User Manual

4
Slide the server fully into the rack cabinet until
it locks in place. Using the handles on the
free end of the cable management arm, retract
the spring-loaded hinge pins ; then, rotate
the handles to lock the pins in the retracted
position.
Slide the tab on the cable management
arm into the slot in the hinge plate; then,
release the hinge pins into the holes in the
plate.
Attach cables to the rear of the server (such
as keyboard, mouse, and monitor cables if
required). Route the cables toward the left
side of the server. Use cable clamps to
secure cables along the way. Insert clamps
only in the column of ventilation holes
immediately to the right of the ac power
connectors. If you insert the clamps in
columns elsewhere, they will interfere with the
removal of internal components.
Route the cables through the
cable-management arm, securing them with
cable straps . Use two cable straps
(one on each side of the hinge) to secure the
power cords to the hinge plate.
See the documentation that comes with your
server and optional devices for complete
cabling instructions.
3