Samsung Photo Printer User’s Guide SPP-2040 Series / SPP-2020 Series
This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to use of this manual. ⓒ 2005 Samsung Electronics Co., Ltd. All rights reserved. SPP-2040 Series, SPP-2020 Series are model name of Samsung Electronics Co., Ltd. SAMSUNG and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system.
Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your printer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the printer. For more information on power cord set requirements, contact your authorized dealer, reseller, or service provider.
CONTENTS Important Safety Information Safety Instructions Power Cord Requirements 1. Getting started Name of each part .......................................................................1.2 SPP-2040 Series Photo Printer..............................................1.2 SPP-2020 Series Photo Printer..............................................1.4 2. Installation Installing the Ribbon cartridge .......................................................2.2 Loading paper .....................................
Deleting the PhotoThru program ....................................................5.9 Selecting your Photo printer as the default printer in Windows .........5.10 Printing from a Windows-based computer......................................5.11 Canceling printing ............................................................ 5.12 Setting up the printer in Windows ................................................ 5.13 Opening the Properties screen............................................ 5.
1. Getting started You can print images with the Samsung SPP-2040 and SPP-2020 Series photo printer directly from your digital camera and memory card without connecting to a computer. This package contains the SPP-2040 or SPP-2020 Series photo printer, accessories, a user's guide and an installation CD. Please check that you have product and accessories after unpacking. This user's guide will explain how to print images and use the photo printer.
Name of each part This user's guide explains how to use the photo printer SPP-2040 and SPP-2020 Series. SPP-2020 Series printer is not equipped with a display panel. SPP-2040 Series Photo Printer Display panel Buttons For accessing and operating functions. Shows printer power-on/off status, images, print status, and error messages. On/Off Memory card slot Turn the printer on or off. You can print images from memory cards. For details, see page 3.2-Inserting memory cards.
Name of each part Ribbon cartridge release level Push upward to remove the existing Ribbon cartridge. Ribbon cartridge install holder Install the Ribbon cartridge. Side cover Open to install the Ribbon cartridge. Rear aperture When printing, the paper moves back and forth through the printer. Copies Shows the number of copies being made of the current image. x3 :4 Total copies Shows the total number of copies to be printed. Image Number 9/9 1.
Name of each part On/Off Turn the printer on or off. To turn the printer off, press and hold for more than 2 seconds. Zoom In Zoom in of the image. Zoom Out Zoom out of the image. Up/Down Select the number of copies you want to print. Left/Right Move to the next image in the menu. OK Change menu settings. Cancel Cancel or stop printing, or cancel menu setting changes. Menu Access menus to use effects and other functions. Print Print images.
Name of each part Color Blue Red State Message On An image is ready to be printed Flickers at 1 second of interval An image is being printed. On Paper jam, paper movement error, print error. Turn the printer off and on. Flickers at 1 second of interval The image to be printed is not of a supported format or there is a JPEG file error. You can do other print jobs without any operation. Flickers at 0.
Name of each part Accessories Power adapter Paper Cassette Ribbon cartridge (for 10 pieces printing) Power cord User’s guide (Memory Card) (Only for SPP-2040 Series) Quick installation guide USB cable Paper (10 pieces) Software program CD The appearance of the power cord may differ depending on the country’s specifications. Depending on your country, the USB cable may not be supplied with your printer. 1.
2. Installation This photo printer prints images by moving the print paper back and forth through the printer. This chapter details the distances that need to be maintained between the printer and surrounding objects, how to turn the printer on and off, and how to load paper. To ensure quick and easy printing, please read this chapter. • Installing the Ribbon cartridge • Loading paper • Connecting the power cord 2.
Installing the Ribbon cartridge Only use Samsung-approved ribbon cartridges, designed for your printer. Ribbon cartridge/photo paper: IPP-4640G The supplied Ribbon cartridge allows you to print 10 pieces of paper. Do not use sharp objects, such as a knife or scissors, to open the ribbon cartridge package. You could damage the surface of the ribbon cartridge. Do not touch the ribbon cartridge film.
Loading paper Loading paper The supported paper size is Postcard(102x152mm/4"x6") size. You should use only paper designed for Samsung Photo Printer. 1 Open the paper cassette. Load the paper shiny side up. Ensure that it is laid flat, and close the cover. Do not load more than 20 sheets of paper. Do not touch the surface of the paper. Only use approved paper: IPP-4640G or IPP-46120G You can not print if the spare portions of the paper has been defaced or cut off.
