User Manual (Windows 7)
Operating the cleaner _25
Operating the cleaner
03 OPERATING THE CLEANER
INSTALLING THE ROBOTIC VACUUM CLEANER
INSTALLING THE VIRTUAL GUARD
You can conne the robotic vacuum cleaner to
a particular section by using Fence (virtual wall)
mode or clean several sections one by one
using Guard (virtual door) mode.
Button operations
1. Mode lamp operations
- Fence (virtual wall) Mode: The red lamp ashes.
- Guard (virtual door) Mode: The green lamp ashes.
- Off :The lamp is turned off.
2. Setting the mode
- Whenever you press the Mode/Power button, Fence
(virtual wall) mode ➝ Guard (virtual door) mode ➝
Power off is selected in this sequence.
✽
The distance of virtual wall is 2.5m at minimum
and may differ depending on surroundings and
movement status of the robot.
Forming a Fence (virtual wall)
VIRTUAL GUARD creates an invisible barrier that the
robotic vacuum cleaner cannot cross.
E.g. in front of pots, furniture, the front door, and so on.
1. Select Fence (virtual wall) mode using the Mode/
Power button.
- The mode lamp ashes red.
2. Install the VIRTUAL GUARD in front of the area
you want to block access from the robotic
vacuum cleaner.
- Install the VIRTUAL GUARD so that the distance detection sensor can form an
invisible barrier that the robotic vacuum cleaner cannot cross.
A fence (virtual wall) is
formed.
Distance
Sensor
Mode/Power Button
Main Body
Detection Sensor
Mode Lamp
Distance
Detection Sensor