SRD-830/830D/1610/1610D/1630/1630D SRD-850/850D/1650/1650D SRD-870/870D/1670/1670D 8 Channel/16 Channel DVR User Manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website www.samsungsecurity.
overview Features This DVR (Digital Video Recorder) employs H.264 video encoding for 8 or 16 channels of camera input and G.723 audio encoding for 4 or 16 channels, and supports simultaneous hard disc recording and playback. And also it supports network connectivity, providing remote monitoring from a remote PC by transferring video and audio data.
Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 5) Do not use this apparatus near water. 6) 7) 8) 9) Follow all instructions. ! overview 4) Clean only with dry cloth.
overview Before Start This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices : ~ SAMSUNG retains the copyright on this manual. ~ This manual cannot be copied without SAMSUNG’s prior written approval. ~ We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.
Standards Approvals M ` This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 Package Contents Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit.
overview Contents overview 2 3 4 8 10 13 Features Important Safety Instructions Before Start Part Names and Functions (Front) Part Names and Functions (Rear) Remote Control installation 15 16 16 Checking the installation environment Rack Installation HDD Addition connecting with other device 20 20 21 21 21 22 23 Connecting the Video, Audio, and Monitor Connecting the USB Connecting External SATA HDD Connecting POS Device Connecting the Alarm Input/Output Connecting the RS-485 Device Connecting the
0 73 Search Playback web viewer 74 74 75 77 83 87 97 Introducing Web Viewer Connecting Web Viewer Using Live Viewer Using Search Viewer Viewer Setup About backup viewer 98 SEC Backup Viewer 70 98 appendix 100 ! overview search & play 100 Product Specification (SRD-830/830D/1610/ 1610D/1630/1630D) 103 Product Specification (SRD-850/850D/870/ 870D/1650/1650D/1670/1670D) 106 Product Overview 107 Default Setting 110 Troubleshooting English _
overview Part Names and Functions (Front) 830/850/870 1 ALARM HDD NETWORK 2 BACKUP REC 1 2 3 4 5 6 7 8 9 0 3 4 REC ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU SHR-6 USB RETURN 10 8 1610/1630/1650/1670 7 6 1 ALARM HDD NETWORK 2 BACKUP REC 5 3 4 REC 1 2 3 4 5 6 7 8 ZOOM 9 10 11 12 TELE WIDE VIEW PRESET 13 14 15 16 MODE AUDIO ALRAM MENU FREEZE BACKUP SEARCH SHR-6 USB RETURN 10 8 830D/850D/870D 7 6 1 ALARM
Part Names LED Indicator Functions ALARM : Lights on when an event occurs. HDD : Displays the normal access to HDD. Upon access to HDD, LED repeats on and off. NETWORK : Displays both network connection and data transfer status. BACKUP : Displays when Backup is in progress. ! overview REC : Lights on when recording is in progress. PTZ : Sets PTZ Mode ON/OFF. ZOOM(TELE) : Sets the screen to the x2 digital zoom. Runs the TELE function in the PTZ Mode.
overview Part Names and Functions (Rear) 830/830D 1 2 3 4 5 6 9 10 11 12 13 14 1 2 3 4 5 6 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1610/1610D/1630/1630D 850/850D 1650/1650D 10_ overview
870/870D 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1670/1670D English _11 ! overview 1
overview Part Names AUDIO IN AUDIO OUT VIDEO IN LOOP OUT VIDEO OUT VGA HDMI eSATA 1/2 NETWORK USB RS-485 ALARM Functions Audio input signal port (RCA jack) and port for optional audio extension cable. SRD-1650/1650D/1670/1670D (Audio 5~16CH) SRD-850/850D/870/870D (Audio 5~8CH) Audio Signal Output Port (RCA jack). Composite Video Signal Input Port (BNC type connector). Used to transfer a video signal to other video devices. Composite Video Signal Output Port (BNC type connector).
Remote Control DVR Available after switching to DVR mode by pressing the [DVR] button on the remote control. SEARCH Displays the search menu. Changes the screen mode. POWER Displays the Exit pop up screen. Displays the Backup Menu. OPEN/CLOSE Opens or closes the CD tray. ! overview MODE BACKUP DVR Activates the DVR function. NUMBER [0~+10] Used as the numeric input keys, or displays a single channel.
overview MONITOR Available after switching to Monitor mode by pressing the [MONITOR] button on the remote control. AUTO Selects the screen status automatically. ID RESET Initializes the ID value to 00. P.MODE Selects the screen mode. POWER Turns the monitor power on/off. MONITOR Activates the monitor function. NUMBER [0~9] Changes the system ID. ID Sets the ID. Select 2 digits from 0 ~ 9 while pressing the ID Key. +/– Adjusts the audio volume. MUTE Mutes the audio out.
installation Please be noticed with the followings before you use the product. Do not use the product outdoor. Do not spill water or liquid in the connection part of the product. Do not impose the system to excessive shock or force. Do not pull out the power plug forcefully. Do not disassemble the product on your own. Do not exceed the rated input/output range. Use a certified power cord only. For the product with an input ground, use a grounded power plug.
installation Rack Installation Loosen the screws on both sides (2 screws on each side) and install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides (2 screws on each side). ` Fix the screws not to be loosened by vibrations. HDD Addition You can install additional HDDs. Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage.
