User manual

47
Smartviewer AUTO v1.0
Monitoring live view, search and other features on remote place through network.
Start Remote software(S.W should be installed on your PC)
1. Double click remote s.w and run it.
2. It displays main screen.
Minimum resolution: 1024x620.
Recommended resolution: 1280x1024
3. To log in, select user and enter password.
* No initial password is set. Change password for
your security.
Connect NVR from remote software
1. Press Connect icon to display connection list.
2. Press ‘Add’ and NVR information that desired to connect.
 Name : Enter NVR name
 Address : Enter NVR’s IP address
 Port: Default is 10101. If changed, enter changed port.
 Description (Optional): enter comment.
 User : select NVR user account
 Password: enter password for NVR user.
3. Click ‘OK’ to save information and complete the
registration.
4. Press double click NVR list on connection list and ‘Connection’ button.
Note: Auto Detection requires specific service. To use this service, install ‘Apple® Bonjour®’
service on remote PC
Note : Set NVR name when you use multiple systems.