SR2AJ90✴✴U Series POWERbot user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. English imagine the possibilities Thank you for purchasing a Samsung product. 1_SR2AJ90@@U_EN_00740B-00_USA.
Contents 03 Safety information 08 Installation Accessories 10 Charging Automatic charging / Recharging / Low battery POWERbot 12 Using Turning the power on/off / Start Auto clean mode / Starting Spot clean mode / Recharging / Selecting cleaning modes / Using Energy-saving mode the remote control 15 Using Power/Recharging / Cleaning modes / Suction modes / Additional functions / Direction control 16 Name of each part Top / Bottom / Display panel 17 Cleaning and maintaining Cleaning the dustbin / Clean
Safety information Safety information • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. WARNING WARNING CAUTION/WARNING SYMBOLS USED WARNING caution Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists.
Safety information Important safety instructions When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR POWERbot. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fire, electric shock, or injury: GENERAL • Use only as described in this manual. • Do not operate POWERbot or the adapter / docking station if it has been damaged in any way.
• Do not expose the adapter / docking station to high temperatures or allow moisture or humidity of any kind to come into contact with the adapter / docking station. POWERbot • Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc. • Do not use without a filter in place. When servicing the unit, never put fingers or other objects into the fan chamber in case the unit accidentally turns on. • Do not put any objects into openings.
Safety information WARNING ffDo not use the docking station for anything other than its intended purpose. Power related ffPlease prevent any risk of electric shock or fire. –– Do not damage the power cord. –– Do not pull the power cord too hard or touch the power plug with wet hands. –– Do not use a power source other than 100240 V~ and also do not use a multi outlet to supply power to number of devices at the same time. (Do not leave the cord carelessly on the floor.
CAUTION Before use CAUTION ffInsert the dustbin before using POWERbot. ffBe careful with the followings for proper automatic recharging. –– Always turn on the power of the docking station. –– Install the docking station where POWERbot can easily find. –– Do not leave any object in front of the docking station. ffWhen installing the docking station, do not leave the cord carelessly on the floor since POWERbot may get tangled by it. ffDo not use POWERbot on black colored floors.
Installation The docking station must be plugged in and turned on at all times. Install the docking station in a place without obstacles and danger of falling. Power lamp (Red) t1 u bo m A Abo ut 0. 5m DC-IN Abou t 0.5 m DC-IN 1 Connect the adapter jack to the docking station 2 Connect the power cord to the adapter When using the adapter, the side with the sticker attached must face down. 3 Connect the power plug to the outlet The power indicator lamp (Red) will turn on.
Accessories Remote control Batteries (AAA type) User manual Cleaning brush Power cord Adapter Spare filter (SR2AJ9020U Series) Note ffInstall the docking station in a place where the floor and wall are level. ffIt is best to install the docking station along the grain of wooden floors. ffIf the emergency switch is off, the POWERbot will not charge even if it is docked on the docking station. ffAlways turn on the power of the docking station.
Charging It takes approximately 160 minutes to completely charge the POWERbot when charging it for the first time after purchase. Once charged, the POWERbot can be used for approximately 60 minutes. WARNING • Rated input voltage of this product is 100-240 V~. Charging light turns green during charging. 1 Turn on the emergency switch on the bottom You must turn on the emergency switch to turn on the POWERbot.
Automatic charging When the battery indicator blinks during cleaning, the POWERbot will return to the docking station to charge itself automatically. Recharging You can command the POWERbot to recharge at the docking station while it is in cleaning. Low battery Manually charge the POWERbot by placing it on the docking station.
Using POWERbot You must turn on the emergency switch on the bottom of the unit before using POWERbot. Turning the power on/off Press the 3 seconds button for more than WARNING • When POWERbot is not used for 30 minutes, power will turn off automatically. Starting Auto clean mode Press and release this button. Cleans space dividing until the battery is depleted . ✻✻Stop cleaning: Press and release the button Starting Spot clean mode Press and release this button.
