User manual

English _85
● WEB VIEWER
Connected NVR
This displays the IP address and the status of the connecting NVR.
M
` Connection failure message
No Response : Appears when the NVR does not respond.
Access Denied : Appears when the maximum number of users is exceeded.
` The number of simultaneous connections are limited to 10.
Audio
Sound On/Off. The audio signal of the selected channel will output.
Setting the display of the OSD time information
Select <NVR Time> or <PC Time> for the OSD time information display
setting.
• NVR Time : Based on the time of the connected NVR.
• PC Time : Based on the time of the PC currently running the Web Viewer.
Changing the Live Screen Mode
` 16-split mode does not support “SEQUENCE”, “PREVIOUS” and “NEXT”.
• SEQUENCE : When this button is clicked, screens are switched at a
preset interval.
In SINGLE MODE, the channel numbers are sequentially switched from
1 to 16.
In QUAD MODE, the screens are changed like 1st 4 channels (1~4)
 2nd 4 channels (5~8)  3rd 4 channels (9~12)  4th 4 channels
(13~16).
In NINE MODE, the screens are changed from 9 channels (1~9) to 7
channels (10~16).
In SIXTEEN MODE, the screen refreshes at the preset interval.
` Preset interval (10 seconds)
• PREVIOUS : When this button is clicked, the previous screen appears.
In SINGLE MODE, the channel numbers are switched in reverse order.
In QUAD MODE, the screens are changed like 1st 4 channels (1~4)  2nd 4 channels (13~16)  3rd 4
channels (9~12)  4th 4 channels (5~8). In NINE MODE, the screens are changed from 9 channels (1~9) to
7 channels (10~16).
In SIXTEEN MODE, the screen is refreshed.