If adding HDDs to SRD-830/850/870/1610/1630/1650/1670 1. First, loosen the screws in the left and right sides and remove the cover. Upper Bracket Lower Bracket . Install HDDs (x2) on the lower bracket and fix them with screws. ` Firmly secure the screw so that it can not get loose from such as vibration. . Install HDDs (x3) on the upper bracket and fix them with screws. Upper Bracket Lower Bracket .
installation . When the installation of additional HDDs is done, connect the power cable and connect the HDD signal cables (SATA Cable) to connectors ~ on the main board. ` You can check the HDD map directly on the DVR. Refer to “Storage Device > HDD Map”. (Page 48) ` Note that the order of the HDD data cable is nothing to do with the operation. Just make arrangements of the connectors considering the length of each connector. ` SRD-830/1610/1630 do not support DVD media.
. Install a HDD (x1) on the lower bracket and fix it with screws. . Install HDDs (x3) on the upper bracket and fix them with screws. Upper Bracket Lower Bracket ! installation . When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fix them with the provided screws. . When the installation of additional HDDs is done, connect the power cable and connect the HDD data cables (SATA Cable) to connectors ~ on the main board.
connecting with other device M ` The following figures are based on Model SRD-1670D. Connecting the Video, Audio, and Monitor VIDEO IN VIDEO IN SPOT AC 100-240V~IN AUDIO OUT AUDIO IN VIDEO OUT (composite) VIDEO OUT (VGA) HDMI Connecting the USB 1. There are two USB ports at the front and one at the back of the product. . You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port. .
Connecting External SATA HDD M ` SRD-830/830D/1610/1610D/1630/1630D does not support a port for SATA connection. 1. There are two external SATA ports on the rear side of the product. . If an external SATA HDD is connected to the system, recognition and settings are available in “Menu > Device > Storage Device”. J ` Only one SATA HDD can be connected to an external SATA port. ` Use a cable shorter than 1 m for the external SATA HDD connections. Connecting POS Device 1.
connecting with other device ~ ALARM IN 1 ~ 8 (SRD-830/830D/850/850D/870/870D) : Alarm Input Port ~ ALARM IN 1 ~ 16 (SRD-1610/1610D/1630/1630D/1650/1650D/1670/1670D) : Alarm Input Port ~ ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing. ~ ALARM OUT 1 ~ 4 : Alarm Output Port ALARM OUT ALARM IN ALARM IN Connecting the RS-485 Device Connect the RS-485 device through the back port.
Connecting the Network Connecting to Internet through Ethernet (10/100/1000BaseT) Back Bone Hub/Switcher Hub/Switcher Windows Network Viewer Connecting to the Internet using the router Router xDSL or Cable Modem INTERNET xDSL or Cable Modem External Remote PC DDNS Server (Data Center) English _23 ! connecting with other device INTERNET RJ-45 Ethernet Cable (Direct Cable)
connecting with other device Connecting to Internet through ADSL INTERNET RJ-45 Ethernet Cable (Direct Cable) Phone(ADSL) Line ADSL MODEM Hub/Switcher Windows Network Viewer 24_ connecting with other device
live Getting Started Starting the system ! live 1. Connect the power cable of the DVR to the wall outlet. . Press the Power button on the front panel. . You will see the initialization screen. The initialization process will last about 1 minute in the order of icons appeared. If a new HDD is installed, the initialization process may take a longer time. . The live screen appears with a beep. Shutting Down the System You can shut down the system only if you have logged in to the DVR.
live Login To access a DVR or restricted menu, you should have logged in to the DVR. 1. In live mode, right-click any area of the screen. You will see the context sensitive menu as in the right figure. Scene Mode Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Login . Click . The login dialog appears. You can also see the login dialog to access a desired menu by pressing the [MENU] button on the remote control or the front panel.
Live Screen Configuration Icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. ! live 2010-01-01 00:00:01 CAM 01 Name Current Date, Time Login Information Screen Mode Description Displays the current time and date. When you are logged in, the “LOG ON” icon will be displayed. Displayed if the zoom function is activated. Displayed if you press the Pause button.
live Error Information ~ If you turn on the system in the condition that the internal HDD is not connected or an error occurs, the “HDD FAIL” icon ( ) will be displayed on the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup. ~ If the cooling fan does not work properly or has a problem, the window will appear and the fan error icon ( ) will be displayed on the top left corner.