Selecting cleaning modes Cleaning mode How to select Displayed icon Auto clean Spot clean Manual clean ✻✻The movement and direction of the POWERbot is controlled by the remote control. ✻✻When the POWERbot is being charged, you can select the Auto clean mode only. ✻✻If the POWERbot fails to return to the charger, it will be turned into the sleep mode. Then the display panel of the main body will be turned off. Press [Start/Stop] or [Power] button to cancel the sleep mode.
Using Energy-saving mode You may select the Energy-saving mode when you go out for a long time or want to save energy. You can select or cancel the Energy-saving mode only while the POWERbot is docked on the docking station. How to select or cancel Displayed icon Press for 5 sec. ✻✻About 3 seconds later, the previous indicator will appear. ✻✻When the POWERbot is in the Energy-saving mode, the green lamp of the docking station will blink.
Using the remote control 1 Power/Recharging 1 2 1 5 Power Turn POWERbot's power on/off Recharging Select to recharge POWERbot at the docking station while it is cleaning. Start/Stop Select to start or stop cleaning 2 Cleaning modes 4 3 Auto clean Cleans space dividing until the battery is depleted .
Name of each part Top 1 3 2 5 3 6 7 3 4 8 1 4 2 7 3 4 4 5 8 6 9 1. 2. 3. 4. 5. 6. 7. 8. Display panel Dustbin holder Remote control signal receiver Obstacle sensor Dustbin Camera Dustbin handle Bumper sensor Bottom 1. 2. 3. 4. 5. 6. 7. 8. 9. Charge pins Pet brush Pet brush cover Cliff sensor Roller Battery cover Pet brush cover button Driving wheel Emergency switch 5 Display panel 1 3 2 4 5 10 6 7 8 9 12 11 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Cleaning and maintaining You must turn off the emergency switch before cleaning POWERbot. Cleaning the dustbin 1 Remove the dustbin 2 Remove the dustbin cover 3 Remove dust in the dustbin and cyclone unit "Click" 4 Detach the cyclone unit from the dustbin cover, and then wash the dustbin and the filter 5 Reassemble the dustbin 6 Reinsert the dustbin into the main body until it clicks Cleaning the sensors and the camera Lightly wipe with soft cloth. Do not use water or cleaning solutions.
Cleaning the Pet brush 1 Remove the Pet brush cover 4 Reassemble the Pet brush 2 Remove the Pet brush 5 Reassemble the Pet brush cover 3 Clean the Pet brush ON OFF ON OFF Cleaning the Driving wheel 1 Put a soft cloth on the floor and place POWERbot upside-down on the cloth. 2 Use a blunt rod or tweezers to remove foreign matter. ENGLISH-18 1_SR2AJ90@@U_EN_00740B-00_USA.
Notes and cautions Charging In use Note Note ffIf the battery overheats during charging, it may take longer to charge. ffWhen automatic charging is not working, do the following: –– Turn the emergency switch (on the bottom of POWERbot) off and on again. –– Unplug the docking station's power plug and then plug it back on.
Cleaning and maintenance About the battery Note Note ffIf you washed the dustbin and filter with water –– Dustbin: Completely wipe out the water. –– Filter: Completely dry it in the shade before using. ffPurchase a filter at authorized Samsung service centers if you need more filters. ffPurchase batteries at authorized Samsung service centers and check for the genuine part symbol ( ) and model name before purchasing. ffThis battery is exclusively for the Samsung Electronics POWERbot.
Information codes 1 The information codes below appear on the display panel 2 If a code appears, turn off the emergency switch and check the instructions below and take appropriate action Information codes 3 The information code will disappear when you turn on the emergency switch Checklist The POWERbot is caught, stuck, trapped or lifted while moving around. fTurn f off the emergency switch and move the POWERbot to another area. Foreign matter caught in the Pet brush.