Connecting the power cord To turn on the printer, you need the power cord and the power adapter. Connect the power adapter to the printer and connect the power cord to the an wall outlet or other power source. 1 2 Connect the end of the power adapter to the power adapter port of the printer. Connect the power cord to the power adapter and connect the cord to the wall outlet or power source. Make sure the power adapter does not block the printer's rear aperture. 3 Press the On/Off button.
3. Printing from memory cards (For SPP-2040 Series only) This printer can print images from seven kinds of memory cards. You can choose specific copy, size and language options without connecting to a computer. • Inserting memory cards • Printing images • Printing multiple images • Printing images using multi-display • Printing enlargements of portions of an image • Setting various effects • Setting additional functions • Printing DPOF files • Removing memory cards 3.
Inserting memory cards This printer can read seven kinds of memory cards. The memory cards support up to 2GB. Do not remove the memory card while the printer is accessing it. (When the memory card indicator is flickering, the printer is reading information) Removing the card while in use may cause damage to the printer, the memory card or the information stored on the card. Insert one memory card only. Do not force a card into the memory card slot as this may cause damage to your printer.
Printing images If you can see images on the display panel, select one and print it. Do not remove the memory card while the printer is accessing it. (When the memory card indicator is flickering, the printer is reading information) Removing the card while in use may cause damage to the printer, the memory card, or the information stored on the card. Insert one memory card only. When a paper jam occurs during printing, do not pull out the jammed paper.
Printing multiple images You can select a group of images and a number of copies to be printed of each, rather than separately selecting the number of copies for each photo. Do not remove the memory card while the printer is accessing it. (When the memory card indicator is flickering, the printer is reading information) Removing the card while in use may cause damage to the printer, the memory card or the information stored on the card. Insert one memory card only.
Printing multiple images 4 Press the Left and Right buttons to select the previous or next image. Copies Follow the step 3. x3 Total copies :4 The total copies of the selected image displays in the upper right corner. 9/9 5 Press the Print button and press it again to start printing. After printing, the number of copies to print reverts to ‘0’ . x3 :4 Print Cancel 3.
Printing images using multidisplay You can select and print multiple images from the display panel. Do not remove the memory card while the printer is accessing it. (When the memory card indicator is flickering, the printer is reading information). Removing the card while in use may cause damage to the printer, the memory card, or the information stored on the card. Insert one memory card only. 1 Insert the memory card. For details about inserting memory cards, see page 3.2-Inserting memory cards.
Printing enlargements of portions of an image You can enlarge and print part of an image. Do not remove the memory card while the printer is accessing it. (When the memory card indicator is flickering, the printer is reading information) Removing the card while in use may cause damage to the printer, the memory card, or the information stored on the card. Insert one memory card only. 1 Insert the memory card. For details about inserting memory cards, see page 3.2-Inserting memory cards.
Printing enlargements of portions of an image 4 Press the Zoom In button until the size you want appears. By pressing the Zoom In button, you can see 1.25x, 1.5x, 1.75x, 2x, 2.25x. 2.5x, 2.75x, 3x enlargement. To zoom out of the image, press the Zoom Out button. 5 Press the Left and Right button to select the portion you want. 6 Press the Print button and press it again to start printing. After printing, the number of copies to print reverts to ‘0’ . x3 :4 Print Cancel 3.
Setting various effects You can select color, clarity, and brightness options for your images. 1 Press the Menu button after selecting an image with the Left and Right buttons. The effect you set is only applied only to those images you have selected. The selected effect is cancelled automatically after printing or turning off the printer. Setting color mode Press the Up and Down buttons to navigate to 'Color Mode.
Setting additional functions You can set up borders for your photos, layout style and paper size. You can also print all of your images at one time or select an alternative language with your photo printer. 1 Press the Menu button twice after selecting the image with the Left and Right buttons. If you press the Menu button once, 'Effect' screen appears and if you press the Menu button again, 'Setting' screen appears.
Setting additional functions Selecting layout Press the Up and Down buttons to navigate to 'Layout.' Press the Left and Right buttons to select 'Off', '2-up', '4-up', '30x40mm', '1.18x1.57in', '20x30mm' '0.79x1.18in', '35x45mm', '1.38x1.77in', '50x70mm' or '1.97x2.76in' Press the OK button to complete the selection. Images printed with the various layout (For example: Paper size-Postcard, Borderless-Off) According to the layout, some portions of the image may not be printed. Off 2-Up 4-Up 30x40mm (1.
