User manual

112_ appendix
appendix
DEFAULT SETTING
This returns the factory default settings.
To reset the system, move to “System Management > Settings > Load Factory Default” and press the <Default>
button.
` The default settings are based on SRN-1670D.
` The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
Category Details Factory Default
System
Date/Time/Language Date/Time/Language
Date YYYY-MM-DD
Time 24 hours
Time Zone GMT
Time
Sync. OFF
DST OFF
Language English
Permission
Management
Admin
ID admin
Password 4321
Group
Group None
Group
Authority
User Group All
Setup
Restricted Access
Backup/Record Stop/
Search/PTZ/Remote Alarm
Out/Shutdown
Restriction on Network Access
Auto Log out 3 Min
Manual Input of ID
System Management System Information Device Name NVR
Device
Camera Camera
Video ON
Audio OFF
Camera Name CAM 01 ~ CAM 16
Dwell Time 5 sec
Scan Type
Progressive
Storage Device HDD Alarm
Check Alarm Output Port OFF
Duration OFF
Replace Alarm Output Port OFF
Duration OFF
Remote Device
Remote
Control ON
ID 00
Monitor
Monitor
Event
Display OFF
Display All
Multi CH SEQ Time 5 sec
Video Output VGA(1280x1024)
Display Position Setup 30
Mode Live
Screen ALL