DISPLAY ()_,ner s Instructions SPP4231
mportant Regarding ,rml .,n . ' 'm FormatViewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
GeneralInformation Channel Control Your New PlasmaDisplay Panel...................... 6 FineTuningChannels .................................. 64 RemoteControl Buttons.................................. 8 Wall Installation Instructions.......................... 10 Connecting a PCandOperation How to assemblethe Stand-Base .................... Connection a PC ........................................ Connecting Speakers .................................. 15 66 Adjusting the PC Screen .................
GeneralInformation Your New PlasmaDisplay Panel ...................................................... RemoteControl Buttons .................................................................. Wall Installation Instructions.......................................................... How to assemblethe Stand-Base....................................................
YourNew SOURCE/ENTER button Pressto display all of the available video sources ie., TV,AV,S-Video,Component, PC,DVI). Press to confirm a se ection, MENUbutton Displays the main on-screen menu and exit. VOL(+,-) button Press to increase or decrease the volume. Also used to select or adjust items on the on-screen menu. CH(^,v) PowerIndicator - Power Off: Red - Power On: Off - TimerOn : Green RemoteControlSignalReceiver Aim the remotecontrol towards this spot on the PDP.
O DVI INPUT Connect to the video output jack for device with DVI output. 0 MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices IDPC INPUT(RGBIN / AUDIO) Connect to the video and audio output jack on your PC. OFOR SERVICEONLY Connector for service only. 0 S-VIDEO Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR. OAV (VIDEO / L-AUDIO-R ) Video and audio inputs for external devices, such as a camcorder or VCR.
Remote Buttons ® @ @ 0 @ @ 8 ® @
O POWERbutton Turnsthe PDPon and off. 0 S. MODEbutton SelectSound effect. 0 Numberbuttons _) PRE-CN button Tunes to the previous channel. ID + 100button _]) TV/VIDEObutton Press to select channels over 100. For example to select channel 121, press "+100", then press "2" and "1 ." O MUTEbutton Press to display all of the available video sources ie. Video, S-Video, Component, PC, DV . CH(Channel) buttons Use it to switch channels. Press to mute the PDP sound.
in Installation Notes 1 2 Do not install the PDPon any location other than a vertical wall. To protect the performance of the PDP and prevent problems, avoid the following locations: • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration or high voltage. • Do not instal[near or around any heating apparatus. 3 Use only recommended parts and components. Parts (Wall attachment panel issold separately.
Fixing thePDP panel tothe wall attachment panel bracket Remove the screws from the back of the PDP. 2 Connect insulation holders to screws (see the illustration below). • If you are uncertain about installation, hire a specialist to install the wall mount bracket. • Be sure to check that the insulationholders are completely secured on both the left and right side after hanging the PDPon the wall mount bracket. • Be careful to avoid getting your fingers caught during installation.
Put 4 insulation holders the PDP thewall grooves of bracket the wall 101. mount bracket and pull the down on the PDP (0/to onsecure it tointhe mount Tighten the screws as shown (0) so that the PDP cannot be separated from wall mount bracket. PDPpanel Wall Wall attachmentpanel bracket Connecting External Devices tothePDP To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions: Be sure to remove the safety pins underneath the PDP.
How toAdjust Mounting Angle Factorydefault The wall mount bracket is delivered separately. Please tighten the captive screw in the direction of the arrow after assembling the bracket. Changing theangle I Securethe PDPto the wall bracket. (Pleaserefer to themount following instructions.) Setthe angle by pulllng the upper end of the PDPattached to bracket in the direction of the arrow. The angle can be adjusted from 0 ° to 15 ° by_+2 .
Howto Assemble twousing support pins with the stand base and firmly secure both sides of the support pins 8 screws provided. Ill Assemble the PDP with the stand and firmly secure the PDP using 4 screws provided. Twoormorepe0ple shoold carrythePDP. NeverlaythePOP on_hefloorbecouse of possible damage _o_hescreen. AJways s_ore thePOPgpright.
