User Manual

Table Of Contents
Section 14
100 Using the Voice Services of Your Sprint PCS
Placing a Call Using Voice Dial
To place a call if Voice Dial is inactive:
1. Open the phone.
2. Press and hold down the key.
3. At the voice prompt, say the name into the phone.
The phone automatically places the call if it recognizes
the name.
If the phone does not recognize the name, it prompts for
the name again.
If the phone is unable to recognize the name after two
attempts, it prompts “The name cannot be recognized.”
and the following message displays: “Cannot recognize
name. Please check name.” The phone returns
automatically to standby mode, and you can try the call
again later.
Reviewing Voice Dial Entries
To review Voice Dial entries:
1. From the Main Menu press for Voice Dial.
2. Press for Review. A list of your stored voice dial
numbers display, (the names also display if stored in
the Internal Phone Book).
3. Press the associated key to select the desired entry, or
scroll to the desired entry and press . The
recorded name plays audibly. You can scroll through
entries without having to listen to each one, or you can
listen to them all as they play in order.
4. Press to return to the previous screen.