Troubleshooting Symptom The POWERbot is not working at all. Checklist fCheck f if the emergency switch is on. fCheck f if all the icons are displayed on the display panel. fCheck f if the POWERbot's battery is depleted. fReplace f the batteries (AAA type) if the remote controller is not working. The POWERbot has stopped during cleaning. fWhen f POWERbot is immobilized by an obstacle such as a cord, threshold etc, pick it up and move it away from the obstacle.
Open Source Announcement The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.
Specifications Classification Mechanical specifications (POWERbot) Power specifications Item Detail information Size (Depth x Height x Length) 15 in x 5.35 in x 14.25 in Weight 9.9 lbs. Sensor Ceiling shape recognition (Visionary mapping plus TM) Button type of POWERbot Touch type Power voltage 100-240 V~, 50 Hz/60 Hz Power consumption 80 W Battery specifications Lithium ion 21.
Memo ENGLISH-25 1_SR2AJ90@@U_EN_00740B-00_USA.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support 1_SR2AJ90@@U_EN_00740B-00_USA.
Série SR2AJ90✴✴U POWERbot Guide d'utilisation ✻ Avant d'utiliser cet appareil, veuillez lire attentivement les instructions. ✻ Utilisation en intérieur uniquement. Français imagine the possibilities Merci d'avoir choisi un produit Samsung. 2_SR2AJ90@@U_CFR_00740B-00_USA.
Table des matières 03 Consignes de sécurité 08 Installation 10 Mise en charge 12 Utilisation du POWERbot 15 Utilisation de la télécommande Accessoires Charge automatique / Recharge / Batterie Faible Mise sous/hors tension / Démarrage du mode Nettoyage automatique / Démarrage du mode Nettoyage localisé / Recharge / Sélection des modes de nettoyage / Utilisation du mode d'économie d'énergie Mise en marche/Recharge / Modes de nettoyage / Modes d'aspiration / Fonctions supplémentaires / Contrôle d
Consignes de sécurité Consignes de sécurité • Avant d'utiliser cet appareil, veuillez lire attentivement ce guide et le conserver pour toute référence ultérieure. • Les instructions d'utilisation suivantes concernent plusieurs modèles; il est donc possible que les caractéristiques de votre aspirateur soient légèrement différentes de celles spécifiées dans ce guide.
Consignes de sécurité Consignes importantes de sécurité Lors de l’utilisation d’un appareil électrique, des précautions de base doivent être prises, notamment : LISEZ TOUTES LES INSTRUCTIONS AVANT D'UTILISER VOTRE POWERbot. Débranchez l’appareil de la prise lorsqu’il n’est pas utilisé ou avant toute opération de maintenance. AVERTISSEMENT : Pour limiter tout risque d’incendie, de choc électrique ou de blessure : GÉNÉRALITÉS • Utilisez cet appareil uniquement tel qu’indiqué dans le présent guide.
• Ne détériorez pas les batteries et ne les faites pas brûler car elles risquent d’exploser à des températures élevées. • N’essayez pas d’ouvrir l'adaptateur / la base. Les réparations doivent être effectuées uniquement par un technicien qualifié du centre d’assistance clientèle. • N’exposez jamais l'adaptateur / la base à des températures élevées et évitez tout contact de l'adaptateur / la base avec l’humidité.
Consignes de sécurité AVERTISSEMENT ff N'utilisez la base que conformément à l'usage auquel il est destiné. Branchement ff Évitez tout risque de choc électrique ou d'incendie. –– N'endommagez pas le cordon d'alimentation. –– Ne tirez pas trop fort sur le cordon d'alimentation et ne touchez jamais la prise d'alimentation avec les mains mouillées. –– N'utilisez pas une source d'alimentation autre que 100-240 V~ et ne branchez jamais simultanément plusieurs appareils électriques sur un même bloc multiprise.