Menu Scene Mode Refer to “Live Mode”. (Page 31) Audio On/Off Refer to “Audio ON/OFF”. (Page 34) Spot Out Freeze Description Refer to “Spot Out”. (Page 33) Refer to “Freeze”. (Page 34) Record/Stop Stops the alarm output and the event monitoring. Refer to “Event Monitoring”. (Page 35) Starts/stops the standard recording. Play Plays the search result (data). Refer to “Search & Play > Play”. (Page 73) Backup Refer to “Using the DVR > Setting the Backup”.
live View the Launcher Menu You can use the Launcher menu appearing on the bottom of the live screen to access it. 1. In Live mode, right-click to display the context menu and select . . Move the cursor to the bottom and click a desired item in the Launcher menu. M ` If no input is entered for 10 seconds, the menu will disappear. ` The Launcher menu can be accessed only using the mouse. ` SRD-830/830D/850/850D/870/870D do not support the 16-split screen mode.
Live Mode SRD-1610/1610D/1630/1630D/1650/1650D/1670/1670D display Live images from 16 channels in a total of 8 layout of split screens. Switching the screen mode CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH5 CH6 CH1 CH7 CH2 CH8 CH3 CH9 CH5 `CH6 SRD-830/830D/850/850D/870/870D do notCH1 support the 16-split screen mode.
CH5 CH6 CH7 CH8 CH5 CH10 CH6 CH11 CH7 CH12 CH4 CH13 CH8 CH11 CH12 CH5 CH3 CH2 CH3CH10 CH4 CH3 CH4 CH5 CH4 CH5 CH2 CH2 CH2 CH2 CH2 CH9 CH9 CH10 CH14 CH11 CH15 CH12 CH16 CH13 CH3 CH3 CH3CH6 CH6 CH6 CH13 live CH7 CH7 CH7 CH14 CH15 CH16 CH1 CH5 CH5 CH7 Manual Switching CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH1 CH1 CH2 CH3 CH9 CH8 CH1 CH2 CH1 CH2 CH4 CH12 CH3 CH4 CH4 CH3 CH9 CH4 CH4 CH1 CH1 CH1 CH2 CH3 CH4 CH6 CH7 CH8 CH10 CH11 CH12 CH14 CH15 CH16
CH16 Switching to Single Mode CH6 CH9 CH10 CH13 CH14 In a splitCH5mode, select and double-click a desired channel to switch to its Single mode. Press the number corresponding to a desired channel on the front panel or the remote control to switch to its Single mode. CH11 numeric CH12buttons”. (PageCH15 CH16 Refer toCH7“Remote CH8 Control > Using the 13) ` Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.
live Zoom This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. 1. Select in the right-click menu. Press the [ZOOM] button on the front panel or the remote control, or simply click < menu. The zoom box appears. > in the launcher . Use the direction keys, or drag and drop to specify an area to enlarge. . Press the [ENTER] button, or double-click the selected area to enlarge it twice.
Event Monitoring CH3 CH1 H3 CH6 CH1 H6 CH3 CH9 CH10 CH3 CH12 ~ If multiple events occur simultaneously, the screen will switch to a split mode. CH2 - 2~4 events : 4-split mode - 5~9 events : 9-split mode CH4 - 10~16 events : 16-split mode ~ CH4 If theCH13 second eventCH14 occurs within the set time of , the first event will last until the second one is terminated. (Page 52) ` Ex : If you set to 5 seconds, and only one event occurs in CH 1.
using the DVR You can setup the system properties, devices, and options for recording, event, backup and network. System Setup You can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language You can check and setup the current Date/Time and time related properties, as well as the language used for the interface on the screen. Setting the Date/Time/Language Set the Date/Time/Language Using the mouse may help easy setup. 1.
- Time Server : Enter an IP or URL address of the time Date/Time/Language server. Date/Time/Language Holiday - Last Sync Time : Displays the most recent Time Synchronization Setup synchronization time from the selected time server. - Activate as Server : Set to
using the DVR Permission Management You can set permissions of each user over the DVR's specific function and settings. Setting the Administrator You can set and change Administrator’s ID and password. The administrator can use and set all menu items and functions. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Select . A dialog for Admin ID and Password input appears.
Setting the Group You can create a user group, and setup permissions of a user group. You can register a user for each group in . Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. Group Admin User Group Add Setup Delete Rename Group Authority Live View Setup Search Setup ! using the dvr 4. Select . A window for , , , and setup appears.
using the DVR To restrict the user permissions If the admin restricts all permissions of an added group, the users belonging to that group can access only the default minimum menus and can change the user’s own password only. 1. Start the DVR. If all permissions are restricted, only the Login dialog should appear. 2. Log in with a registered user ID. Login ID abc Password OK Cancel 3. Right-click any area on the screen.
