE WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECED MODE (TV, VCR, CATV, DVD OR STB) AND REMAINING BATTERIES ON LED MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CABLE-BOX (CATV), DVD PLAYER, OR SET-TOP BOX (STB) DIRECT CHANNEL SELECTION SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED ONE OR TWO-DIGIT CHANNEL SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF NEXT CHANNEL/ TELETEXT NEXT PAGE EXTERNAL INPUT
Switching Your Television On and Off ENG The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ 2 The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. Press the “ I ” button (On/Off) on the side of the television. Result: 3 TV The Standby indicator on the side of the television lights up. Press the POWER ( television on.
Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button to Used to display the next stored channel. - Used to display the previous stored channel. - ➢ Used to select a channel numbered ten or over. Press this button, and the “--” symbol is displayed. Enter the two-digit channel number.
Plug & Play Feature ENG When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. Plug & Play Press ENTER to start Plug & Play. 1 If the television is in Standby mode, press the POWER ( on the remote control. Result: ) button Start The message Plug & Play is displayed. It flickers for a little while, and then the Language menu is automatically displayed.
Plug & Play Feature (continued) ENG If you want to reset this feature... 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Setup. The options available in the Setup group are displayed. Result: 3 Press the ENTER ( 4 Press the † or … button to select Plug & Play. Press the ENTER ( ) button. Result: TV Setup Time Plug & Play Language Melody Blue Screen Film Mode Image Lock Move : English : Off : Off : Off Enter 5 ) button.
Storing Channels Automatically ENG You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 2 3 4 Area Press the MENU ( ) button. The main menu is displayed. Result: Auto Store √ Manual Store √ Edit √ Fine Tune √ √ LNA Move Enter : Asia/W.Europe Asia / W.
Storing Channels Manually ENG TV You can store up to television channels, including those received via cable networks. Channel : Asia/W.Europe √ Area Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ LNA ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify √ : Off Move When storing channels manually, you can choose: Enter Return 1 Press the MENU ( ) button. The main menu is displayed.
Storing Channels Manually (continued) ENG 7 If you know the number of the channel to be stored, see the following steps. ◆ Press the œ or √ button to select Channel. ◆ Press the † or … button to select C (Air channel) or S (Cable channel). ◆ Press the √ button. ◆ Press the numeric buttons (0~9) to select indicate the required number. no sound or abnormal sound, re-select the sound standard ➣ Ifrequired. 8 If you do not know the channel numbers, select the Search by pressing the œ or √ button.
Skipping Unwanted Channels ENG ◆ Skipping unwanted channels TV You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. Channel : Asia/W.Europe √ Area Auto Store √ Manual Store √ Edit √ Fine Tune √ √ Ch.
Sorting the Stored Channels ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using ATM. You can delete those channels you do not want to keep. 1 TV Channel Country Press the MENU ( ) button. The main menu is displayed. Result: : Austria √ Manual Store √ Edit √ Fine Tune √ √ Ch. Scan 2 3 4 5 Press the † or … button to select Channel. The options available in the Channel group are Result: displayed.
Assigning Names to Channels ENG TV Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ LNA √ : Off Move TV Enter Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. 3 Press the ENTER ( 4 Press the † or … button to select Edit. Press the ENTER ( button. The Edit menu is displayed. Result: 5 Press the † or … button to select Name.
Activating the Child Lock ENG ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. TV Channel Country : Austria √ Manual Store √ Edit √ Fine Tune √ √ Ch. Scan 1 2 LNA Press the MENU ( ) button.
Selecting a Channel by Information ENG You can display the list of stored channels. 1 Press the CH INFO. button. Result: A list is displayed with the first 5 channels. Two text boxes to the right of the list indicate: ◆ Whether the Teletext feature is available. ◆ Which sound mode is being used. Information 2 Prog. 2 3 4 5 6 --------------------- ✽ ✽ ✽ ✽ ✽ Move To scroll through the stored channels, press the † or … button. Result: The corresponding channel is displayed.
Changing the Picture Standard ENG You can select the type of picture which best corresponds to your viewing requirements. 1 TV Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Picture. The options available in the Picture group are Result: displayed. 3 Press the ENTER ( ) button. The Mode is selected. Result: 4 Press the ENTER ( ) button again. The options available are listed.