ATTENTION Avant l'utilisation ATTENTION ff Insérez le réservoir de poussière avant d'utiliser le POWERbot. ff Pour garantir le bon déroulement de la charge automatique, prêtez attention aux points cidessous. –– Mettez toujours la base sous tension. –– Installez la base à un endroit que le POWERbot peut facilement trouver. –– N'entreposez aucun objet devant la base.
Installation La base doit toujours être branchée et sous tension. Installez la base à un endroit sans obstacles ni risque de chute. Voyant d'alimentation (rouge) ron nvi 1m E Envir on 0 ,5 m DC-IN Envir on 0, 5m DC-IN 1 Branchez la prise de l'adaptateur à la base 2 Branchez le cordon d'alimentation à l'adaptateur Lorsque vous utilisez l'adaptateur, le côté avec l'autocollant doit être tourné vers le bas. 3 Branchez la fiche à la prise d'alimentation Le témoin lumineux (rouge) s'allume.
Accessoires Télécommande Piles (type AAA) Guide d'utilisation Brosse de nettoyage Cordon d'alimentation Adaptateur Filtre de rechange (Série SR2AJ9020U) Remarque ff Installez la base dans un endroit où le sol et le mur sont parfaitement d'équerre et lisses. ff Il est conseillé d'installer la base dans le sens des lames du parquet. ff Si l'interrupteur d'urgence est désactivé, votre POWERbot ne se rechargera pas, même en étant installé sur la base. ff Mettez toujours la base sous tension.
Mise en charge Comptez environ 160 minutes pour charger entièrement le POWERbot lorsque vous le faites charger pour la première fois après l'achat. Une fois chargé, le POWERbot peut être utilisé pendant environ 60 minutes. AVERTISSEMENT • La tension d'entrée nominale de cet appareil est de 100 à 240 V~. Le voyant de charge s'allume vert pendant que l'appareil est en charge.
Charge automatique Si le voyant du niveau de charge clignote pendant le nettoyage, le POWERbot revient automatiquement de lui-même sur la base. Recharge Vous pouvez ordonner au POWERbot d'aller se recharger sur la base pendant qu'il nettoie. Batterie faible Mettez le POWERbot en charge manuellement en le plaçant sur sa base.
Utilisation du POWERbot Vous devez activer l'interrupteur d'urgence en bas de l'unité avant d'utiliser le POWERbot. Mise sous/hors tension Appuyez sur le bouton de 3 secondes. pendant plus AVERTISSEMENT • Lorsque le POWERbot n'est pas utilisé pendant 30 minutes, il s'éteint automatiquement. Démarrage du mode Nettoyage automatique Appuyez puis relâchez ce bouton. Nettoyez l'espace de séparation jusqu’à épuisement total des piles. ✻✻Arrêt du nettoyage : Appuyez puis relâchez le bouton .
Sélection des modes de nettoyage Mode de nettoyage Comment le sélectionner? Icône affichée Nettoyage automatique Nettoyage localisé Nettoyage manuel ✻✻Le déplacement et la direction du POWERbot sont contrôlés par la télécommande. ✻✻Lorsque le POWERbot est en charge, vous pouvez uniquement sélectionner le mode Nettoyage automatique. ✻✻Si le POWERbot ne parvient pas à revenir à la base, il revient en mode Veille. Ensuite, le panneau d'affichage du cadre s'éteint.
Utilisation du mode d'économie d'énergie Vous pouvez sélectionner le mode d'économie d'énergie lorsque vous vous absentez pendant une longue durée ou que vous souhaitez économiser l'énergie. Vous ne pouvez sélectionner ou annuler le mode d'économie d'énergie que lorsque le POWERbot est installé sur la base. Comment sélectionner ou annuler Icône affichée Appuyez pendant 5 secondes ✻✻Environ 3 secondes plus tard, le voyant précédent apparaît.