Remove the screws on the rear of the PDP. Hang the two "T" shaped hangers on the square holes on the rear of the PDP. Tighten the PDP and the speaker bracket using the screws removed from the PDP. When moving yourPDP, doNO'[h01d thespeaker connected toy0grPDP. I_maydamage thebracket damping thespeoker andyourPOP togetherand resultina dropofyourPDP anda riskofpersonol damage andiniu_y.
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the "+" and "-" ends of the cable with the diagram on the PDP. Thespeakers MUST hc_ve toapewerhandling capebility of10wu_sminimum (impedance 8_). When youconnect thespeaker wiretotheexterna_ speaker outconnector, firstbindthespeaker wireroundtheferritecuretosecure _. FerriteCores The ferrite cores are used to attenuate undesired signals.
Conn l ons Connecting VHF and UHFAntennas .............................................. 18 Connecting Cable TV.................................................................... Connecting a VCR........................................................................ Connecting a Camcorder .............................................................. Connecting a DVD Player.............................................................. 19 21 22 23 Connecting a DTVReceiver ..............................
'lngVHF UHFAntennas Antennas with 75-ohm Round Leads If your antenna looks like this: 1 it has 75-ohm round leads. Plug the antenna lead into the VHF/UHF terminal on the PDP. Use the Antenna Cobb, an accessory included in the product package.
TV You can connect different cable systems to your PDP, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without aCable Box 1 Plug the incoming cable into the VHF/UHF terminal on the PDP. Use the Antenna Cabte, on accessory included in the product package. Cable with aCable Box that Descrambles AllChannels. Find the on cable connected to This the ANTENNA OUTbe terminal your cable box. terminal might labeled "ANT OUT", "VHF OUT" or simply "OUT".
Cable with aCable Box that Descrambles Some (But Not All) Channels To complete this connection you wi]] need a two-way splitter, an RF (A/B) switch, and four coaxia] cables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". Connect this cable to a two-way splitter.
Connecting aVCR totheVideo orS-Video/Audio jack PDP Power Plug Audio Cable S-Video Cable or Connect the Video/Audio AUDIO/VIDEO cables between the AUDIO(L/R)/VIDEO Video Cable jacks on the PDP and OUT jacks on the VCR. (Note: For better video, you can usean S-Videocable.) VideotapePlayback: 1. Turn on your PDP. 2. Press the TV/VIDEO button to select "Video" or "S-Video". 3. Turn on your VCR, insert a videotape and press the play button.
',nga Viewing camcorder tapes Camcorder PDP Video Cable Audio Cable Connect a Video/Audio VIDEO/AUDIO cable between the AUDIO(L/R)/VIDEO jacks on the PDPand the OUTPUT jacks on the camcorder. ViewingTapes 1. Turn on your PDP. 2. Press the TV/VIDFO button to select "Video". 3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder Owner's instructions.) 22 4. Set the IN/OUT switch on your camcorder to OUT. 5.
nga DVD ayer(480i,480p) This PDP displays the optimum picture in 720p mode. Playing DVD PDP DVD Player Video Cable Audio Cable 1 Connect a Video Cable between the Y, Pb P, (COMPONENT) Y/PB/PRoutput jacks on the DVD player. 2 Connect a Audio Cable between the AUDIO input jacks on the PDPand L/R(COMPONENT) input jacks on the PDPand the AUDIO OUT jacks on the DVD player. To Play DVD: 1. Turn on your PDP. 2. Press the TV/VIDEO button to select "COMPONENT". 3.
nga DWReceiver (480p,720p,1080i) This PDPdisplays the optimum picture in 720p mode. Watching DTV PDP DTV Receiver Video Cable Audio Cable or DVI Cable Use a DVI-D connection cable. (sold separately) Connect the cable or antenna to the antenna input jack on the DTV. 2 Connect a Video cable between the Y, P_,P, (COMPONENT) or DVI jack on the PDP and the Y, P_,P_(VIDEO OUTPUT JACKS) on the DTV receiver. 3 Connect an Audio cable between the COMPONENT and the AUDIO OUTPUT jacks on the DTV receiver.
Operation Turningthe PDPOn and Off .......................................................... Plug& Play Feature...................................................................... Memorizing the Channels.............................................................. 26 28 31 Viewing an External Signal Source ................................................
