SP-P410M LED Pocket Projector Owner’s Instructions
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 INSTALLATION AND CONNECTION Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual Icon NAME Caution Note MEANING Indicates cases where the function may not work or the setting may be canceled. Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section.
Clean the projector using a soft dry cloth. • Avoid cleaning the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Avoid scratching the screen with your fingernails or a sharp object. This may result in scratches or damage to the product. • Avoid cleaning the product directly by spraying water onto the product. If water enters the product, it may result in fire, electric shock or a problem with the product.
Do not touch. Must be grounded to prevent electric shock. Power Related The following images are for your reference and may differ depending on models and countries. Warning Plug the power plug in firmly. • Otherwise, it may result in fire. Avoid connecting multiple electric appliances to a single wall outlet. • Avoid using a damaged power cord or plug or a loose power outlet. • Otherwise, it may result in electric shock or fire. Avoid plugging in or unplugging the power supply with wet hands.
Installation Related Warning Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire or heater. • Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet. • This may shorten the product life cycle or cause fire. Otherwise, it may result in fire due to internal overheating.
Usage Related Avoid inserting metal objects such as a chopsticks, coins or hairpins, or inflammable objects into the product (the vents, ports, etc). • If water or an alien substance enters the product, turn the power off, unplug the power cord and contact a service center. • Otherwise, it may result in a problem with the product, electric shock or fire. Do not disassemble, or attempt to fix or modify the product. • When the product requires repairs, contact a Service Center.
When cleaning the product, disconnect the power cord and clean the product with a soft dry cloth. When a gas leak occurs, do not touch the product or the power plug and ventilate immediately. • Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing agent when cleaning the product. This may result in the exterior being deformed or the print being removed. • A spark may result in an explosion or fire.
Do not place objects vulnerable to heat near the projector. Be careful to keep your body away from the projector lamp. The lamp is hot. (Children and those who have sensitive skin should be more careful.
1-3 Major Safety Precautions
2 Installation and Connection 2-1 Package Contents •Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the product at a later stage.
To view the picture when installing the projector behind the screen Install a semi-transparent screen. Select Menu > Setup > Install > Rear-Floor To view the picture when installing the projector in the front of the screen Install the projector at the side where you are watching the screen. Select Menu > Setup > Install > Front-Floor 2-2-2 Leveling with Adjustable Feet For level placement of the projector, adjust the Adjustable Feet of the projector.
2-2-3 Zoom and Focus Adjustment Focus the picture on the screen using the Focus Ring. Focus Ring If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection Distance), the focus cannot be adjusted correctly. 2-2-4 Screen Size and Projection Distance Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality.
2-3-1 Connecting with a PC 1. Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. 2. When connections are all completed, connect both power cords of the projector and the PC. 3. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable. This product supports plug and play and therefore, if you use Window XP, you do not need to setup the driver on your PC. Using the Projector 1.
3. Press the [Advanced] button. Another property window will appear. 4. Click on [Monitor] tab and set the by referring to described in the Supported Resolution/Size Modes table. This will set both the vertical and horizontal frequencies. 5. Click the [OK] button to close the window, and click the [OK] button of the window to close the window. The computer may restart automatically. 6. Shut down the PC and connect to the projector.
2-3-3 Supported Display Modes RESOLUTION HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) CLOCK FREQUENCY(MH Z) POLARITY IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 350 37.861 85.080 31.500 +/- VESA, 640 x 400 37.861 85.080 31.500 +/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.
2-4 Connecting the Power Rear of Projector 1. Connect the adapter to the power port. 2. Connect the power cord to the adapter and connect it to a wall outlet. 3. When the power is connected, the screen turns on automatically. Do not look at the lens while connecting the power. Use only an Samsung authorized adapter. 2-5 Connecting an A/V device with an audio/video cable 1. Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of the video equipment using a video cable.
2-6 Connecting an A/V device with a Component/D-Sub Cable 1. Connect [PC IN] input port on the rear of the projector to the COMPONENT port of AV equipment using a D-Sub/Component cable(Not supplied). 2. Connect audio cable(Not supplied) to the audio input port on the rear of the projector. 2-7 Connecting a USB Device 1. Connect your USB device to the USB port at the back of the projector to play videos, photos, and music. Available file system: FAT, FAT32(NTFS is not supported.
Locking the product 1. Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking direction. 2. Connect the Kensington Lock cable. 3. Tie the Kensington lock cable to a desk or heavy object. You can purchase the locking device from an electronics store or an online shop.
2-8 Installation and Connection
3 Using 3-1 Product Features • High Mobility Design • Small Size. • Lightweight. • Play videos, photos, music using a USB device. • Next Generation Backlight Light Source, LED Lamp • Effective energy saving by using low voltage. • Semi-permanent long lifetime guaranteed.
NAME DESCRIPTION 1.Indicators - TEMP (Red LED) - STAND BY (Blue LED) Refer to the LED Indications. 2. Lens cover - 3-1. Adjustable Feet You can adjust the screen position by moving the adjustable feet up and down. 3-2. Tripod holes - 4. Lens - 5. Focus Ring Used for Focus Adjustment. 6. Move / Select Volume button / / : Use this button to move to or select an item within a menu. : Use this button to adjust the volume. 7. MENU Button Used to display Menu Screen. 8.
