User manual

17
Surveillance
Start/End system
Before install on vehicle, user should set system first. Connect VGA or HDMI monitor If monitor
doesn’t display because of resolution, press and hold ‘zoom’ key on remote controller for 5seconds. It
adjust system resolution automatically.
Log in
1. Connect power on system.
2. System displays initial screen and start initializing.
3. It shows login screen.
4. To log in, select ‘admin’ and press ‘OK’. No password is
configured at initial time.
*if there’s configured password, click password field and
use virtual keyboard.(see picture)
5. System logs in as ‘Administrator’.
Note : password can be set up to 8 numbers with combination of
number 0 to 9. Special character (& # < > ` ~) are not allowed. To
enter new password, go to ‘Menu->System->User’ page.
Shutdown system
1. Press ‘Menu’ and select ‘Shutdown’ system
Only allowed user can shut down system.