Turning PDP Turning thePDP Onand Off Press the POWER button on the remote control. The PDPwill be turned on and you will be ready to use its features. You can also use the POWER (l/©)button on the front of the PDP.
Displaying StatusInformation Press the INFO button on the remote control. The PDPwill display the Picture mode, Sound mode, MTS, Caption, and Clock.
ay Feature When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. If the television is inthe Standby POWER button on remote mode, control.press the Themessage Plug&Playisdisplayed_ itflickersfe_e littlewhile, andtheetheLanguage menuisautomatically displayed. appropriate •Select or • the button. language by pressing the Themessage Antenna inputcheckisdisplayed.
Select the correct signal source (Air, STD, HRC and IRC), then press the ENTER button. To start the search, press the ENTER button. Thesearch willendaetem_icelty. Channels aresortedendstoredin anorderwhichreflects theirposition in thefrequency range(with lowest firstendhighest last). Whenithasfinished, theClock Setmeeoisdispl0yed. Tostopthesec_rch beforeith0sfinished orretoretoe0rma_ vMwieg, press theMENU button. Press Press the the ENTER _1 or I_ button. button to move to the Hour, Minute, or am/pm.
ay Feature(continued) If you want to reset this feature... Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Presspress the • the or ENTER • button to select 'M'scellaneous", then button. Press the ENTER • or • button. button to select "Plug & Play". For furtherpage.
Memorlzlnl Your PDP can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH/_. and CH v buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Storing Channels inMemory (Automatic Method) 1 First, select the correct signal source (Air, STD, HRC and IRC). See steps on previous page. Press the MENU button. Press the • or • button to select "Channel", then press the ENTER button. Presspress the • the or ENTER • button to select "Auto Program", then button. Quickwaytoaccess thekgtomati_ Chonnel Setting: Justpress the "kUTO PROG." button ontheremote control. Press the ENTER button. The PDPwill begin memorizing all of the available channels.
Adding and Erasing Channels (Manual Method) Use the buttons to directly select the channel that will number be added or erased. Ex) Channel "4" Press ADD/DEL pressing button, then button.theRepeatedly this press buttonthe willENTER alternate between "Add" and "Erase". Press the MENU button to exit. Note * You can view any channel (including an erased channel) by using the number buttons on the remote control.
ToView Memorized Channel (PIP Mode) Press the MENU button. Pressthe theENTER • or •button. button to select "Channel", then press Press the • button. or • button to select "Scan", then press the ENTER Only the memorized channels are chosen. Press the MENU button to stop.
Changing Channels Pressthe CHA or CHv button to change channels. When you press the CHA or CHv button, the PDPchanges channels in sequence. You will see all the channels that the PDPhas memorized. (ThePDPmust have memorized at least three channels.) You will not see channels that were either erased or not memorized. Pressthe numberbuttonsto go directly to a channel.Forexample,to select channel27, press"2" then "7". TheTV will changechannelswhen you pressthe secondnumber.
an Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable). Setting theSignal Source Press the MENU button. Press the ENTER button to select "Input". Press the ENTER button to select "Source List". Press or • button.
Assigning Names toExternal input mode Press the MENU button. Press the ENTER button to select "input". Press the or • button. button to select "Edit Name", then press the •ENTER 3 Press the ENTER button. • Press the • or • button to select external device: VCR, DVD, Cable STB, HD STB, Satellite STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DHR or PC. Set other signal sources (AV, S-Video, Component, PC or DVI) using the same method as listed above. Press the MENU button to exit.
Picture Control Customizing the Picture ................................................................ Using Automatic PictureSettings .................................................... Selecting the Color Tone................................................................ 40 41 42 DNle (Digital Natural Image engine) ............................................ Changing the ScreenSize ............................................................ Freezing the Picture....................................