Setting the User Users can be added only if a group was created in menu. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 5. Use direction buttons (▲▼_ +) to select from the window. A window for “Add User” appears. You can configure the Network Viewer settings including name, ID, viewer, Select Group and password. Result of the user setup appears in the window.
using the DVR ~ Manual Input of ID : Prompts you to enter the user ID manually for the login process. - Checked ( ) : Encloses the registered user IDs with the [] symbols. Use the virtual keyboard to enter the user ID. Login ID ***** Password 6. When the permission setup is done, press . OK Cancel System Management You can check the system version, update to a newer version, as well as data backup and initialization.
~ Updating the Software 1. Connect a device storing the software to be updated. (It may take about 10 seconds to recognize the device.) ` Upgradeable devices include USB memory, CD/DVD and network device. ` To update the network, the current DVR should have been Settings System Information Software Version System Format Broadcast V1.00h_100315180929 Upgrade NTSC MAC Address Current Version 00:00:F0:54:FF:FF V1.00h_100315180929 New Version V1.
using the DVR Settings You can copy and import the DVR settings by using a storage media. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. System Management Settings System Information Storage Device 4. Select . A window of storage device and load factory default appears.
Event Log Event log shows recorded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Select . Log Information System Log Search Day First Page 6. Set Search Day, Channel and Type and the press . Last Page CH All CHs Type View all No.
using the DVR Setting the Device You can setup Camera, Storage Device, Remote Device, POS Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help easy setup. 1. Press the [MENU] button on the remote control or front panel. Logout 2. Use the left/right button (_ +) to select . Device setting menu is selected. Exit Device 3. Use the up/down buttons (▲▼) to move to , and press [ENTER] button.
~ Progressive : You can set the progressive camera to ON/OFF. J ` If you set it to for the progressive camera, screen flickering will be reduced. ~ Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences. Select a channel and adjust the < (Brightness)>, < (Contrast)>, and < (Color)> of the selected channel. 6. When the camera setup is done, press .
using the DVR Storage Device You can check information on storage devices. Confirming Devices You can check storage devices and their free space, usage as well as status. Devices available are HDD, and USB devices (Memory, HDD, CD/DVD). Refer to “Product Specifications > Backup”. (Page 100) Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Select . Storage Device Device Format HDD Alarm Device No.
Formatting You can format a storage device. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Select . A window for selection of device for formatting appears. Storage Device Format Device HDD Alarm Device Select Used/Total Usage HDD 1 12.28G/499.37G Internal ! using the dvr 5. Use direction buttons (▲▼_ +) to select a device to be formatted. Format OK 6.
using the DVR ~ Duration : Sets the alarm duration for the alarm signal and beep sound. - Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4). - If was selected, a beep will sound. - If was selected, both beep sound and alarm signal through rear side ports will output. M ` status means that the HDD is operating but it has problems that require technical examination. ( ) appears on the Live screen.
~ POS Device Setup : Sets the communication setups for the POS device and DVR. ` It is independent to the Remote Device setup.
using the DVR Monitor You can configure information to be displayed and its format for Spot Out monitor. Setting the Monitor Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Select . Monitor Monitor Spot Out Event Display Mode OFF Display Date Time CH Name Icon 5. Use direction buttons (▲▼_ +) to move to a desired item, and set the value.
Setting the Spot Out You can set the DVR to output information / video apart from the monitor out. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Select .
using the DVR Setting the Recording You can setup scheduled recording, event recording and other recording related settings. Recording Schedule Make your reservation on a date and time to schedule the recording on specified time. Using the mouse may help easy setup. 1. Press the [MENU] button on the remote control or front panel. Logout 2. Use the left/right button (_ +) to select . Record menu is selected. Exit Record 3.
Recording Color Tags Color Function White No Recording Orange Continuous Blue Event Green Both(Cont&Evnt) Description No schedule / event recording Scheduled recording only Event recording only Both scheduled / event recordings ! using the dvr Each press of a selected cell will cycle through --. Event Record Duration You can set the beginning and ending point of a recording on an event. Using the mouse may help easy setup. 3.
using the DVR Setting Event Recording Properties You can set each channel’s resolution, quality and IPS for event recordings. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. REC Quality & Resolution Event Standard Remaining count : FullD1(L) : 90 CH 4. Select . Event recording setup window appears. 5. Use direction buttons (▲▼_ +) to move to a desired item, and select it.
~ Disk End Mode : If selected , recording will continue despite the HDD full while overwriting the oldest. If selected , the recording will stop when the HDD is full. ~ Disk End Beep : If selected , the button is activated. If you check it, the beep will sound on the disk full and the recording stops. ~ Auto Delete : If you check it, Record Period setup is activated. If you setup the auto delete, recorded data only in the configured period are searchable. 5.
using the DVR ~ Alarm : Sets the alarm output method. ` For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 49) ~ Duration : Sets the duration of alarm signal and alarm sound. 5. When the sensor detection setup is done, press .
Video Loss Detection You can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to
using the DVR Backup You can check the backup device and set the backup schedule by channel or by time. The product only supports external HDD of USB memory/DVD and USB/SATA type. (Page 100) Setting the Backup You can backup the desired data to a connected device. Using the mouse may help easy setup. 1. Press the [MENU] button on the remote control or front panel. Logout 2. Use the left/right button (_ +) to select . Backup menu is selected. Exit Backup Backup 3. Press the [ENTER] button.