Utilisation de la télécommande 1 Mise en marche/Recharge 1 2 1 5 Mise en marche Recharge Départ/Arrêt Mettre sous/hors tension le POWERbot Permet de recharger le POWERbot sur la base pendant qu'il nettoie. Permet de démarrer ou d'arrêter le nettoyage 2 Modes de nettoyage 4 3 Nettoyage automatique Nettoyez l'espace de séparation jusqu’à épuisement total des piles.
Nomenclature des pièces Partie haute 1 3 2 5 3 6 7 3 4 8 1 4 2 7 3 4 4 5 8 6 9 5 1. Panneau d’affichage 2. Support du réservoir à poussière 3. Récepteur du signal de contrôle à distance 4. Capteur d’obstacles 5. Réservoir de poussière 6. Caméra 7. Poignée du réservoir de poussière 8. Capteur antichoc Partie basse 1. Broches de charge 2. Brosse spéciale poils d'animaux 3. Cache de la brosse spéciale poils d'animaux 4. Capteur d’escarpement 5. Roulette 6. Cache des piles 7.
Nettoyage et entretien Vous devez désactiver l'interrupteur d'urgence avant de nettoyer le POWERbot.
Nettoyage de la brosse spéciale poils d'animaux Retirez le cache de la brosse spéciale poils d'animaux 4 Réassemblez la brosse spéciale poils d'animaux 2 Retirez la brosse spéciale poils d'animaux 5 Réinstallez le cache de la brosse spéciale poils d'animaux 3 Nettoyez la brosse spéciale poils d'animaux ON OFF 1 ON OFF Nettoyage de la roue d'entraînement 1 Posez un chiffon doux sur le sol et placez-y le POWERbot retourné.
Remarques et mises en garde ff Le POWERbot ne peut pas aspirer des moutons de poussière, il est donc possible qu'il en reste certains sur le sol après le nettoyage. Mise en charge Remarque –– Veuillez utiliser un autre outil de nettoyage pour les retirer régulièrement. ff Si les piles surchauffent pendant la charge, le temps de charge peut augmenter.
Nettoyage et entretien À propos de la batterie Remarque Remarque ff Si vous avez nettoyé le réservoir de poussière et le filtre avec de l'eau –– Réservoir de poussière : essuyez absolument toute l'eau. –– Filtre : faites-le sécher complètement à l'ombre avant de l'utiliser. ff Achetez un filtre dans les centres de service Samsung agréés si vous avez besoin d'autres filtres.
Codes d'information 1 Les codes d'information cidessous apparaissent sur le panneau d'affichage Codes d'information 2 Si un code apparaît, désactivez l'interrupteur d'urgence, puis vérifiez que les instructions ci-dessous sont suivies et prenez les mesures appropriées le cas échéant 3 Le code d'information disparaît lorsque vous activez l'interrupteur d'urgence Liste de vérification Le POWERbot est bloqué, coincé, entravé ou soulevé pendant son déplacement.
Dépannage Symptôme Le POWERbot ne fonctionne pas du tout. Le POWERbot s'est arrêté pendant le nettoyage. Liste de vérification fVérifiez f que l'interrupteur d'urgence est activé. fVérifiez f que toutes les icônes s'affichent sur le panneau d'affichage. fVérifiez f si la batterie du POWERbot est complètement épuisée. fRemplacez f les piles (de type AAA) si la télécommande ne fonctionne pas. fLorsque f le POWERbot est immobilisé par un obstacle tel qu'un cordon, un seuil, etc.
Annonce de logiciel open source Le logiciel inclus dans cet appareil contient un logiciel open source. Vous pouvez obtenir le code source correspondant pendant une période de trois ans après la sortie de la dernière version de ce produit en adressant un email à l'adresse suivante : oss.request@samsung.com. Il est également possible d'obtenir le code source complet correspondant sur un support physique tel qu'un CD-ROM ; un coût minimal sera requis. L'URL suivante http://opensource.samsung.