Setting additional functions Setting print all function Press the Up and Down buttons to navigate to 'Print All.' Press the Left and Right buttons to select 'No' or 'Yes.' Press the OK button complete the selection. Setting language Press the Up and Down buttons to navigate to 'Language.' Press the Left and Right buttons to select the desired language. Press the OK button to complete the selection. 3.
Printing DPOF files If your camera is compatible with and able to store DPOF files, the Samsung Photo Printer can print them. 1 Insert the memory card with DPOF files. For details about inserting the memory cards, see page 3.2-Inserting memory cards. 2 Press the Print button. Press the Cancel button to print images via the printer regardless of the DPOF file information. Cancel Printing from a [DPOF] file. see page 3.3-Printing images and see page 3.10-Setting additional functions.
Removing memory cards Please do not remove a memory card until the following steps have been taken. Do not remove the memory card while the printer is accessing it. (When the memory card indicator is flickering, the printer is reading information) Removing the card while in use may cause damage to the printer, the memory card or the information stored on the card. Insert one memory card only. If you remove the memory card while printing a job, the printing job will be canceled.
4. Printing directly from your digital camera (For SPP-2020 and SPP-2040 Series) Samsung Photo Printer supports PictBridge. You can print images directly from your digital camera through a USB cable without connecting to a computer. You cannot use a memory card while a digital camera is connected to the printer via a USB cable. 4.
Printing directly from your digital camera You can print images by connecting a PictBridge-compatible device like a digital camera, camera phone, and camcoder to your printer. 1 2 Turn on the printer. Connect your digital camera to the printer with the USB cable supplied with the camera. Digital camera 3 USB port for digital camera Printer Send an order to print images from the PictBridge-compatible device. The manner of printing varies depending on the PictBridge-compatible device.
5. Printing via a computer (For SPP-2020 and SPP-2040 Series) You can print images from programs such as those in the MS Office suite, or any other. With the PhotoThru program included in the CD-ROM, you can print all manner of useful and entertaining images.
Connecting your printer to a Windows-based PC Connect the Photo printer to the PC with the USB cable supplied with your digital camera. You can connect the Photo printer only with the USB cable. 1 Connect the power cable to the printer. If the power cable is connected, press the On/Off button to turn the printer on. For details about the power connection, see page 2.4-Connecting the power cord. If the power cable is already connected, make sure that the printer is turned on.
Installing the program for Windows Install the program on your Windows-based PC after loading paper and connecting cables. You should install the program version that was supplied with the printer. System requirements Before you begin, ensure that your system meets the minimum system requirements.
Installing the program for Windows Installing the program 1 2 3 Quit all programs. Turn on your PC and click 'Cancel' when the 'Found New Hardware Wizard' screen appears. Insert the supplied software program CD(label-side up) into into your CD-ROM drive. The installation window appears. If the installation window does not appear, eject the CD-ROM and insert it again. Or click 'Start' and then 'Run.' Type X:setup.exe, replacing 'X' with the letter of your drive and click OK.
Installing the program for Windows If you select 'Custom,' a screen with the list of all program elements appears. Select the desired features and click 'Next.' If you select 'View User's Guide,' the PDF version of the user's guide will come up. If the Adobe Acrobat program is not installed, it is installed automatically. If you select ‘PhotoThru,’ only the PhotoThru program will be installed. 'Printer' is selected in default and you don't have to select it.
Installing the program for Windows Reinstalling the Program Reinstallation is sometimes necessary if your installation fails or the software does not work properly. 1 2 Select 'Start' → 'Programs' or 'All Programs' → 'Samsung SPP2040 Series' or 'Samsung SPP-2020 Series' → 'Maintenance.' Select 'Repair' when the screen appears. ▲ Windows XP screen If your printer is not connected to a computer, the following window opens. ▲ Windows XP screen After connecting the printer, click 'Next.
Installing the program for Windows 3 Select the components you want to reinstall and click 'Next'. ▲ Windows XP screen If you select ‘Printer,’ the window asking you to print a test page appears. If you choose to print a test page, select the check box and click 'Next.' When the test page prints out correctly, click 'Yes.' 4 Click 'Finish' when the reinstallation is done.
Installing the program for Windows 3 Select the components you want to remove and click 'Next.' ▲ Windows XP screen 4 5 Click 'Yes' when the window asking you to remove the component(s) you selected appears. Click 'Finish' when the uninstallation is done. 5.