5. When the backup setup is done, press . ` If no available device is recognized for backup, button is not activated. J ` The application may slow down during the backup. ` You can switch to the menu screen during the backup in operation, but playback of data is not available. ` When a CD/DVD or memory device is used for backup, it is not available to use the full capacity of the media since the system consumes a part of its capacity. will fail.
using the DVR ~ IP, Gateway, Subnet Mask, and DNS - For : You can directly input IP address, Gateway, Subnet Mask and DNS. - For : IP address, Gateway, and Subnet Mask are set automatically. - For : IP address, Gateway, and Subnet Mask are set automatically. ~ User ID, Password : In case you selected ADSL, provide the “User ID” and its “Password”. M Connection Mode Connection Protocol Connection Mode ADSL Bandwidth 600kbps IP 192.168. 1.200 Gateway 192.168.
DDNS You can set the DDNS site for a remote user’s network connection. Using the mouse may help easy setup. 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Use virtual keyboard to enter user inputs. ` Refer to “Using Virtual Keyboard”. (Page 38) DDNS DDNS Site OFF Host Name User Name User Password ******** ! using the dvr ` If selected or , input fields are deactivated. 5. When the DDNS setup is done, press .
using the DVR When a router is used J ` To avoid IP address conflict with the DVR's static IP, check followings : ~ Setting the DVR with a static IP - Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Area Network (LAN) environment. ~ Setting the DVR Network 1. Set the in menu of the connected DVR to . 2.
DDNS Setting DDNS is a short form of Dynamic Domain Naming System. DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www.google.com) to an IP address consisting of numbers (64.233.189.104). DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS server so that the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
using the DVR Mailing Service You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs. M ` If an event occurs with a channel where the camera’s video is set to or the remaining recording count is set to , only the text notification will be sent to the applicable email address. SMTP Setting Sets the SMTP mail server. Using the mouse may help easy setup. 3.
Group Setting You can set the group to whom the e-mail is sent, and specify the permission for each group. You can add recipients for each group in the menu item. The recipient is set separately from the DVR user group. Using the mouse may help easy setup. 3. In the setting window, press the up/down (▲▼) button to move to and press the [ENTER] button. 5. Use direction buttons (▲▼_ +) to move to a desired item and set the value.
using the DVR Controlling a PTZ device The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference. PTZ Device The PTZ device can be activated only if a channel in connection with the PTZ camera is selected. Getting started with PTZ The PTZ camera is available, only if a channel is selected, in the following way : ` Using the button on the remote control or the front panel Scene Mode Select the [PTZ] button on the remote control or the front panel.
~ Focus : Enables you to adjust the focus manually. ~ Auto Pan : The camera automatically runs between the two points that you selected. ~ Scan : The camera moves to the preset points in the specified sequence. If multiple presets are specified, the PTZ camera will automatically move to all of the preset points one at a time. ~ Pattern : Makes the PTZ camera remember and follow the past route.
search & play Search You can perform the search for recorded data by the time or by the search criteria such as an event. You can access the menu directly in Live mode. 1. In Live mode, right-click any area of the screen. The Live menu appears. Scene Mode Spot Out Audio Off 2. Select . Or, press the [SEARCH] button on the remote control or the front panel. Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Logout 3. The Search menu appears.
~ Zoom In : The map enlarges in detail. It will switch in the sequence of 24 hours - 4 hours - 1 hour - 5 minutes. ~ Zoom Out : The map will switch in the reverse order of the detailed mode above. It will switch in the sequence of 5 minutes - 1 hour - 4 hours - 24 hours. M Time Search Go to First 2010-01-01 Go to Last Overlapped Data List1 Zoom In Zoom Out 00:01 All Data CAM 01 CAM 02 CAM 03 2010/01/01 00:01:17 CAM 04 Standard Schedule Motion Sensor V.
search & play POS Search You can search for data in the POS device that is connected to the DVR. You can use the mouse to select the related items. 4. Select in the menu. 5. Use direction buttons (▲▼_ +) to set the search criteria and press the [ENTER] button. ` You can enter specific text to refine your search. ~ Keyword : Use the virtual keyboard to enter a keyword. ~ Search Criteria : - : If selected, search will be performed case-sensitively.
Playback Play You can play data stored in the HDD and backup a desired portion of the data. Using the mouse may help easy setup. 1. In Live mode, click in the right-click menu or < > in the launcher menu, or press the Play button on the remote control or the front panel. Scene Mode Spot Out Freeze Stop Alarm 2. Use the up/down button (▲▼) to select a menu. Record Play ` For data search, refer to .
web viewer Introducing Web Viewer What is Web Viewer? Web Viewer allows remote access to your DVRs. You have access to live video, archived video, PTZ control (if configured), etc. PRODUCT FEATURES ~ Remote access from a standard browser ~ Supports PTZ camera controls ~ Supports 1, 4, 8, 16 camera viewing formats (maximum of 16 cameras in the list). ~ Gets JPEG format images to print and save to “Print or Save JPEG format images”. ~ Record video in AVI format-compatible with popular media players.