Spécifications Classification Spécifications mécaniques (POWERbot) Spécifications relatives à l'alimentation Élément Informations détaillées Taille (profondeur x hauteur x longueur) 15 pouces x 5,35 pouces x 14,25 pouces (378 mm x 135 mm x 362 mm) Poids 9,9 lb (4,5 kg) Capteur Système de reconnaissance du plafond (Visionary mapping plus TM) Type de bouton du POWERbot Type tactile Tension 100-240 V~, 50 Hz/60 Hz Consommation 80 W Caractéristiques de la batterie Lithium-ion 21,6 V/ 84 Wh Typ
Mémo FRANÇAIS-25 2_SR2AJ90@@U_CFR_00740B-00_USA.
Pour toute question ou tout commentaire concernant des produits Samsung, veuillez contacter le centre d'assistance clientèle SAMSUNG. Pays Centre d'assistance clientèle Site Internet CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us/support 2_SR2AJ90@@U_CFR_00740B-00_USA.
Serie SR2AJ90✴✴U POWERbot manual del usuario ✻ Antes de poner en funcionamiento esta unidad, lea atentamente las instrucciones. ✻ Para uso en interiores solamente. Español imagine the possibilities Gracias por adquirir un producto Samsung. 3_SR2AJ90@@U_MES_00740B-00_USA.
Contenido 03 Información sobre seguridad 08 Instalación 10 Carga 12 Uso del POWERbot 15 Uso del control remoto Accesorios Carga automática / Recarga / Batería baja Encendido y apagado / Inicio del modo de limpieza automática / Inicio del modo de limpieza localizada / Recarga / Selección del modo de limpieza / Uso del modo de ahorro de energía Encendido/Recarga / Modos de limpieza / Modos de succión / Funciones adicionales / Control de dirección 16 Nombre de cada pieza Parte superior / Parte
Información sobre seguridad Información sobre seguridad • Antes de poner en funcionamiento la unidad, lea detenidamente este manual y consérvelo para su referencia. • Debido a que las siguientes instrucciones de funcionamiento corresponden a diversos modelos, es posible que las características de su aspiradora difieran ligeramente de las que se describen en este manual.
Información sobre seguridad Instrucciones importantes de seguridad Al utilizar un electrodoméstico deben seguirse unas precauciones básicas, incluidas las siguientes: LEA TODAS LAS INSTRUCCIONES ANTES DE USAR SU POWERbot Desenchúfelo del tomacorriente cuando no lo utilice y antes de realizar el mantenimiento. ADVERTENCIA: para reducir el riesgo de incendio, descargas eléctricas o lesiones: GENERAL • Utilícelo solo como se describe en el manual.
POWERbot • No aspire objetos duros o cortantes, tales como vidrio, clavos, tornillos, monedas, etc. • No lo utilice sin el filtro en su lugar. Durante las tareas de mantenimiento, no ponga los dedos ni otros objetos en la cámara del ventilador ya que la unidad puede ponerse en marcha accidentalmente. • No inserte objetos en las aberturas. No lo utilice si hay aberturas obstruidas; mantenga las aberturas libres de polvo, pelusa, cabellos o cualquier cosa que reduzca el flujo de aire.
Información sobre seguridad ADVERTENCIA ff No salpique ningún líquido sobre la estación de carga. Acerca de la alimentación eléctrica –– Existe el riesgo de que se produzca un incendio o una descarga eléctrica. ff Evite el riesgo de que se produzca una descarga eléctrica o un incendio. –– No dañe el cable de alimentación. –– No jale el cable de alimentación con excesiva fuerza ni toque el enchufe con las manos mojadas.