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color, and Tint settings of your PDP. Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press or • button. button to select "Custom", then press the the •ENTER You will also see the items "Contrast", ' Br'ghtness", "Sharpness", "Color" and "Tint". Press the • then or • press button select the item you wish to change, thetoENTER button.
cture Your PDP has automatic picture settings that allow you to adjust the video display easily. Press MENU then button. Press • orbutton. • button to select the "P'cture', press the the ENTER Quickway|oacce_thepicture setting: Justpress the"RMODE" bgtt0nontheremotecontrol Press the ENTER button to select "Mode". 3 Press the • or • button to select "Dynamic", "Standard", "Movie", or "Custom" picture setting. • You can select "Entertain", "lnternet', "Text", or "Custom" in PC/DVI mode.
ng Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press or • button. button to select "Color Tone", then press the the •ENTER 3 Press the • or • button to select "Cool2", "Cool1 ", "Normal", "Warm1" or "Warm2". • You can select "Custom", "Cool", Normal" or "Warm" in PC mode. • You can select "Cool", "Normal" or "Warm" in DVI mode. Press the MENU button to exit.
DNle Natura Image Samsung's New Technology brings you more detailed images with contrast, white enhancement and 3D noise reduction. Press MENU then button. Press • orbutton. • button to select the "P'cture', press the the ENTER Press the • button. or • button to select "DNle", the ENTER then press Press the • or • button to select "On", "Off" or "Oemo". oOn : Switches on the DNle mode. "Off: Switches off the DNle mode.
Screen size selection depends on the type of video input ( DVD, PC etc.). Quick waytoaccess the Screen Size menu:Just press the"P. SIZE" huron ontheremote control Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the • button. or • button to select "S'ze', then press the ENTER Press the • press or • the button to select the screen size you want, then ENTER button. Press the MENU button to exit.
16:9(Wide) I INk I I_r_ 16:9 Aspect Ratiothat fits DVD and Wide Screen applications. II Panorama Fitsa 16:9 picture onto a 4:3 screenand displays it without clipping the image. II Zoom Magnifies the 16:9 wide picture (in a vertical direction) to fit the screen size. Select _ by pressing the • or • button. Use the • or • button to move the picture up and down. After selecting I_}, use the • or • button to magnify or reduce the picture size in a vertical direction.
Freezing Still Press the STILLbutton on the remote control to freeze a moving picture. Press again to cancel.
ewmg cture Selecting thePIP Screen Press the MENU button. Press the • or • button to select "P'cture', then press the ENTER button. Press the or • button. button to select "PIP", then press the •ENTER Press the ENTERbuff,on, then press the • or • button to select On . The PIP image will appear in the corner of the screen. " Pressing the • or • button will alternate between "On" and "Off". Ne.te " Check if the V-Chip Lock (refer to page 90) is ON if the RP On/Off will not function.
Selecting anExternal Signal You can use PIPto view a signal from an external source, such as a VCR. Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the • button. or • button to select "PIP", then press the ENTER Press or • button. button to select "Source", then press the the •ENTER 4 Press the • or • button to cycle through all of the available signal sources: "TV", "AV", "S-V'deo', "Component", "PC" and "DVI'.
Swapping theContents ofthePIP Image and Main Image Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the • button. or • button to select "PIP", then press the ENTER 3 Press the • or • button to select "Swap", then press the ENTER button. • The image in the PIPwindow will appear on the main screen, and vice versa. Press the MENU button to exit.
Changing theSize ofthePIP Window Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the • button. or • button to select "PIP", then press the ENTER the Press ENTER the • button. or • button to select 'S'ze", then press Presspress the • the or ENTER • button to select option you want, then button. Press the MENU button to exit.
Changing theLocation ofthePIP Image Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the • button. or • button to select "PIP", then press the ENTER Press or • button. button to select "Position", then press the the •ENTER Press the or • the button to select RP position you want, then• press ENTER button. Press the MENU button to exit.
Cable)a or If the PIPsource is TV while PIP is ON, you can select the broadcasting source of PIP picture separately from the main picture. Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the ENTER the • button. or • button to select "PIP", then press Press the the ENTER • or • button. button to select "Air/CAW", press then If an antenna is connected, setting "Air".
Changing thePIP Channel Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the • button. or • button to select "PIP", then press the ENTER Press or • button. button to select "Channel", then press the the •ENTER Press the in • the or •PIPwindow. button to change the channel that appears Press the MENU button to exit.
