User Manual

ENG

Programming the Remote Control for Other Components

This TV’s remote control can operate VCR, CATV , DVD, or Set-top

box (STB), in addition to controlling the TV.

➣

The remote control might not be compatible with the TV

manufactured by another company.

1 Turn off your VCR, Cable box, DVD or STB.

2 Press the SELECT button. Mode is changed whenever SELECT

button is pressed.

3 Press the SET button.

4 Use the numeric buttons to enter the code by manufacturer. Each

code must be three digits long.

Example

: To enter the code “6”, press 0, 0, and 6.

To enter the code “76”, press 0, 7, and 6.

➣

See the remote control code tables to find the appropriate

code for your particular component. If more than one code

is listed, try each one separately until you find the one that

works.

5 Press the POWER () button on the remote control.

The component you select should turn on. If it turns on, your

remote control is now set correctly.

➣

If it does not turn on, repeat steps above, but try one of the

other codes listed for the brand of particular yours.

6 Once your remote control is set up, press the SELECT button any

time you want to use the remote control to operate your VCR,

Cable box, DVD or STB.

➣

◆ When your remote control is in the VCR, CATV, DVD or

STB mode, the volume buttons still control your

television’s volume.

◆ When your remote control is in the TV or CATV mode,

the VCR or DVD control buttons (PLAY, PAUSE, etc.)

still operate your VCR or DVD.