User manual

74_ Menu Setup
Menu Setup
• Port : Sets the communication port.
• Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
• User : Enter a user to use authentication when connecting to the SMTP server.
• Password : Enter the password of the SMTP server user.
• Secure Transfer : Select one from <Never> and <TLS (if available)>.
• Sender : Use the virtual keyboard to enter the sender's e-mail address.
` Refer to "Using Virtual Keyboard". (Page 43)
• TEST : Conducts the test on the server settings.
Event Setting
You can set the interval and type of the event that will be sent to the user.
[
MENU]  ▼  <Network>  ►▼ <Mailing Service>  [ENTER]  ▲▼◄►  <Event> 
▲▼◄►  [ENTER]
• Event Interval : Set the event interval.
` If a series of events occurs, the e-mail will be sent at the specified interval, not on each event.
• Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.