Adjusting the Picture Settings ENG TV Your television has several settings which allow you to control picture quality. Picture Mode Custom Color Tone Color Adjust Size Digital NR DNIe PIP Move TV √ √ √ √ √ √ √ √ : Dynamic : Normal : 16 : 9 : On : On Enter Custom 70 50 70 50 Enter Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Picture. The options available in the Picture group are Result: displayed.
Adjusting the Picture Settings (PC or DVI Mode) ➢ 1 2 Preset to the PC or DVI mode by using the SOURCE button. ENG Press the MENU ( ) button. The main menu is displayed. Result: Press the ENTER ( 4 Press the † or … button to select Custom. Press the ENTER ( ) button. Result: ) button. The Custom menu is displayed. : Custom : 16 : 9 : On : On Enter TV Press the ENTER ( 7 Press the MENU ( Custom Contrast Brightness 70 50 ) button to confirm. Move 8 9 Enter Return ) button.
Setting the Picture (PC Mode) ➢ ENG 1 TV Preset to the PC mode by using the SOURCE button. Press the MENU ( ) button. Setup Time Plug & Play Language Melody Blue Screen Film Mode Image Lock : English : Off : On : Off Move TV √ √ √ √ √ √ √ Enter Result: 2 The main menu is displayed. Press the † or … button to select Setup. Result: The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Image Lock. Press the ENTER ( ) button.
Using the Fine Tune ENG If reception is weak, you can fine tune a channel manually. TV 1 2 Press the MENU ( ) button. The main menu is displayed. Result: Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. 3 Press the ENTER ( 4 Press the † or … button to select Fine Tune. Press the ENTER ( ) button. Result: 5 Channel Area Auto Store √ Manual Store √ Edit √ Fine Tune √ √ Ch. Scan LNA √ : Off Move ) button.
Viewing the Channel Scan Picture ENG TV Channel Area : Austria 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. 3 Press the ENTER ( 4 Press the † or … button to select Ch. Scan. Press the ENTER ( ) button. √ Auto Store √ Manual Store √ Edit √ Fine Tune √ √ Ch. Scan LNA : Off Move Ch. Scan Enter √ Return Result: ) button.
Using the LNA (Low Noise Amplifier) Feature ENG This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. TV This feature is working only weak signal condition, and that is memorized on current channel, additional. 1 Channel Area Press the MENU ( ) button. The main menu is displayed. Result: : Austria √ Manual Store √ Edit √ Fine Tune √ √ Ch.
Selecting the Picture Size ENG You can select the picture size which best corresponds to your viewing requirements. Picture TV Mode Custom Color Tone Color Adjust Size Digital NR DNIe PIP Move : Normal : 16 : 9 : On : On Enter TV √ √ √ √ √ √ √ √ : Dynamic 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the ▲ or ▼ button until the Picture is selected. The options available in the Picture group are Result: displayed.
Using the Digital NR (Digital Noise Reduction) Feature ENG If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 2 Press the ▲ or ▼ button until the Picture is selected. The options available in the Picture group are Result: displayed. Press the ENTER ( 4 Press the ▲ or ▼ button until the Digital NR is selected. Press the ENTER ( ) button.
DNIeTM (Digital Natural Image engine) ENG TV This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, much detailed image to you. DNIeTM technology will fit every signals into your eyes.. Picture Mode Custom Color Tone Color Adjust Size Digital NR DNIe PIP Move : Dynamic : Normal : 16 : 9 : On Off : On Demo On Enter Return DNIe Demo DNIe On 1 Press the MENU ( ) button.
Setting the Blue Screen ENG If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“. 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Setup. The options available in the Setup group are Result: displayed. 3 Press the ENTER ( 4 Press the † or … button to select Blue Screen.
Changing the Sound Standard ENG TV You can select the type of special sound effect to be used when watching a given broadcast. Sound Mode √ : Custom √ Custom Auto Volume : Off √ Surround : Off √ Audio Out : Off √ Internal Mute : Off √ Move TV Enter Return 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Sound. The options available in the Sound group are displayed. Result: 3 Press the ENTER ( ) button. The Mode is selected.
Adjusting the Sound Settings ENG The sound settings can be adjusted to suit your personal preferences. TV 1 2 Press the MENU ( ) button. The main menu is displayed. Result: Press the ENTER ( 4 Press the † or … button to select Custom. Press the ENTER ( ) button. Result: 5 : Custom Auto Volume : Off √ Surround : Off √ Audio Out : Off √ Internal Mute : Off √ ) button. Move Enter TV The Custom menu is displayed with the current option.
