User manual

English _79
● SEARCH & PLAY
PLAYBACK
Play
You can play data stored in the HDD and backup a desired portion of the data.
1. Select <Play> in the context menu of the Live screen, click < > in the launcher menu, or press [►] on
the remote control.
2. Use the up/down button ( ▲▼ ) to select a menu.
` If this is the first time you try to play, you will start with the data search window.
For data search, refer to "Search". (Page 76)
3. Select a data item and click <Play> in the Search menu.
The selected data is played and the play launcher appears on the screen.
` If there is an existing data, <Play> will start immediately without performing the search.
• Playback Information : Displays the date and time of the current data in the top corner.
• Backup : Click < > to set the current time to the start time of backup; you can specify a backup area
using the mouse (yellow triangle).
Click <
> again to set the current time to the end time of the backup and the "Backup Range" window
appears.
- Type : Supports formats of NVR and SEC.
Refer to a list of formats in "Backup". (Page 67)
- Device : Select a backup device.
- Check Capacity : Enables you to check the capacity of the selected storage device.
4.
To return to the Live screen during the playback, click < > in the launcher menu or press [@] on the remote
control.
PTZ Alarm Freeze
2011-01-01
01:10:25
PTZ Alarm Freeze
Scene Mode ►
Camera Profile
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout