Manualshelf

User manual

ManualsBrandsSamsung ManualsDigital Video Recorders (DVR)SRN-1670D 1TB
51525354555657585960
54_ Menu Setup
Menu Setup
5. If you select <RTSP> for the protocol, check options as necessary.
•
RTSP URL : For more information about the RTSP address, refer to the manual of each applicable network
camera.
•
ID : Enter the ID with which you connect to RTSP.
•
Password : Enter the password for connecting to RTSP protocols.
•
Mode : Select a mode that is supported by the network camera in RTSP connection mode.
-
TCP : The connection type with the network camera will switch to "RTP over TCP".
-
UDP : The connection type with the network camera will switch to "RTP over UDP".
-
HTTP : The connection type with the network camera will switch to "RTP over TCP (HTTP)".
M
` For RTSP connection, up to 5 cameras of 2M or 3M resolution can be supported.
If you want to check the error details of camera registration
If you failed to register a camera, the reason for the failure will be displayed.
•
Connection failed due to unknown error. : This message appears if the camera has failed to be registered
due to unknown connection status.
•
Connected successfully. : This message appears if the camera is connected successfully.
•
Incorrect model information. Provide the correct model information. : This message appears if the
model information provided for registering the camera is incorrect.
•
Authentication has failed : This message appears if the ID or password provided for registering the camera
is incorrect.
•
Connection has failed due to excessive concurrent users. : This message appears if the concurrent user
count exceeds the upper limit.
•
Connection has failed due to incorrect HTTP port information. : This message appears if the HTTP port
number of the camera is invalid.
•
Connection has failed. Unknown connection status. : This message appears if the camera has failed to
be connected due to a unknown error.
•
Custom Model : If you set the camera model to <Standard> when registering it, the system will retrieve the
name directly from the camera. However, if registration has failed, you can enter the camera name manually.