Setting the Dolby Pro Logic ENG This mode allows you enjoy Dolby Pro Logic Surround effect fully with only surround speakers are connected to TV. This allows various modes for the main, center and rear speakers to be selected.
Adjusting Your Dolby Preferences ENG The following Dolby settings can be adjusted to suit your personal preferences. TV ◆ Volume of the centre and rear speakers Surround Mode Center Rear Time Delay Test Tone ◆ Pro Logic delay time for the rear speakers (between 15 and 30 ms) : Pro Logic : 0dB : 0dB : 20ms : Off √ √ √ √ √ ◆ Activation/deactivation of the test tone to simulate the volume on each speaker Move 1 Press the MENU ( ) button. The main menu is displayed.
Setting the External Sound ENG TV This feature allows you can adjust to suit your personal preferences when the equipment with output is connected to the television. Sound Mode : Custom Custom Auto Volume : Off Surround : Off Audio Out : Off Off : Off On Internal Mute Move TV Enter Return Sound Mode 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Sound. The options available in the Sound group are displayed.
Selecting the Sound Mode (depending on the model) ENG The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.
Setting the Melody Sound ENG TV You can hear clear melody sound when the television is powered on or off. Setup Time Plug & Play Language Melody Blue Screen Film Mode Image Lock Move TV : English : Off : On : Off Enter √ √ √ √ √ √ √ Return Setup Time Plug & Play Language Melody Blue Screen Film Mode Image Lock Move 42 : English : Off Off : On On : Off Enter Return 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Setup.
Setting the Sleep Timer ENG You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. 1 Press the MENU ( Result: 2 TV ) button. The main menu is displayed. Press the † or … button to select Setup. Result: Setup Time Plug & Play Language Melody Blue Screen Film Mode Image Lock The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Time. Press the ENTER ( button..
Setting and Displaying the Current Time ENG TV Setup Time Plug & Play Language Melody Blue Screen Film Mode Image Lock Move TV √ √ √ √ √ √ √ : English : Off : On : Off Enter You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. ➣ 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the ▼ or ▲ button to select Setup.
Switching the Television On and Off Automatically ENG You can set the television’s clock and set the On or Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select TV ◆ Switch off automatically at the time you select ➣ Setup Time Plug & Play Language Melody Blue Screen Film Mode Image Lock The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on the previous page).
Viewing an External Signal Source ENG TV Input Source √ : TV Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxs and the TV source (broadcast or cable) √ Edit Name 1 Press the MENU ( Result: Press the ▼ or ▲ button to select Input . 2 Move TV Enter Return Source TV AV1 AV2 AV3 AV4 Component1 Component1 † More Move TV ---------------------Enter Result: Press the ENTER ( 4 Press the ▼ or ▲ button to select Source.
Viewing the Picture In Picture (PIP) ENG You can display a sub picture within the main picture of TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Picture. The options available in the Picture group are Result: displayed. 3 Press the † or … button to select PIP.
Viewing the Picture In Picture (PIP) (continued) ENG TV PIP PIP Source Swap Size Position Prog. Sound Select : On : TV Move Enter Press the † or … button to select Position. Press the ENTER ( ) button. 9 : : : P08 : Main Result: Return Press the † or … button to select Prog.. Select the channel that you want to view through sub picture by pressing the ENTER ( ) button. 10 PC or DVI Mode TV The positions available are displayed. - PIP PIP Source Swap Size Position Prog.
Listening to the Sound of the Sub Picture (PC or DVI Mode) ➢ Preset to the PC or DVI mode by using the SOURCE button. ENG During the PIP feature is activating, you can listen to the sound of the sub picture. 1 TV Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the † or … button to select Picture. The options available in the Picture group are Result: displayed. 3 Press the † or … button to select PIP. Press the ENTER ( button.
Teletext Feature ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part A B C D E F ➣ Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information.
Displaying the Teletext Information ENG You can display Teletext information at any time on your television Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or P button. 2 Press the TTX/MIX ( ) button to activate the teletext mode. The contents page is displayed.
Selecting Display Options ENG When you have displayed a Teletext page, you can select various options to suit your requirements. To display... 52 Press the...
Selecting a Teletext Page ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold) button.
Connecting to the External Input/Output ENG “AV3” is used for the equipment with an RGB output, such as video game devices or video disc players.
IDEO 1 Connecting to the DVD Input ENG The RCA connectors are used for equipment with a DVD output. Rear of the TV Y / Pb / Pr DVD L/R S-VIDEO 2 Connecting to the Audio Outputs The “AUDIO OUT” connectors are used for equipment, such as an audio system or external amplifier (to take full advantage of the Surround sound effect).
