User Manual

Section 11
84 Changing Your Phone’s Settings
Receiving Data
To receive data with your phone:
1. Make sure that your phone is connected to your
computing device and is powered “on.”
2. From standby mode, press for Main Menu.
3. Press for Wireless Web.
4.
Press for Connection.
5. Select Data/Fax In Incoming Data only and press
. (Notice that the phone displays
“No incoming
voice calls can be received”.
Your phone returns to
standby mode and displays
*DATA ONLY*.)
Returning to Voice Mode
Note:
The phone always powers
up in standby mode, even
if it was powered down in
Data/Fax mode. The
phone also returns to
standby mode if the data
cable is disconnected.
To return to standby mode from Data/Fax mode:
1. Make sure that your phone is connected to your
computing device and is powered “on.”
2. From standby mode, press for Main Menu.
3. Press for Wireless Web.
4.
Press for Connection.
5. Select Data/Fax In Off: Voice Call Only and press
. (Notice that the phone displays “
No incoming
data/fax calls can be received”.
Your phone returns
to standby mode.)