User manual

63
Connector Pin Map
1. Power connector
- VCC/ACC input range is 12Vdc ~ 24Vdc.
- VCC power pin should be connected to battery on vehicle and connect ACC power pin to
accessory power on vehicle.
- ACC. Power means the power on when turn key at ‘ACC’ mode..
-
2. IP camera input connection pin map
No. PoE Power out / Data in
1 TX+, DC+
2 TX-, DC+
3 RX+, DC-
4 Not use
5 Not use
6 RX- DC-
7 Not use
8 Not use
 When connect IP camera, it’s recommended to use ‘FTP’ or higher level of cable to
minimize noises from outside.