Connecting Web Viewer 1. Open your web browser and type the IP address or URL of DVR into the URL address box. M The basic URL of the DVR is as following in case of MAC address : ` 00-00-F0-ab-cd-ef : nabcdef.websamsung.net ! Web Viewer ` 00-16-6c-ab-cd-ef : mabcdef.websamsung.net ` 00-68-36-ab-cd-ef : pabcdef.websamsung.net ` You can also use registered URL which setups up in the Setup menu of your DVR. 2. Set the Admin ID and password same to those of the DVR Admin.
web viewer 6. You may have “Windows Security Alert” that attempts to block this with the Windows Firewall. In that case, click to start Web Viewer. 7. Installation is complete. Now you can see the main screen of Live Viewer.
Using Live Viewer ! Web Viewer The Live Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of , , , . These buttons are used for the screen split and full screen mode. Shows the IP address and model name of the connected DVR. Select or for the OSD time information display setting of the Live Viewer. These buttons are used for sequence and changing the screen channel.
web viewer OSD INFORMATION DISPLAY The channel number, video size, and IP address of the connected DVR are displayed. The current date and time will be displayed according to the selected time information display setting or . Alarm icon appears when alarm is issued. It disappears when pressed the [ALARM] button of the DVR. Motion icon appears when motion is detected. It disappears when pressed the [ALARM] button of the DVR. It displays whether the PTZ controls are active.
CONNECTED DVR This displays the IP address and the status of the connecting DVR. M ` Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is exceeded. ` The number of simultaneous connections are limited to 10. ! Web Viewer Setting the display of the OSD time information Select or for the OSD time information display setting.
web viewer ~ NEXT : When this button is clicked, the next screen appears. In SINGLE MODE, the channel numbers are sequentially switched from 1 to 16. In QUAD MODE, the screens are changed like 1st 4 channels (1~4) 2nd 4 channels (5~8) 3rd 4 channels (9~12) 4th 4 channels (13~16). In NINE MODE, the screens are changed from 9 channels (1~9) to 7 channels (10~16). In SIXTEEN MODE, the screen is refreshed.
~ RECORD : Saves the current image on the screen and saves it as a avi video file. M ` To record it, it is required at least 1GB of available space. ` The default saving path is “C:\Program Files\Samsung\Dvr CHANGING THE LIVE SCREEN CHANNEL ~ Blue numbers : Indicates that the current channel is connected to a camera. ~ Gray numbers : Indicates that the current channel is not connected to any camera. USING PTZ CAMERA Click the direction buttons to control the camera.
web viewer ~ MENU : Appears the camera menu screen. ~ PRESET : Moves the lens direction to a preset direction. 1. If you click a preset, the camera moves to the selected preset's position. 2. You can delete the selected preset or all presets. 3. You can save a new preset number and name. M ` You can save presets up to 20. ~ AUTOPAN : Moves the camera lens direction between 2 points set for the camera. ~ SCAN : Moves the camera lens direction between 2 preset points of the camera.
Using Search Viewer ! Web Viewer The Search Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of , , , . These buttons are used for the screen split and full screen mode. Shows the IP address and model name of the connected DVR. These buttons are used for capture, print, and save the image. This displays a calendar at which you can search the recorded video.
web viewer SPLIT-SCREEN You can change the split mode by clicking each number icon. SINGLE MODE QUAD MODE ~ Click < > button. The screen displays the selected camera connected to the DVR in “SINGLE MODE”. ~ Click < > button. The screen displays the selected camera connected to the DVR in “QUAD MODE”. M ` Only SINGLE and QUAD MODE are available in SEARCH menu. ` If 16 channel DVR is connected, you can select a mode from SINGLE to SIXTEEN MODE.
SAVING THE LIVE SCREEN ON THE PC ~ CAPTURE : Saves the current screen into a BMP or JPEG file. M ` The default saving path is “C:\Program Files\Samsung\Dvr ~ PRINT : Prints the playback screen that is now being displayed. It also prints IP address, time, camera number, and current event state. ~ RECORD : If you select a channel and click this button during playback (only play), the video data is saved in a DVR file. (It is saved in the designated folder on your PC.
web viewer SEARCHING THE RECORDED VIDEO IN THE CALENDAR If the video data has been recorded on a date, the date is distinguished in green. If you click the date, the recorded video information is displayed in the time line. When you click , it is changed to today’s date. SEARCHING THE RECORDED VIDEO IN THE TIMELINE It displays the recorded video data status on the DVR after a date is selected.