Deleting the PhotoThru program PhotoThru is a photo-editing program. If any problems occur after installing the program, delete the program and reinstall it. 1 2 Select 'Start' → 'Programs' or 'All Programs' → 'PhotoThru' → 'Uninstall.' Select 'OK' when the screen for confirming to delete program after the InstallShield Wizard screen appears. ▲ Windows XP screen 3 Select 'Finish' when the uninstallation is done. ▲ Windows XP screen 5.
Selecting your Photo printer as the default printer in Windows When one or more printers are connected to a computer, or many printers are shared on a network, you can select one printer as the default printer. When you print a file from an application, it is printed on the selected printer. If you install the printer driver, the printer is automatically selected as the default printer. 1 2 3 Select 'Start' → 'Settings' → 'Printer'.
Printing from a Windowsbased computer You can print images from an application on a Windows-based PC. Print order may vary depending on the program in use. For details about print order, see the program user's guide. To print from a Macintosh, see page 5.26-Printing from a Macintosh. 1 2 Open the application and then the file you want to print. Select 'Print' in 'File' menu. The print screen appears. Check if the printer name is selected as 'Samsung SPP-2040 Series' or 'Samsung SPP-2020 Series.
Printing from a Windows-based computer Canceling printing You can cancel a print job from the control panel or by accessing the Printer folder. When you press the Cancel button to cancel a printnig job or if a paper jam occurs, one page of the ribbon cartridge’s life is used, even if an image is not completely printed. Canceling from the control panel (Only for Samsung SPP-2040 Series) Press the Cancel button on the control panel.
Setting up the printer in Windows You can use the Samsung SPP-2040 Series printer properties window, which allows you to access all of the printer options you need when using your printer. Opening the Properties screen When the printer properties are displayed, you can review and change whatever settings are needed for your print job. Opening in an application program Print images from the application program. 1 Click 'Properties' from the printer screen.
Setting up the printer in Windows Getting to know the properties screen Basics tab The Basics tab provides options to adjust how the document appears on the printed page. ① ② ③ ④ ▲ Windows XP screen 1 Property Description Borderless Print image with no border. Select the direction in which information is printed on a page. 2 Orientation ▲ Landscape ▲ Portrait 3 Quality If you select Best, the print quality of some colors will be better.
Setting up the printer in Windows Output tab The Output tab provides layout options. ① ② ▲ Windows XP screen Property 1 2 Description Copies Select the number of copies from 1 to 99. Layout options Select the type in which information is printed on a page. The layout appears differently depending on the orientation and the quality that you selected on the Basics tab (see page 5.14-Basics tab) You can select the number of copies, type, pictures per side, and whether to print a border on the page.
Setting up the printer in Windows Graphics tab The Graphics tab allows you to choose various color and contrast options. ① ② ▲ Windows XP screen Property 1 Color Mode Description Select 'Color' or 'Black/White.' You can adjust 'Brightness,' 'Contrast,' 'Saturation' and 'Cyan Red,' 'Magenta-Green,' 'Yellow-Blue.' To adjust color automatically, check 'Auto Adjustment' and click ‘OK.’ 2 Color Adjust ▲ Windows XP screen 5.
Setting up the printer in Windows Deco tab You can use the Deco tab to set options for frames, message and font attributes. ① ② ③ ▲ Windows XP screen Property Description Frame Select a frame. 2 Message You can add a date or a note, or apply a white background to an image. If you want to use white background, select the check box. 3 Font Attributes You can select a name, style, color, and shade for your font.
Setting up the printer in Windows Using a favorite setting The favorites option, available in each tab except for the About tab, allows you to save the current properties settings for future use. ▲ Windows XP screen 1 Select 'Printer Default' or 'Untitled' in 'Favorites.' Printer Default: You can set the current properties as the default setting for the printer driver. Untitled: If you apply new setting, ‘Untitled’ is displayed automatically.
Printing with the PhotoThru program in Windows With the PhotoThru program, you can edit images for more entertaining photos. For details about how to use PhotoThru, refer to the PhotoThru user's guide. 1 2 3 Select 'Start' → 'Program' or 'All programs' → 'PhotoThru' → 'PhotoThru' menu. Locate the image that you want to print when the PhotoThru program appears. Double-click the image you selected. The image is displayed in larger format in the work space and various editing tools appear.
