User manual

First, check whether the IP address for the access point is fixed or dynamically allocated. Then configure the
settings in the Settings > Network > IP Settings menu of your digital photo frame.
z When an authentication process (ESSID) is configured at the access point:
{ Save your ID and password to your digital photo frame.
1. On your PC, run Notepad and write down your ID and password as shown in the fi
g
ure below,
and save it as 'essid.txt'.
2. Connect your PC to your digital photo frame using a USB cable.
3. Copy the Essid.txt file from your PC to the internal memory of your digital photo frame.
If the ID and password are different from those configured at the access point you are using, you cannot connect to
the network. If no password is configured at the access point and a password is set in the essid.txt file, or if a
password is configured at the access point and no password is set in the essid.txt file, you will also not be able to
connect to the network either.
If you add anything except your ID and password in the essid.txt file, you may not connect to the network.
|
Power
|
LAN
|
Wireless LAN
|
USB
|
Memory Card
|
Connecting via USB
Up Stream
Terminal
Used to connect your digital photo frame to a PC.
When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
the USB cable provided with the product.
Down Stream
Terminal
Used to connect an external USB-supporting device to your digital photo frame.
T
his product does not support USB card readers. Only USB stora
g
e is supported.
When connecting an external device to the down stream terminal, use the USB cable provided with
the external device. (For more information on external devices and their cables, contact a relevant
service center.)
Samsung carries no liability for external device malfunctions caused by using any cable except the
standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a
malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a service
center for that external device or your PC.