SU-4340 SERIES Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register DJ68-00294R(0.0).indd 1 2011.4.
Contents IMPORTANT SAFETY INSTRUCTIONS·············································································· 3 Identifications of parts···························································································· 4 Attaching the Handle································································································· 4 Attaching the Hose and Tools················································································ 5 Operation·································
IMPORTANT SAFETY INSTRUCTIONS Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING: To reduce the risk of fire, electric shock, or injury : • Do not leave vacuum cleaner unattended when it is plugged in. • Unplug from outlet when not in use and before servicing. • Do not use outdoors or on wet surfaces.
Assembling Parts Identifications of parts The assembled cleaner will look like the illustration to the left. 1-1 Front Back 1. Handle 2. Power switch 3. Quick release cord hook 4. Post-Motor Filter 5. Crevice tool 6. Handle release 7. Carrying handle 8. Hose 9. Extension wand 10. Combination tool 11. Cyclone-Lever 12. Dirt Cup 13. Filter Cup 14. Upper Tank 15. Cap Cyclone 16. Hose Wand Base 17. Height Adjustment Dial 18. Hose Clip 19.
Assembling Parts Step 2. Attaching the Hose and Tools 1-4 Line up the tabs on the base of the Twist Snap Hose with the corresponding notches on the hose collar as shown. 1-5 Slide the end of the hose wand with tabs into the Hose Wand Base. 1-6 Slide the extension wand and the crevice tool together into the storage clip. 1-7 ttach the Mini Turbo A Brush by putting the rib at the bottom of Mini Turbo Brush on two hooks of Handle. Snap Mini Turbo Brush into place as shown.
Operation 2-5 2-4 A. Combination tool: Two types of cleaning tools are included in one attachment: rotate for desired tool. · Use brush side to dust furniture, blinds, books, lamps, shelves. · Use upholstery side for curtains, draperies, cushions, fabrics. B. Crevice tool: Use in corners, on stairs, baseboards, and behind furniture. C. Extension Wand: Use with desired attachments and narrow wand for a longer reach. D.
Operation caution caution When using the hose attachment, please ensure that vacuum remains flat and level on the floor surface to prevent contact from the brush roller with the floor surface. If the vacuum does not remain flat and level, this could result in damage to the flooring. To reduce risk of injury and potential damage to floor surface, do not use the vacuum on a staircase. Always use vacuum from the bottom of the staircase and ensure that the vacuum remains securely flat on the floor surface.
Maintenance Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. When to empty the Dirt Cup The dirt cup needs to be emptied when the dirt reaches the "MAX" line on the side of the Cup. If more dirt than this accumulates, your cleaner will not operate effectively. Note: All new carpet has loose fibers which can fill the Dirt Cup quickly while vacuuming. Emptying the Dirt Cup Disconnect cleaner from electrical outlet.
Maintenance The belt 3-7 3-8 How to replace Remove agitator and used belt. Discard used belt. 3-9 3-10 3-11 With lettering on outside of belt and positioned as shown in box on (D), slide new belt over motor pulley (B). Insert agitator through belt and place belt in belt guide (C) on agitator. The belt on your cleaner causes the agitator to rotate and is important for the effective operation of the cleaner.
Maintenance Clearing Blockages Disconnect cleaner from electrical outlet. The hose on the back of the vacuum cleaner that carries the dirt from the nozzle to the Dirt Cup can sometimes become clogged. If you notice a change in the sound of the vacuum motor, check for blockages. 3-14 3-15 3-16 Check Upper Tank and Grille Cyclone. To open the Cap, grasp the holder and turn Toward the left. If the Grille was blocked, check and clear the grille in the center of the Cyclone.
Troubleshooting Check this list of possible problems and solutions before bringing your vacuum to a service center. Problem : Poor job of dirt pickup Problem: Cleaner won’t run Possible Cause Possible Solution · Full or clogged Dirt Cup · Empty the Dirt Cup and check for blockages. · Broken or worn belt · Replace belt. · Clogged hose or nozzle · Clean hose or nozzle area. · Hole in hose · Replace hose.
DJ68-00294R REV(0.0) DJ68-00294R(0.0).indd 12 2011.4.