3-3 Remote Control 1. POWER Button ( ) Use this button for turning the product on and off. 2. SOURCE Button Used to check or select the connection status of external devices. 3. MENU Button ( ) Used to display Menu Screen. 4. Move ( )/ ( ) Button Used to move to or select each menu item. 5. V. KEYSTONE Button ( ) Use this when the screen is displayed in a trapezoid shape. 6. REWIND button ( ) Rewind the movie in the Media.P mode. 7. PAGE DN button ( ) Use to select the previous file. 8.
3-4 LED Indications LED Indications :Light is On STAND BY :Light is Blinking :Light is Off TEMP INFORMATION This state occurs when power is supplied to the projector normally after the POWER button on the projector or the remote control has been pressed. • This state appears when the projector is preparing an operation after the POWER button on the projector or the remote control has been pressed.
MENU SUB-MENU Input Source List Edit Name Picture Mode Size Position Film Mode PC Zoom Install V-Keystone Background Menu Option Information Setup Digital NR Black Level Test Pattern Factory Default Video Type Language Option 3-5-1. Input MENU Source List DESCRIPTION You can select a device connected to the projector to display. • Edit Name
MENU Mode DESCRIPTION Select a screen state which is customized to your projector or change the screen mode as required. • • : Select this mode for a brighter and sharper picture than Standard Mode. • : This is the picture mode optimized to the standard broadcast signal. • : Optimize the picture for watching movies. • : Optimize the picture for presentatations. You can only set in [PC] mode. • : Optimize the picture for watching sports.
MENU Position DESCRIPTION Adjust the screen position if it is not aligned. You can only set a position in mode. Digital NR When a dotted line is displayed or the screen shakes, you can view the picture with better visual quality by enabling Noise Reduction. Black Level If the picture seems too bright, you can set a darker black level. Black level is automatically set in the input mode. You can make the manual settings shown below only when a component signal is supplied.
MENU Install V-Keystone DESCRIPTION To tailor the picture to the installation location, you can invert the projected images vertically/horizontally. • : Normal Image • : Horizontal/Vertical Reversed Image • : Horizontally Reversed Image • : Vertically Reversed Image If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone function.
MENU Language DESCRIPTION You can select the language used for the menu screen. The selected language is applied to both main OSD and MEDIA PLAY menus. Menu Option • : You can move Menu Position up/down/left/right. • : You can set the translucency of menu. • < High>--- • : You can set the display time of the menu.
3-5 Using
4 Media Play Function 4-1 Precautions on using a USB storage device •This product does not support multi-card readers. •This product does not work if the USB storage device is connected by USB HUB. •Some products which do not comply with standard USB specifications might not operate normally. •A USB storage device with automatic recognition application or its own driver might not operate normally. •A USB storage device that uses only a designated driver might not be recognized.
4-2 Photo When selecting thumbnails, You can view image files stored in a USB device. * Press the MEDIA.P button to display the menu for the selected item. MENU DESCRIPTION Play Photo Start Slideshow. Play Mode • : Plays all available image files. • : Plays all image files in a selected folder. • : Randomly plays all available image files in a USB storage device.
Slideshow You can set several options while playing images. * Press the MEDIA.P button to display the menu for the selected item. MENU Slideshow Setting DESCRIPTION You can set several options while playing images. • Transition - Sets a pattern for a slide show. • - - - - - •If the picture size is 32x32 or less, effect is disabled. •If you set , you cannot adjust .
4-3 Music Menu displayed when selecting a music list. You can listen to music files stored in a USB device. * Press the MEDIA.P button to display the menu for the selected item. MENU DESCRIPTION Play Music Plays music files. Play Mode • : Plays all available music files. • : Plays all music files in a selected folder. • : Randomly plays all available music files.
MENU Play Mode Repeat(A-B) DESCRIPTION • : Plays all available music files. • : Plays all music files in a selected folder. • : Randomly plays all available music files. • : Randomly plays all music files in a selected folder. • : Plays a selected music file repeatedly. Plays a selected section repeatedly.
Menu displayed when playing a movie You can set several options for playing video with Mediaplay. * Press the MEDIA.P button to display the menu for the selected item. MENU Play Mode Aspect Ratio Caption DESCRIPTION • : Plays all available video files. • : Plays all video files in a selected folder. • : Randomly plays all available video files. • : Randomly plays all video files in a selected folder.
4-5 Settings Configuring settings You can configure settings for Media Play. MENU Auto Play Update/Reset DESCRIPTION Automatically plays when you enter the menu. • - - • : Starts SW Update. • : Resets settings. • : Views model and SW information. USB Displays total capacity and remaining capacity. Remove Safety You can remove the device from the product.
