User Manual (XP)
Operating the cleaner _33
Operating the cleaner
03 OPERATING THE CLEANER
USING THE ROBOTIC VACUUM CLEANER
MANUAL CLEANING
You can move the robotic vacuum cleaner to clean a
particular location directly by using the remote control.
■
Move the robotic vacuum cleaner to the location where you want
to perform manual cleaning.
■
You can manually clean using the remote control only.
A backwards function is not supported.
●
When the robotic vacuum cleaner is docked with the
charger station, manual cleaning is not supported.
NOTE
Normal Mode
Edge Mode
Turbo Mode
CAUTION
● When you press the Turbo remote control button, either On
the display panel in turns. When On turbo is displayed, you
can clean the floor in Turbo Mode.
● When you press the Edge remote control button, On Edge
display panel in turns. When On Edge is displayed, you can
clean the floor in Edge Mode.
● If you select both Turbo Mode and Edge Mode at the same
→
turns.
Cancel the mode.
2
1
Set the mode.
Main unit button
Remote control button Configuration Sequence
▶
4time