Printing with the PhotoThru program in Windows 4 Click 'File' → 'Print' from the menu bar on the top. 5 Click 'Print' after selecting the number of copies to be printed and any additional function. Make sure that the image direction and the paper direction you set are in the same direction. Use the Preview mode in your application to check the image direction to be printed. 5.
Installing the program for Macintosh System requirements for Macintosh Before you begin, ensure that your system meets the system requirements. Supported Macintosh environment: - Macintosh OS 10.3.X - Processor: Power PC G3, G4, or G5 - Memory: 128MB or more - Free hard disk space: 200MB or more Installing the program 1 2 3 4 5 Quit all programs. Connect the printer to a computer using an appropriate USB cable. See page see page 5.2-Connecting your printer to a Windows-based PC.
Installing the program for Macintosh 6 7 Click 'Continue' when the Samsung Photo Installer screen appears. Select the hard disk the program will be installed and click 'Continue.' 5.
Installing the program for Macintosh 8 9 Select 'Easy Install' as the installation type and click 'Install.' Click 'Quit' when the installation is done. 5.
Setting up the printer in Macintosh Using in MAC OS 10.3.X USB environment 1 Open the hard disk and select 'Applications' → 'Utilities' → 'Printer Setup Utility.' 2 Click 'Add' on the printer list. 3 Select 'USB' tab. 5.
Setting up the printer in Macintosh 4 Select 'SPP-2040 Series' or 'SPP-2020 Series' and click 'Add.' If you fail to search the printer automatically, select 'Samsung' in 'Printer Model.' Select 'SPP-2040 Series' or 'SPP-2020 Series' and click 'Add.' When 'SPP-2040 Series' or 'SPP-2020 Series' is added in the printer list, the setting is finished. 5.
Printing from a Macintosh 1 2 Open the file that you want to print. Click 'Page Setup' after opening the file. 3 Click 'OK' after setting the format, size, orientation and scale. 4 Click 'Print' to print the selected image. 5.
Printing from a Macintosh 5 Click 'Print' after selecting the number of copies and the page range to be printed. On the right side of the tab you can set various option. You can set copies & pages, layout, output options, scheduler, paper handling, colorSync, printer features and summary. 6 The screen confirming that the file was sent to the print queue appears and printing begins. Make sure that the image direction and the paper direction you set are in the same direction.
Printing from a Macintosh Deleting the program 1 2 Click 'Uninstall' after selecting installation type as 'Uninstall' on step 6. See page 5.21-Installing the program for Macintosh. Click 'Quit' when the uninstallation is done. 5.
Printing using PhotoThru program in Macintosh The PhotoThru program is convenient when you modify your image files. It provides various and interesting image editing features. For details about how to use PhotoThru, refer to the PhotoThru user's guide. Installing the program 1 2 3 Turn on your Macintosh and insert the supplied Software program CD(label side up) into your CD-ROM drive. The installation window appears automatically.
Printing using PhotoThru program in Macintosh 3 Double-click the image you selected. The image is displayed in larger format in the work space and various editing tools appear. Edit the image using the available functions. 4 Click 'File' → 'Print' from the menu bar on the top. 5 Click 'Print' after selecting the number of copies to be printed and any additional function. Make sure that the image direction and the paper direction you set are in the same direction.
Using MSC(Mass Storage Class) function(For SPP-2040 Series only) If you connect your printer to a Windows-based computer via a USB cable, and insert a memory card into the printer, the computer recognizes the memory card as a removable disk. The computer then serves the same function as a memory card reader and you can view and edit memory card data. 1 Connect the printer to your computer with an appropriate USB cable and insert a memory card into the printer.
Printing with Bluetooth (Optional: SPP-00BA) If you install the optional Bluetooth device, you can print wirelessly from only a camera phone equipped with Bluetooth. While this product complies with the Bluetooth Specification, it is not guaranteed to work with all devices enabled with Bluetooth wireless technology. Bluetooth compliance: Version 1.
6. Maintenance This printer can be maintained quite easily. It is light and portable. When storing or carrying the printer, remove the paper and the paper cassette. • Maintaining the printer • Replacing the Ribbon cartridge • Troubleshooting • Specifications • Index Close the paper cassette when the printer is not in use. Do not store the printer in direct sunlight or in areas that experience temperature extremes.
Maintaining the printer Cleaning the outside 1 2 Press the On/Off button to turn the printer off and disconnect the power adapter. Clean the outside of the printer using a damp cloth. If you want to use a cleanser, please contact a Samsung service center for a recommended detergent. Do not use other cleansers and soaps as they may cause damage to the print head. 6.
