User Manual

34_ Setting up your refrigerator
Setting up your refrigerator
How to reverse the door (Option)
Unplug the refrigerator or disconnect the power.
1. Remove 3 screws on the
hinge cover.
2. Disassemble the hinge cover.
3. Disassemble 2 connectors. (a
housing and a reed switch)
4. Disassemble ground wire by
removing 1 screw on each
side.
5. Disassemble the upper hinge
by removing 3 bolts on each
side with the 10 mm wrench.
1) Avoid the wire damage.
2) Fridge door is possible to tip
over at this time.
6. Remove each fridge doors by
lifting it up.
1) Possible to drop or scratch
the door at this time.
2) Middle hinge cap may come
o with the door.
7. Disassemble middle hinge
cap.
Cap
Cover
8. Remove 1 screw and 2 bolts
of each side (use Ø 5 mm
allen wrench).
1) At first, Remove left side
middle hinge and right side.
2) Be careful not to drop the
freezer door.
9. Remove the freezer door by
lifting it up.
1) Possible to drop or scratch
the door at this time.
2) Low hinge cap may come o
with the door.
10. Remove 2 screws.
11. Separate front leg Cover.
NW2-FDR_DA68-01868A-26_EN.indd 34 7/3/2019 4:57:19 PM