User Manual

Please close the refrigerator

door after inserting the water

tank.

• Please confirm whether the

water exit of water supply

device is outside after closing

the door.

Groove for hand-grip

Water level window

Round lid

Water tank

Water supply device

Hand-grip

Method 1.: Please fill the water after lift up the round lid

to the arrow direction to open it.

Method 2.: Please fill the water after holding and lifting

both hand-grips of large lid to open it.

Water supply lever

Please lift up and pull out the water tank.

• Please hold the groove of both hand

grips and pull out the water tank while

lifting it up.

• Please clean the inside of water tank

when using it for the first time.(Refer to

page 21)

(MODELS APPLIED : SR-608EV/648EV/688EV)

Please fill the water tank with water after placing it up on flat surface except for water

supply device.

• Please supply the water up to 2.5l of water level window since water may overflow

when closing the round lid if water is too full.

• It is possible to fill the water with water tank inserted in the refrigerator.

Please press down the water

supply lever with hands after

placing cup on platform for cup.

• Please lay the cup deep inside to the extent the

cup can reach the inner wall slightly.

• If hands were removed from cup, there is no

water supplied.

• Please desert 2~3 cups of water when using the

water dispenser for the

first time after

installation.

• In case of continuous

water drinking, about

10~15 cups of water

are availble.

DA68-60306N (0.1) 5/3/05 8:31 PM Page 21