Replacing the Ribbon cartridge Buy the Ribbon cartridge model named IPP-4640G (for 40 pieces printing). 1 Open the side cover. 2 Push the lever upward. Lever 3 Pull the existing cartridge out. 6.
Replacing the Ribbon cartridge 4 After removing the cartridge from its package, rotate the roller to smooth out wrinkles or uneven areas in the film. If the film is not even, it could be damaged during installation. Film Roller 5 6 Insert the cartridge in the direction in the shown illustration. Make sure that the cartridge is under the lever and then close the side cover. Lever 6.
Troubleshooting Error messages on the display Display Problem •Error when there is no paper. •Load the paper. (see page 2.3-Loading paper) •Press the Print button. •Paper jam •Turn the printer off. •If the jammed paper does not come out automatically, remove it manually. •Turn the printer on. •Note that one page of the ribbon cartridge’s life is used when the paper jams occurs even though an image is not printed. •Wrong paper size •Reset the paper size. •Press the Print button.
Troubleshooting Display Problem Troubleshooting •Ribbon Cartridge is empty. •Replace Ribbon cartridge. (see page 6.3-Replacing the Ribbon cartridge) •Ribbon Cartridge is not installed when you turn the printer on. •Install Ribbon cartridge. (see page 2.2-Installing the Ribbon cartridge.) •Press the OK button. •Ribbon Cartridge is not installed when you try to print images. •Install Ribbon cartridge. (see page 2.2-Installing the Ribbon cartridge.) •Press the Print button. •Images were set wrong.
Troubleshooting Display Problem Troubleshooting •There is a problem reading JPEG files. •Print other images. •Cannot print if the image is 40 pixels x 60 pixels or less. •Print images of more then 40 pixels x 60 pixels or more. •Cannot print if the image is 5120 pixels x 7680 pixels or more. •Print images of less than 5120 pixels x 7680 pixels. •Cannot read images. •Turn the printer off and on. •Images in the memory card were deleted. •Try printing images from another source.
Troubleshooting Scheduling printer status checks Your computer can automatically check the status of the printer. 1 2 3 4 Right click on the printer icon at the bottom of the screen and click 'Options' in the menu. Click the checkbox if you want to set the 'Status Monitor Alert Option.' Schedule and automatic status checking from 1 to 10 seconds. Click 'OK' to complete the setting. 6.
Specifications Type of unit a Dye Diffusion Thermal Transfer Print Speed About 60 seconds to print 4x6 inches photo Resolution 300 x 300dpi maximum Input document size Postcard - 102x152mm(4"x6") Capacity of paper cassette up to 20 sheets Sound pressure levelb Printing: Less than 55 dBA Power consumption 40W Operating conditions Temperature: 50℉ to 89℉ (10℃ to 32℃) Humidity: 20% to 80% RH Power source See Rating Label attached on the bottom of the machine Adapter requirements Input : AC 1
Specifications Recycling Please recycle or dispose of packaging materials for this product in an environmentally responsible manner. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Specifications Radio Frequency Emissions FCC Regulations This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: •This device may not cause harmful interference, and •This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Specifications EU Declaration of Conformity (R&TTE) 6.
Index A F About tab 5.17 accessories 1.6 favorite, set 5.18 front view 1.2, 1.4 Basics tab 5.14 borderless, set 5.14 borders, set 3.10 brightness, set 3.9 buttons 1.4 Graphics tab B G H 5.16 help 5.18 I install driver macintosh 5.21 windows 5.4 PhotoThru macintosh 5.29 windows 5.4 C cancel, print 5.12 cartridge install 2.2 replace 6.3 clean 6.2 color adjust, set 5.16 color, set 3.9 L language, set 3.12 layout, set 3.11 load, paper 2.3 D Deco tab 5.17 default printer, set 5.
P R paper jam 6.5 paper, load 2.3 PhotoThru install macintosh 5.29 windows 5.4 print macintosh 5.29 windows 5.19 power cord connect 2.4 print all images 3.12 macintosh 5.26 PictBridge 4.2 windows 5.11 rear view 1.3, 1.5 reinstall, driver, windows 5.6 removable disk S 5.31 sharpness, set 3.9 side view 1.3, 1.5 spool 5.11 system requirements macintosh 5.21 windows 5.3 6.
Rev.1.