PRECAUCIÓN Antes de usar PRECAUCIÓN ff Inserte el contenedor de polvo antes de usar el POWERbot. ff Para una recarga automática correcta, preste atención a lo siguiente. –– Encienda siempre la alimentación de la estación de carga. –– Instale la estación de carga donde el POWERbot pueda encontrarlo fácilmente. –– No deje ningún objeto delante de la estación de carga. ff Cuando instale la estación de carga, no deje el cable suelto por el suelo, ya que el POWERbot puede enredarse en él.
Instalación La estación de carga debe estar enchufada y encendida siempre. Instale la estación de carga en un lugar sin obstáculos ni riesgo de caída. Lámpara de alimentación (roja) x. pro 1m A Apro x. 0.5 m DC-IN Aprox . 0.5 m DC-IN 1 Conecte el terminal adaptador a la estación de carga 2 Enchufe el cable de alimentación al adaptador Cuando utilice el adaptador, el lado del adhesivo debe estar hacia abajo.
Accesorios Control remoto Pilas (tipo AAA) Manual del usuario Cepillo de limpieza Cable de alimentación Adaptador Filtro de repuesto (Serie SR2AJ9020U) Nota ff Instale la estación de carga en un lugar donde el suelo y la pared sean regulares. ff En suelos de madera, es preferible instalar la estación de carga a lo largo de la veta. ff Si el interruptor de emergencia está apagado, el POWERbot no cargará aunque esté acoplado a la estación de carga.
Carga El POWERbot tarda aproximadamente 160 minutos en cargarse completamente en la primera carga después de la compra. Una vez cargado, el POWERbot puede utilizarse durante 60 minutos aproximadamente. ADVERTENCIA • El voltaje nominal de alimentación de este producto es de 100-240 V~. La luz de carga pasa a color verde durante la carga. 1 Encienda el interruptor de emergencia de la parte inferior Debe encender el interruptor de emergencia para encender el POWERbot.
Carga automática Cuando el indicador de la batería parpadea durante la limpieza, el POWERbot regresa a la estación de carga para cargarse automáticamente. Recarga Puede ordenar al POWERbot que se recargue automáticamente en la estación de carga mientras está limpiando. Batería baja Cargue manualmente el POWERbot colocándolo en la estación de carga.
Uso del POWERbot Debe encender el interruptor de emergencia en la parte inferior de la unidad antes de usar el POWERbot. Encendido y apagado Presione el botón 3 segundos durante más de ADVERTENCIA • Cuando no se usa el POWERbot durante 30 minutos, la alimentación se apaga automáticamente. Inicio del modo de limpieza automática Pulse y libere este botón. Limpiar el área dividida hasta que se agota la batería.
Selección del modo de limpieza Modo de limpieza Cómo seleccionarlo Ícono mostrado Limpieza automática Limpieza localizada Limpieza manual ✻✻El movimiento y la dirección del POWERbot se controla mediante el control remoto. ✻✻Cuando el POWERbot se está cargando, solo se puede seleccionar el modo de limpieza automática. ✻✻Si el POWERbot no consigue regresar al cargador, se pondrá en el modo de suspensión. Luego el panel del visor del cuerpo principal se apagará.
Uso del modo de ahorro de energía Puede seleccionar el modo de ahorro de energía cuando se ausentará por un largo tiempo o si desea ahorrar energía. Puede seleccionar o cancelar el modo de ahorro de energía solo cuando el POWERbot está acoplado a la estación de carga. Cómo seleccionar o cancelar Ícono mostrado Presione durante 5 segundos. ✻✻Unos 3 segundos más tarde aparece el ícono anterior. ✻✻Cuando el POWERbot está en modo de ahorro de energía, la lámpara verde de la estación de carga parpadea.
Uso del control remoto 1 Encendido/Recarga 1 2 1 5 Encendido Recarga Inicio/Detención Enciende/apaga el POWERbot Seleccione para recargar el POWERbot en la estación de carga durante la limpieza. Seleccione para iniciar o detener la limpieza 2 Modos de limpieza 4 3 Limpieza automática Limpieza localizada Limpiar el área dividida hasta que se agota la batería.