SoundControl Customizing the Sound ................................................................ 56 Using Automatic Sound Settings .................................................... 57 Choosing a Multi-Channel Sound (MTSjSoundtrack.......................... 58 Using the Auto Volume.................................................................. 59 Setting the TruSurroundXT ............................................................ 60 Selecting the Internal Mute .............................
m,zmg Press the MF:NU then button. Press • orbutton. • button to select "Sound", press the the ENTER Press or • button. button to select "Custom", then press the the •ENTER Select the option (volume,the balance, to be adjusted by pressing • or • equalizer) button. Press the • or • button to reach the required setting. Press the MF:NU button to exit. _fyoumakeenychanges t0theequalizer settings, thesound Mode iso_ometica_ly switched tothecustom mode.
Press MENU then button. Press • orbutton. • button to select the "Sound", press the the ENTER Press the ENTER button to select "Mode". Press the or • button to select "Standard", "Mus'c ', •"Mov'e", "Speech" or "Custom" sound setting, then press the ENTER button. Press the MENU button to exit.
Depending on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) Press the MENU then button. Press • orbutton. • button to select "Sound", press the the ENTER Quick waytooccess theMTSmenu: Jus_ press the"MTS" burton on _he_emote control the Press ENTER the • button.
Using theAutoVolume Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. "Auto volume" lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Press MENU then button. Press • orbutton.
ng XT TruSurround XT is a patented SRStechnology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. Press the MENU then button. Press • orbutton. • button to select "Sound", press the the ENTER Press the the •ENTER or • button.
,ng InternaMute The internal speakers can be muted in order to hear sound from external speakers you've connected. Press the MENU then button. Press • orbutton. • button to select "Sound", press the the ENTER Press the • the or ENTER • button to select "internal Mute", then press button. Press the • button. or • button to select "On", then press the ENTER • Pressing the • or • button will alternate between "On" and "Off". Press the MENU button to exit.
Chonnel Control Fine Tuning Channels ....................................................................
,neTun,ng Use fine tuning to manually adjust a particular channel for optimal reception. Press the MENU button. Pressthe theENTER • or •button. button to select "Channel", then press Press or • button. button to select ' F'ne Tune", then press the the •ENTER Press the _1 or • button to adjust the fine tuning. To store fine tuning the TV's press thethe ENTER button.setting (A starinicon(*) willmemory, appear.
Connecting a PCandOperation Connecting a PC.......................................................................... Adjusting the PCScreen................................................................ Changing the Positionof the Image................................................ PictureQuallty Adjustment ............................................................ Information..................................................................................
',nga Connection to a Macintosh computer may require an adapter. PDP Use the DVI-D connection cable. (sold sepa rate_.._ --Orm DVI Cable PC Cable DVI jac_'_,, ............ -(TheactualconfigI _ urationon your PC I may be different, _ dependingon the modeL) -_ Audio Cable -- L _ _,/_" t7 I_ _ I . ._.ii_oo.,._ 1 Connect a PC (15pin) cable between the PC Output jack (or DVI jack) on the PC and the RGB IN(or DVI IN) Input jack (15p D-SUB) on the PDP.
Pin Configuration D-Sub Cable DVI-D Cable (Digital-Only Connector) " 15Pin Signal Cable (based on protruded pin) FinNo. PC IN PCOUT 1 Red (R) Red [R) 2 Green (G) Green(G_ 3 Blue (B) Blue(B) 4 5 Grounding GroundingIDDC) Grounding Grounding(BDC) Fin No. 1 2 Signal Assignment T.M.D.B. DatagT.M.D.S. Data2+ SiQnalAssiQnmenl T.M.D.S. Data3+ +SV Power 6 Red [RJGrounding Red [1_Grounding 3 4 5 6 7 8 9 Green(G)Grounding BlueIB)Grounding Ree_rved Green(G) Grounding 7 DDC Data 19 T,M.D.
How toSet upYour PC Software (Windows only) The Windows display-settings for a typical computer are shown below. However, the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Notes_ Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Resolution (DotX Line} Vertical Frequency(Hz) Horizon_l Frequency(KHz) Vertical Horizontal Polarity Polarity 70.086 31.469 N P 85.080 37.861 N P 640 X 400 85.080 37.861 P N 720 X 400 70.087 85.039 31.469 37.927 P P N N 59.940 31.469 N N 72.809 37.861 N N 75.000 37.
