User Guide

98 2G. microSD Card
Transferring data directly to the microSD
The microSD card can be accessed and used just as
easily as any other communicating storage device.
1. From your Desktop, double-click My Computer >
[device drive letter] entry to display the folders and
files available on the internal microSD card.
2. Open a folder and begin the transfer process of
files for your computer to the internal card’s target
folder.
To remove the connection:
1. When you have finished transferring data, click the
USB device icon on your computer’s taskbar, and
follow the onscreen instructions to safely unplug
the USB cable.
2. To complete the disconnect process, touch and
drag the
Disconnect slider.
Creating Folders in the microSD Card
1. From your Desktop, double-click My Computer >
[device drive letter].
2. Right-click and select New > Folder.
Formatting the microSD Card
Formatting a microSD card permanently removes all
files stored on the card.
1. From your Desktop, double-click My Computer >
[device drive letter].
2. Right-click and select Format. (A warning will be
displayed.)
3. If you are sure you wish to remove all the files from
your microSD card, follow the onscreen
instructions.
WARNING
Do not alter or delete the four default folders.
These are used by the device to parse-out the
different file formats and contents.
Note
The formatting procedure erases all the data on the
microSD card, after which the files CANNOT be
retrieved. To prevent the loss of important data,
please check the contents before you format the
card.
Note
When a formatted card is inserted into (or detected
by) the Instinct HD, the four default folders will be
created after reboot.
M850Dash.book Page 98 Tuesday, September 29, 2009 5:21 PM