User manual

14
Installation
Disassemble Brackets
1. Open box and take out product.
Then separate bottom bracket
with screw(1) in picture.
2. Place ‘bottom bracket’ on even
place and assemble main unit
and bracket with screw(2) in
picture.
3. Assemble rear cover and main
unit with screw(3) in picture.
The cables must be passed
through rear cover hole as
following picture.
4. Tied up installed cables firmly.
Mount product
Use 6 screws as following picture and mount brackets on installation place.
(ST : 15kgf ~)
 ST = screw tightening power
 Tighten screw with recommended torque