Adjusting theR.G.B Preset: • Pressthe TV/VIDEO button to select "PC". Press MENU then button. Press • orbutton. • button to select the "Picture", press the the ENTER Presspress the • the or ENTER • button to select "Color Control", then button. The "Color Control" is available only when "Color Tone" is set in the custom mode. Press the • then or • press button select button.
e Image After connecting the PDPto yourPC,adjustthe positionof the screenif it is not well-aligned. Preset: • Pressthe TV/VIDEO button to select"PC." Press MENU then button. the • or • button to select the "Setup", pressPress the ENTER button. Press the • button. or • button to select "PC", then press the ENTER Presspress the • the or ENTER • button to select "Pos't'on ', then button. Adjust the position of screen by pressing the • / •/_1 / • button. Press the MENU button to exit.
Picture Automatic Adjustment Preset: • Pressthe TV/VIDEO button to select "PC". Press MENU then button. • or • button to select the "Setup", pressPress the the ENTER button. Press the • button. or • button to select "PC", then press the ENTER Press • or • button select "Auto the Adjustment", then to press the ENTER button. The message "Auto Adjustment in progress" appears on the screen and the picture adjustments are automatically activated. Press the MENU button to exit.
Coarse Adjustment Preset: • Pressthe TV/VIDEO button to select "PC". Press MENUthen button. • or • button to select the "Setup", pressPress the the ENTER button. Press the • button. or • button to select "PC", then press the ENTER Press the • the or ENTER • button to select "image Lock", then press button. Press the ENTER button to select "Coarse". Remove picture noise (vertical stripes) on the screen by pressing the _1 or I_ button.
Fine Tuning (Fine) Preset: • Pressthe TV/VIDEO button to select "PC". Press MENU then button. • or • button to select the "Setup", pressPress the the ENTER button. Press the • button. or • button to select "PC", then press the ENTER Presspress the • the or ENTER • button to select "Image Lock", then button. Press the ENTER the • button. or • button to select "F'ne', then press Remove picture noise on the screen by pressing the "4 or • button.
)rm ,n Preset: • Pressthe TV/VIDEO button to select "PC". Press the MENU then button. the • orbutton. • button to select "Setup", pressPress the ENTER Press the • button. or • button to select "PC", then press the ENTER Presspress the • the or ENTER • button to select ", then button. The 'lnformat'on vertical, horizontal frequencies and resolution appear. Press the MENU button to exit.
TimeSetting Setting the Clock ....................................................................... 78 Setting the Sleep Timer............................................................... 79 Settlng the Timers......................................................................
ng Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Press the • button. or • button to select 'T'me", then press the ENTER Press the •ENTER or • button buttontoto select select"Clock". correct hour. Press to select "Minute.", then press the the I_ • button or • button to select correct minute. Press then of press the • the or •I_ button button to to select select "am/pm.", the proper time day (am or pm). Press the MENU button to exit.
ng You can set your PDPto automatically turn off after a preset interval. Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Qgickway't0access thesleep timersetting: Justpress the"SLEEP" b_ton ontheremote control Press the • button. or • button to select "Time", then press the ENTER Presspress the • the or ENTER • button to select "Sleep Timer", then button. Press the • stay or •on.
ng ,mers This PDPcan be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP's clock, as described previously. Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Press the • button. or • button to select "Time", then press the ENTER Press the the •ENTER or • button. button to select "On Timer", then press Press the I_ button to select "Hour", then press the • or • button to select correct hour.
Press press the • the or •I_ button button to to select select "Channel", the channel then you want when PDP turns on. I_ button to select "Volume", then •Press or •thebutton to select the volume level youpress wantthe when PDP turns on. Press the • the or •I_ button to select select "On" 'Act'vafon or "Off". ", then press If you want set Off Timer, • or button to select "Offto Timer". Set the press "Off the Timer" just• as you set "On Timer". 0 Press the MENU button to exit.
Function Description Selecting a Menu Language ..................................................... 84 Digital Noise Reduction........................................................... 85 Selecting the Film Mode ........................................................... 86 Setting the Melody Sound ........................................................ 87 Setting the Blue Screen............................................................. 88 Viewing Closed Captions ............................
nga MenuLanguage Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Press the ENTER button to select "Language". Press the • ' Engl'sh", or • button to select or the"Espa_ol". appropriate language "Fran?ais" Press the MENU button to exit.
