User Manual

Table Of Contents
Getting to Know Your Sprint PCS Phone 25
Getting Started
2
Using the Single Desktop Charger
When you are ready to charge your battery, it is vital that
you use only Sprint PCS-approved desktop chargers and AC
adapter chargers.
1. Plug the single desktop charger’s power cord into a wall
outlet.
2. Insert the phone (with the battery installed) into the
front of the charger.
The LED on the front of the phone indicates the following:
A red light indicates the battery is charging.
A green light indicates the battery is at least 90
percent charged.
A orange light indicates that the battery is operating
at a temperature that is too high or too low, or that
there is a poor connection. Make sure the phone is
resting in the charger.
It generally takes about three hours to fully recharge a
completely rundown battery. With the Sprint PCS-approved
LiIon battery, it is practical to recharge the battery before it
becomes completely run down.
To get the quickest charge for any battery:
Turn the phone off.
Plug the phone with the battery attached into the
travel adapter.
Leaving the phone plugged into the travel adapter
fully charged will not harm the battery.