4-6 Supported Files FORMAT MEDIA File Extension CATEGORY REMARKS (MAXIMUM RESOLUTION/BIT RATE ETC.) VIDEO AUDIO .mpg / .dat MPEG-1/2 MPEG Layer 1 / 2 / 3 .vob MPEG-1/2 N/A .avi XviD / 3ivX MPEG layer 1/2/3 4CC : XVID / 3IVX/ DivX MS ISO MPEG4 ADPCM(MS/Intel DVI / uLaw / aLaw) 4CC:M4S2/MP4S Motion JPEG .mov / .mp4 / .3gp / .3g2 PCM / WMA 4CC:MJPG MPEG-4 MPEG Layer 1 / 2 / 3 4CC : MP4V Motion JPEG ADPCM(MS/Intel DVI / uLaw / aLaw) 4CC:MJPG/ jpeg PCM(8-bit / 16-bit) / AMR NB .
FORMAT MEDIA Audio CATEGORY VIDEO PCM REMARKS AUDIO (MAXIMUM RESOLUTION/BIT RATE ETC.) Mono / Stereo, Sample Rate: 8K~48KHz MPEG 1/2 Layer 1/2 Mono / Stereo, Sample Rate : 32 / 44.1 / 48KHz, Bit Rate:32K~448Kbps MPEG 1/2 Layer 3 (MP3) Sample Rate : 8K~48KHz, Bit Rate:8K~320Kbps WMA Mono / Stereo, Sample Rate : 8K~48KHz, Bit Rate:5K~192kbps *At 16M DRAM solution, WMA has limited support. See table below. Sampling Rate: 22.
FORMAT MEDIA Subtitle CATEGORY VIDEO REMARKS AUDIO (MAXIMUM RESOLUTION/BIT RATE ETC.
4-7 WMA Usage Specifications BIT RATE (KBPS) SAMPLE RATE CHANNELS 320 44.1K 2 256 44.1K 2 192 48K 2 44.1K 2 48K 2 44.1K 2 48K 2 44.1K 2 44.1K 1 48K 2 44.1K 2 80 44.1K 2 64 44.1K 2 44.1K 1 32K 2 48** 32K 2 32 22.05K 2 160 128 96 ** : This definition (bit rate/sample rate/channels) might exist in other WMA decoder class as well. In that case, we cannot support it.
4-7 Media Play Function
5 Troubleshooting 5-1 Before Requesting Service Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. Symptoms Installation and Connection Menu and Remote Control Troubleshooting No Power. Check the power cable connections. I want to install my projector on the ceiling. The ceiling installation support is sold separately. Contact your local product distributor.
Symptoms Screen and External Source Cannot see picture images. Troubleshooting Be sure that the power cord of the projector is connected. Be sure that the proper input source is selected. Check that the connectors are properly connected to the ports at the back of the projector. Check the Remote Control batteries. Be sure that the , settings are not at their lower limit. Poor color. Adjust the and . Images are not clear. Adjust the focus.
6 More Information 6-1 Specifications MODEL Panel Size 13.97 mm / 0.6 inches Resolution 800 x 600 (SVGA) Light Source Power SP-P410M LED Power Consumption 53 W Voltage DC 14V 4.5A Dimension (Width x Height x Depth) 147.5 x 66.3 x 145.5 mm / 5.8 x 2.6 x 5.7 inches Weight 950 g / 2.1 lbs Key Features Input signal Brightness 170 ANSI Contrast 1000:1 Screen Size (Diagonal) 20” ~ 80” Projection Range 0.68 - 2.
The DMD Panel used in DLP Projectors consists of several hundred thousand micro mirrors. As with other visual display elements, the DMD Panel may include a few bad pixels. Samsung and the DMD Panel manufacturer have a rigid, bad pixel identification and limitation procedure in place and products will not exceed the maximum number of bad pixels set by our standards. Rarely, non-displayable pixels may exist, however it does not affect the picture quality nor the lifespan of the product.
6-2 Contact SAMSUNG WORLDWIDE •If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com/mx LATIN AMERICA ARGENTINA 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.com/br 4004-0000 CHILE 800-SAMSUNG(726-7864) http://www.
EUROPE ITALIA 800-SAMSUNG(726-7864) http://www.samsung.com/it LUXEMBURG 02 261 03 710 http://www.samsung.com/lu NETHERLANDS 0900 - SAMSUNG (0900-7267864) (€ 0.10/ Min) http://www.samsung.com/nl NORWAY 3 - SAMSUNG (7267864) http://www.samsung.com/no POLAND 0 801 1SAMSUNG (172678) http://www.samsung.com/pl 022 - 607 - 93 - 33 PORTUGAL 808 20 - SAMSUNG (7267864) http://www.samsung.com/pt SLOVAKIA 0800-SAMSUNG(726-7864) http://www.samsung.
ASIA PACIFIC SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung.com/sg THAILAND 1800-29-3232 http://www.samsung.com/th 02-689-3232 TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 588 889 http://www.samsung.com/vn MIDDLE EAST & AFRICA SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com/za TURKEY 444 77 11 http://www.samsung.com/tr U.A.E 800-SAMSUNG(726-7864) http://www.samsung.
6-3 More Information