Connecting to the Audio/Video Input ENG The RCA (VIDEO + L-AUDIO-R) connectors are used for equipment such as camcorders, video disc players and some video game devices. Side of the TV Camcorder SP46L5HX/ SP56L5HX Video disc player SP43L2HX/ SP50L2HX/ SP61L2HX Video game device S-VIDEO 1 S-VIDEO 2 S-VIDEO 1 S-VIDEO 2 Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.
Connecting to the DVI Input ENG The “DVI” (video) and “PC AUDIO (L+R)” connectors are used for equipment with a DVI output. Rear of the TV Personal Computer and ➢ The “DVI” does not support the Analog R (red), G (green) and B (blue) signals. Connecting to the PC Input The “PC” (video) and “PC AUDIO (L+R)” connectors are used for interfacing with your PC.
Setting up Your PC Software (Windows only) ENG The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Input Mode (PC/DVI) ENG Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Standard Dot x Line VGA 640 x 480 SVGA 720 x 400 800 x 600 XGA 1024 x 768 WVGA 848 x 480 Vertical frequency (Hz) Horizontal frequency (kHz) Vertical polarity Horizontal polarity 75.0 72.8 59.9 70.1 75.0 72.2 60.3 56.3 75.0 70.1 60.0 75 72 70 60 37.5 37.9 31.5 31.5 46.9 48.1 37.9 35.2 60.0 56.5 48.3 37.5 36.
Pin Configurations ENG SCART Connector (AV1/AV2/AV3) Pin Signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ➢ DVI Input Connector (24Pin) Audio output R Audio input R Audio output L Audio chassis return Video chassis return (RGB blue) Audio input L RGB blue input Switching voltage Video chassis return (RGB green) RGB green input Video chassis return (RGB red) RGB red input Blanking signal (RGB switching) Video chassis return Blanking signal ground Video output Video input Screening/chassis r
Programming the Remote Control for Other Components ENG This TV’s remote control can operate VCR, CATV , DVD, or Set-top box (STB), in addition to controlling the TV. ➣ The remote control might not be compatible with the TV manufactured by another company. 1 Turn off your VCR, Cable box, DVD or STB. 2 Press the SELECT button. Mode is changed whenever SELECT button is pressed. 3 Press the SET button. 4 Use the numeric buttons to enter the code by manufacturer. Each code must be three digits long.
Programming the Remote Control for Other Components ENG VCR Remote Control Codes Admiral 020 Marantz Aiwa 025 Marta 006 Akai 004, 027, 032 MEI 021 Audio Dynamics Bell&Howell Broksonic Candle 007, 026 MGA 022 Midland 005 002, 003, 006, 008, 015, 055 Minolta 019, 041 021, 056 Citizen 002, 003, 006, 008, 015, 055 007 002, 024 Craig Curtis Mathes 002, 007, 008, 017, 021, 025, 056, 064, 066 003, 010, 011, 012, 013, 014, 015, 016 Daewoo 007, 026 DBX 006, 021, 024, 025 018 Canon Col
Programming the Remote Control for Other Components ENG VCR Remote Control Codes (continued) Sylvania Symphonic Tandy 021, 025, 036, 056, 059 025 018, 025 Totevision 006 Victor Tatung 037 Video Concepts Technics Teknika TMK Toshiba 025, 037, 068 021 002 Vector Research Tashika Teac 002, 006 Unitech 007, 026 026 007, 026 002 Videosonic Wards 002, 003, 006, 019, 020, 021, 024, 025, 006, 021, 025, 031 066 003, 019, 029, 051, 052 034, 038, 041 Yamaha Zenith 007, 008, 018, 026, 037 023, 027
Troubleshooting: Before Contacting Service Personnel ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ I ” button (On/Off) and the POWER ( ) button. ◆ Check the picture contrast and brightness settings.
Technical Specifications ENG The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice. Model name Tube type Screen size SP43L2HX SP50L2HX SP61L2HX SP46L5HX SP56L5HX 16:9 16:9 16:9 16:9 16:9 43 inch (953/535.5 mm) 50 inch (1107/623 mm) 61 inch 46 inch 56 inch (1351/760 mm) (1018/573 mm) (1240/697 mm) Color systems PAL, SECAM, NTSC4.43, NTSC3.
Memo ENG 66
Memo ENG 67
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