Nombre de cada pieza Parte superior 1 3 2 5 3 6 7 3 4 8 1 4 2 7 3 4 4 5 8 6 9 1. 2. 3. 4. 5. 6. 7. 8. Visor Soporte del contenedor de polvo Receptor de la señal del control remoto Sensor de obstáculos Contenedor de polvo Cámara Tirador del contenedor de polvo Sensor de choques Parte inferior 1. 2. 3. 4. 5. 6. 7. 8. 9.
Limpieza y mantenimiento Debe apagar el interruptor de emergencia antes de limpiar el POWERbot.
Limpieza del cepillo de mascotas 1 Retire la tapa del cepillo de mascotas 4 Vuelva a ensamblar el cepillo de mascotas 2 Retire el cepillo de mascotas 5 Vuelva a ensamblar la tapa del cepillo de mascotas 3 Limpie el cepillo de mascotas ON OFF ON OFF Limpieza de la rueda motriz 1 Ponga un paño suave en el suelo y coloque el POWERbot boca abajo sobre el paño. 2 Use una varilla roma o unas pinzas para eliminar las materias extrañas. ESPAÑOL-18 3_SR2AJ90@@U_MES_00740B-00_USA.
Notas y precauciones ff El POWERbot no puede limpiar totalmente las zonas a las que no puede acceder, como rincones, espacio entre el sofá y la pared, etc. Carga Nota –– Use otro sistema de limpieza para limpiarlos regularmente. ff Si la batería se sobrecalienta durante la carga, puede demorar más en cargarse. ff El POWERbot no puede aspirar acumulaciones de polvo y después de la limpieza pueden quedar restos en el piso.
Limpieza y mantenimiento Acerca de la batería Nota Nota ff Si lavó el contenedor de polvo y el filtro con agua –– Contenedor de polvo: Elimine completamente el agua. –– Filtro: Séquelo totalmente a la sombra antes de usarlo. ff Si necesita más filtros, puede comprarlos en un centro de servicio autorizado de Samsung. ff Compre las baterías en los centros de servicio autorizados de Samsung y verifique el símbolo de pieza original ( ) y el nombre del modelo antes de adquirirlas.
Códigos de información 1 Los códigos de información siguientes aparecen en el visor Códigos de información 2 Si aparece un código, apague inmediatamente el interruptor de emergencia, lea las siguientes instrucciones y efectúe la acción correspondiente 3 El código de información desaparecerá cuando encienda el interruptor de emergencia Lista de verificación El POWERbot ha quedado trabado, atascado o atrapado cuando se desplazaba.
Solución de problemas Síntoma Lista de verificación El POWERbot no funciona en absoluto. fRevise f si el interruptor de emergencia está encendido. fRevise f si en el visor aparecen todos los íconos. fRevise f si la batería del POWERbot está agotada. fReemplace f las pilas (tipo AAA) si el control remoto no funciona. El POWERbot se ha detenido durante el proceso de limpieza. fSi f el POWERbot queda inmovilizado por algún obstáculo como un cable, un umbral, etc., levántelo y sepárelo del obstáculo.
Aviso de licencia de código abierto El software incluido en este producto contiene software de código abierto. Puede obtener el código fuente correspondiente completo por un período de tres años a partir de nuestro último envío de este producto enviando un correo electrónico a: mailto:oss.request@samsung.com. También es posible obtener el código fuente correspondiente completo en un medio físico, tal como un CD-ROM; se exigirá un cargo mínimo. El siguiente URL http://opensource.samsung.
Si tiene alguna pregunta o comentario acerca de productos Samsung, contáctese con el Servicio de Atención al Cliente de SAMSUNG. País Servicio de Atención al Cliente Sitio web CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support DJ68-00740B-00 3_SR2AJ90@@U_MES_00740B-00_USA.