User manual

22
SYSTEM SETUP
System information
General information setup
1. Press menu and move to SYSTEM->Information.
2. Enter NVR name. (Easy to recognize in multiple
device access)
3. Set ID on ‘Remote Controller’. User can control
multi NVRs with single remote controller with
changing IDs.
4. User can export / Import and set default system
setup. (To export/import, USB memory is
required.)
5. Back to default with ‘Default’ button
* Date&Time, User info., Display Resolution, Language, Network Setup(IP address, DDNS)
will not be initialized.
6. Press ‘OK’ to save changes.
Enter Vehicle information
1. Press Menu and move to ‘SYSTEM-
>Information’.
2. Enter necessary information.
3. Shutdown delay: After ignition off, system waits
for a configured time and safely shuts down
system.
4. Press ‘OK’ to save changes.