CONTROLLING PLAYBACK ! Web Viewer Fast Backward : Reverse-plays faster(2x). Reverse Play : Performs Reverse Play. Play : Performs playback. Fast Forward : Plays faster(2x). Go to First : Moves the beginning time of recorded video in the time line. Step Backward : Performs one step reverseplay by one frame. Stop : Stops playing. Step Forward : Performs one step forward by one frame. Go to Last : Moves the last time of recorded video in the time line.
web viewer ~ Time Synchronization Setup Set the time synchronization. ~ Display Date Format : Set the date type. Time : Select a time format to display on the screen. ~ DST (Daylight Saving Time) DST is displayed an hour ahead of the standard time of the time zone. ~ Language Select a preferred language for the DVR. Holiday You can set specific dates to Holidays according to your preferences. For more information, refer to in the menu.
~ Group Users are classified into groups and the permission can be set according to the group. ` First of all, add a group. ! Web Viewer ~ User You can add, change or remove a user or users. ~ Setup You can set the user permission. System Management For more information, refer to in the menu. (Page 42) ~ System Information You can see information of the current system. Check the software version, broadcast format and MAC address.
web viewer Device You can check a list of devices that are connected to the DVR and configure the necessary settings. Click in the menu screen. For more information, refer to “Setting the Device”. (Page 46) Camera ~ Camera You can configure the settings of the camera that is connected to the DVR. M ` SRD-830/830D/1610/1610D/1630/1630D supports 1~4 channels of sound inputs. ~ PTZ You can configure the settings of the PTZ camera that is connected to the DVR. Set the ID and protocol.
~ HDD Alarm You can set the alarm output channel and the alarm duration for an error. ! Web Viewer Remote Device You can see a list of remote devices including PTZ cameras and system keyboards that are connected to the RS-485 port of the DVR and configure the necessary settings. POS Device You can set the channel, preset and communication port of the POS device that is connected to the DVR. M ` You cannot set to use the POS device remotely.
web viewer ~ Spot Out The registered user can view the event screen for the duration set in if an event occurs from the appropriate channel. M ` The number of Spot Out terminals differs according to the model. ~ Mode You can switch between live mode and play mode. Record For more information, refer to . (Page 54) Recording Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time.
Event Record Duration You can set the start and end times of recording that will be activated if an event occurs. ! Web Viewer REC Quality & Resolution ~ Standard/Event You can set the resolution, frame rate and recording quality for each channel. Record Option You can set the Disk End Mode. Event For more information, refer to . (Page 57) Sensor Detection You can set the sensor operation mode and the synchronized camera as well as the alarm output type and the duration.
web viewer Motion Detection You can set the motion detection mode and the sensitivity as well as the alarm output type and the duration. ~ Motion Region Set the target motion detection area Video Loss Detection You can set the alarm output time if a video loss occurs. Alarm Schedule You can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs.
Network For more information, refer to . (Page 61) Connection A remote user can access the DVR via the network to check the current mode and the IP address. ~ Connection ! Web Viewer You can set the network connection route. ~ Protocol You can configure the protocol related settings. DDNS You can check the DDNS settings. Live Transfer A remote user can set the images of the DVR. ~ Live Transfer A remote user can set the image resolution of the transferred data.
web viewer Mailing Service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. ~ SMTP You can set the server that sends mails and specify if you use the authentication process. ~ Event You can set the event interval and specify which events the server sends mails for. ~ Group You can add a group to receive the mail if an event occurs and set the permission to receive the event mail for each group.
About Click . Displays the model name of connected DVR and the version of Web Viewer.
backup viewer SEC Backup Viewer You can play a file that is backed up in the format of SEC. Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer. If you run the backup file viewer, the backup data file will be automatically played. Recommended System Requirements PCs with a lower specification than the recommended below may not fully support forward/backward and high-speed playback.
Name Audio Description / A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated. You can adjust the volume level from 0 to 100. Screen Printout File Tamper Detection Prints out the current screen. You should have installed the appropriate printer driver before you can print out the screen. / Zoom In/Out Display of storage time range A toggle button. Each time you press this button, it will toggle between activated and deactivated.
appendix Product Specification (SRD-830/830D/1610/1610D/1630/1630D) Item Details Note Operating System Embedded OS Broadcast Format NTSC/PAL System Input Voltage AC 100~240V Power Consumption SRD-830/830D/1610/1610D/1630/1630D : 55W Video In Video Composite 16(8) Channel - 1.
