User Manual (XP)

30_ Operating the cleaner
Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER
AUTO CLEANING
The robotic vacuum cleaner will move by itself and
automatically clean the house until cleaning is completed
once.
■
If cleaning begins when the robotic vacuum cleaner is docked with
the charger station, the time to return to the charger is decreased
since the robotic vacuum cleaner remembers its original position
while moving.
■
If the battery level becomes too low while cleaning, the robotic
vacuum cleaner will automatically return to the charger station and resume cleaning after

● Do not move the robotic vacuum cleaner when it is cleaning
or press a button while it is cleaning. Otherwise, the robotic
vacuum cleaner judges cleaning to be complete and starts
cleaning again from the beginning.
● When you press the Turbo remote control button, either On

 
the display panel in turns. When On turbo is displayed, you
can clean the floor in Turbo Mode.
● When you press the Edge remote control button, On Edge

 
display panel in turns. When On Edge is displayed, you can
clean the floor in Edge Mode.
● If you select both Turbo Mode and Edge Mode at the same

→

turns.
Cancel the mode.
2
1
Set the mode.
Main unit button
Remote control button Configuration Sequence
▶
1time
CAUTION
About the Resume Cleaning function
● If the robotic vacuum cleaner has evaluated that cleaning is
complete, the resume cleaning function is not performed.
● If you move the robotic vacuum cleaner when it is being
charged or press a button, the robotic vacuum cleaner
judges cleaning to be complete and does not resume
cleaning.
NOTE
Cleaning Complete
Normal Mode
Edge Mode
Turbo Mode