User Manual (XP)
22_ Operating the cleaner
Operating the cleaner
INSTALLING THE ROBOTIC VACUUM CLEANER
CHARGING
2.
Check the charge status of the robotic vacuum
cleaner.
When charging is complete, the battery level indicator and
1. After aligning the charge pins of the main unit with
the charge pin of the charger station, press the main
unit until you hear a “Recharging power” sound from
the charger.
When the product is initially purchased, the battery
is fully discharged, and you must charge the robotic
vacuum cleaner manually.
Power Lamp
Charging Lamp
Power
Lamp
Charging Lamp
NOTE
●
●
● Measures to take when charging is not smooth.
When the robotic vacuum cleaner cannot be automatically charged, check the following:
charge connector on the main unit and the charger with a dry cloth.
● When separating the robotic vacuum cleaner from the charger, it will discharge naturally.
■
When the battery level display flashes
while cleaning, the robotic vacuum
cleaner stops vacuuming and
automatically charges itself at the charger.
■
robotic vacuum cleaner cannot be operated by the remote control or
the buttons on the main unit. In this case, directly carry the robotic
Charge
complete
Charging
charging
<Charge display>
Charging Fully charged
Flash
Flash