Item Video : H.264 Audio : G.723 Resolution & Quality Resolution CIF(S) 352X240(NTSC) /352X288(PAL) Half D1(M) 704x240(NTSC) /704x288(PAL) Full D1(L) 704x480(NTSC) /704x576(PAL) Spec. (Quality) 240(120)ips(NTSC)/ 200(100)ips(PAL) Level8 (high) ~ Level1 (low) 120(60)ips(NTSC)/ 100(50)ips(PAL) Level8 (high) ~ Level1 (low) 60(30)ips(NTSC)/ 50(25)ips(PAL) Record Mode Frame Rate NTSC : 0.9, 1.9, 3.8, 7.5, 15, 30ips PAL : 0.8, 1.6, 3.1, 6.2, 12.
appendix Item Details Display Mode Play Play Mode Single /4-/9-/13-/16-splits SRD-1610/ 1610D/1630/ 1630D Single /4-/9-/13-splits SRD-830/830D Play, Pause, Stop, 2xDigital Zoom Fast Forward/Fast Reverse - 2x, 4x, 8x,16x, 32x, 64x Backup USB External HDD USB CD/DVD Writer, Internal DVD(SRD-830D/1610D/1630D only) USB Memory USB HDD-MAX 1(USB hub not supported) Network Ethernet : 10/100/1000 BaseT, ADSL(PPPoE), DHCP Serial Communication RS-485 PTZ Device Control Remote Control Device RS-232C P
Product Specification (SRD-850/850D/870/870D/1650/1650D/ 1670/1670D) Item Details Embedded OS Broadcast Format NTSC/PAL System Input Voltage AC 100~230V (PAL) AC 110~220V (NTSC) Power Consumption SRD-1670/1670D : 60W SRD-870/870D : 56W SRD-850/850D/1650/1650D : 55W ! APPENDIX Operating System Note Video In Composite 16(8) Channel - 1.
appendix Item Compression Method Video : H.264 Audio : G.723 Resolution & Quality Resolution CIF(S) 352X240(NTSC) /352X288(PAL) Half D1(M) 704x240(NTSC) /704x288(PAL) Full D1(L) 704x480(NTSC) /704x576(PAL) CIF(S) /Half D1(M) /Full D1(L) Record Spec.
Item Play Resolution CIF(S) 352X240(NTSC) /352X288(PAL) Half D1(M) 704x240(NTSC) /704x288(PAL) Full D1(L) 704x480(NTSC) /704x576(PAL) CIF(S) /Half D1(M) /Full D1(L) Note Specification 480(240)ips(NTSC)/ 400(200)ips(PAL) SRD-1650/D (SRD-850/D) 240(120)ips(NTSC)/ 200(100)ips(PAL) SRD-1650/D (SRD-850/D) 120(60)ips(NTSC)/ 100(50)ips(PAL) SRD-1650/D (SRD-850/D) 480(240)ips(NTSC)/ 400(200)ips(PAL) SRD-1670/D (SRD-870/D) Display Mode Single /4-/9-/13-/16-splits Play Mode Play, Pause, Stop, 2xDigital
appendix Product OVERView ~ SRD-1670D USB 106_ appendix
Default Setting This returns the factory default settings. The settings are made as follows; ~ Use System/Load Factory Default in MENU ` The default settings are based on SRD-1670D.
appendix Category Details Factory Default POS Device OFF Monitor Device Monitor Spot Out Mode Display All Switch to Split Screen 5 sec VGA 800x600 HDMI 480p Spot Out 1 CH1 ~ CH4 Spot Out 2 CH5 ~ CH8 Spot Out 3 CH9 ~ CH12 Spot Out 4 CH13 ~ CH16 Event Display OFF Live Mode ALL Play Mode ALL Recording Schedule Channel 1 Event Record Duration PRE Event OFF POST Event 1 min Normal Recording REC Quality/ Resolution Event Record Option Disk End Mode Event Resolution CIF(S
Category Details Factory Default Connection Mode Connection Connection Mode Network DDNS Live Transfer Bandwidth 2Mbps IP 192.168.1.200 Gateway 192.168.1.1 Subnet Mask 255.255.255.0 DNS 168.126.63.
appendix Troubleshooting Symptom Countermeasures The system does not turn on and the indicator on the front panel does not work at all. Check if the power supply system is properly connected. Check the system for the input voltage from the power source. If the problem persists even after you have taken the above actions, check the power supplier and replace it with a new one if neccessary. Some channels display just a black screen even if they receive video sources.
Countermeasures I've found that the DVR does not recognize as many disks as installed when I have connected multiple external HDDs to the DVR. It takes time for the DVR to recognize multiple external HDDs. Try again in a moment and if the problem (of failure to recognize as many HDDs as connected) persists, it may occur due to a mechanical error of the HDD installed. Try again with a different HDD. A message of “Need to reset date/time.” Is displayed on the screen.
appendix Symptom Countermeasures Recording does not work. If your player does not display a Live image at all, that indicates recording does not work so first check if you see an image on the screen. Recording does not work if the recording settings are not properly configured. 1) Manual Record: Press the [REC] button on the front panel of the DVR or on the remote control to start recording. 2) Scheduled Record: Specify a desired time in Menu – Record Recording Schedule.
Open Source License Report on the Product The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products.
The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.
offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiti
litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's “contributor version”.
and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
the work for the customer’s own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker.
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungsecurity.com www.samsungipolis.com SAMSUNG TECHWIN EUROPE LTD.