Noise If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Press or • button. button to select "Digital NR", then press the the •ENTER Presspress the • the or ENTER • button to select "On" or "Off", then button. Press the MENU button to exit.
ng m On: Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality. Off: Switches off the Film mode. Press the MENU then button. Press • orbutton. • button to select "P'cture', press the the ENTER Press the or • button. button to select "Film Mode", then press the •ENTER Presspress the • the or ENTER • button to select "On" or "Off", then button. Press the MENU button to exit. • 86 Film mode is supported in TV, Video, S-Video and Component 480i.
ng You can hear clear melody sound when the television is powered on or off. Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Presspress the • the or ENTER • button to select "Miscellaneous", then button. the Press ENTER the • button. or • button to select "Melody", press Pressthe • or • button to change the setting. (On or Off).
ng If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. Press the • the or ENTER • button to select "Miscellaneous", then press button. Press the ENTER • or • button. button to select "Blue Screen", Press • or • button to change the setting.
Your TV decodes and displays the dosed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign language translations. All VCRs record the closed caption signal from te}evision programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercia_ video tapes provide closed captions as well Check for the closed caption symbol in your television schedule and on the tape's packaging: c_.
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. Note: When the V-chip feature is activated, the PIP and auto channel program features do not function. Setting UpYour Personal IDNumber (PIN) Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button.
How toEnable/Disable theV-Chip Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. 2 Press the • or • button to select "V-Chip", then press the ENTER button. The message "Enter Pin" will appear. Enter your 4digit PIN number. 3 The "V-Chip" screen will appear. To enable the V-Chip feature, press the ENTER button so that the "V-Chip Lock" field is "On". (Pressing the • or • button will alternate between "On" and "Off".) Press the MENU button to exit.
How toSet upRestrictions using the"TV guidelines" First, set up a personal identification number PIN), and enable the V-Chip. (See previous section. Parenta restrictions can be set up using either of two methods: The TV guide ines or the MPAA rating. Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. 2 Press the • or • button to select "V-Chip", then press the ENTER button. The message "Enter PIN" will appear. Enter your 4digit PIN number.
5 At this point, one of the TV-Ratings is selected. Press the ENTER button. Depending on your existing setup, a symbol _ will be selected. (Blank -- Unblocked, _-- Blocked) While "_" is selected, press the • or • button to block the category. To select a different TV-Rating, press the • or • button and then repeat the process. Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.
How toSet upRestrictions using the MPAA Ratings: G,PG, PG-13, R,NC-17, X TheMPAA rating systemusesthe Motion PictureAssociationof America (MPAA)system,and its main application is for movies.When the V-Chiplock ison, the TVwill automaticallyblock any programs that are coded with objectionable ratings (eitherMPAA or TV-Ratings). Press the MENUthen button. the • or • button to select "Setup", pressPress the ENTER button. 2 Press the • or • button to select "V.Chip', then press the ENTER button.
How toReset the TV after the V-Chip Blocks aChannel ("Emergency Escape") If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: "This channel is blocked by V-Chip". To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions depending on the rating of the local TV programs the V-Chip might lock out a the channe s.
Appendix TroubJeshootlng............................................................................ Care and Maintenance ................................................................ Specifications ............................................................................
Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money.
With proper care, your PDPwill give you many years of service. Please follow these guidelines to get the maximum performance from your PDP. Identifying Problems • • • • Do not put the PDP near extremely hot, cold, humid or dusty places. Do not put the PDP near appliances that create magnetic fields. Keep the ventilation openings clear. Do not place the PDP on a rough and slanted surface, such as cloth or paper. Liquids • Do not place liquids near or on the PDP.
Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDPoperates as a Class B digital device. (Note: Class B system is for home use.) This PDP has been registered for residential use in terms of EMI. NS42D4 SPP4231 1028 (W) X 86.4 (D)X 632.
Memo 101
Memo 102
Memo 103
1-800-SAMSUNG (1-800-726-7864) Samsung Electronics Service Division America 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, L5N 6R3 Ontario www.samsung.
