VIDEO CASSETTE RECORDER SV-6333X SV-6332X SV-2333X SV-2303X Instruction Manual www.samsungvcr.
About this manual Contents GB Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner’s Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of your VCR’s features. ◆ FOREWORD ■ ■ The instructions in this manual are for models, SV-6333X, SV-6332X, SV-2333X and SV-2303X. Before you start reading this manual please check your model number. It is displayed on the rear of the VCR.
Contents (cont.) Safety Instructions GB The following illustrations represent precautions. ◆ PLAYING BACK Playing a Cassette......................................................................................... Adjusting Picture Alignment Manually ........................................................... Intelligent Picture Control .............................................................................. FORMAT 16:9 (WIDE SCREEN) (SV-6333X/SV-2333X) .............................
Infrared Remote Control Front View of the VCR GB (SV-6333X/SV-6332X/SV-2303X) EJECT BUTTON STANDBY/ON BUTTON VIDEO CASSETTE COMPARTMENT RECORD BUTTON REW BUTTON F.F BUTTON STANDBY/ON EJECT EJECT STANDBY/ON BUTTON STANDBY/ON REW EJECT BUTTON SLOW BUTTON F.F Q-PRO SHUTTLE IPC V-LOCK DISPLAY QUICK PROGRAMME BUTTON SHUTTLE BUTTON REC PROG SLOW IPC BUTTON STOP V-LOCK BUTTON DISPLAY BUTTON CLEAR AND RESET BUTTON CLR/RST FRAME ADVANCE BUTTON F.
Display Indicator Deciding How to Connect Your VCR GB You must take into account various factors when connecting audio or video systems: ◆ Types of connectors available on your systems 1 7 IPC + V NICAM 4 ◆ Systems connected permanently to the VCR (satellite receiver for example) or temporarily (camcorder for example) 3 2 5 Your VCR is equipped with the following connectors.
Connecting Your VCR to the TV using the Coaxial Cable Connecting a Decoder for scrambled PAY TV broadcasts ★(SV-6333X/SV-2333X Only) GB To receive television programmes a signal must be received from one of the following sources: ◆ ◆ ◆ ◆ ORTIE D AUDIO ☛ G TV 2 An outdoor aerial An indoor aerial A cable television network A satellite receiver Aerial DECODER TV AV1(EURO AV) 3 Make sure that both the television and the VCR are switched off before connecting the cables.
Connecting Your VCR to the Satellite receiver or Other Equipment Plug & Auto Set Up GB You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities. 1. AV1(EURO AV): By means of 21-pin Scart Cable Plug the SCART Cable with satellite receiver or other equipment into the AV1(EURO AV) socket on the rear of the VCR.
Tuning Your Television for the VCR You must tune your television for the VCR only if you are not using a Scart cable ➢ STANDBY/ON EJECT 2SLOW Q-PRO SHUTTLE IPC To view pictures from your VCR when a Scart cable is used, the television must be set to the audio/video mode (AV). 1 Switch on the television. 2 Switch on the VCR by pressing STANDBY/ON on the front of the VCR or STANDBY/ON on the remote control. 3 Select a programme position on the television to be reserved for use with your VCR.
Inserting Batteries in the Remote Control GB You must insert or replace the batteries in the remote control when you: ◆ Purchase the video cassette recorder ◆ Find that the remote control is no longer working correctly 1 Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control.
Displaying/Hiding On-Screen Information Setting the VCR Output Channel ★(SV-6333X) REPEAT AU DI O TV/VCR DUB Your VCR displays most information both on the VCR and the television. 1 D EE SP 2 2 2 OK 3 You can choose to display or hide this information on the television screen (except for the Index, Programming MENU and Showview function ★(SV-6333X/SV-6332X/SV-2333X only), which cannot be hidden).
Presetting the Stations Manually Presetting the Stations Automatically ☛ ➢ ☛ PROG OPTIONS INSTALL INSTALL CLOCK BONUS LANG SETUP " ❷!!➛❿!! OK BEENDEN: MENU You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13). Your VCR contains a built-in tuner used to receive television broadcasts. You must preset the stations received through the tuner.
Clearing a Preset Station Changing the Preset Station Table GB You can rearrange the preset TV stations according to your own preferences programme number assigned to the station. If you have stored a TV station: ◆ That you do not require PROG OPTIONS ◆ At the wrong programme position INSTALL INSTALL you can cancel it. CLOCK BONUS LANG SETUP " ❷!!➛❿!! OK Press the MENU button on the remote control. Result: The programming menu is displayed. 2 Press the corresponding SETUP option.
Setting the AV2 Connection ★(SV-6333X/SV-2333X Only) Selecting the Cassette Type GB If you wish to use the AV2 socket for a PAY TV DECODER, you must change AV2 to the required position. PROG OPTIONS CLOCK BONUS 1 Press MENU on the remote control. Result: The programming menu is displayed. 2 Press the corresponding SETUP option. 3 Press the OK button to select this option. Result: The SETUP menu is displayed.
Protecting a Recorded Cassette Recording a Programme with Automatic Stop GB Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. This function enables you to record up to nine hours of programmes. (LP) Your VCR stops automatically after the requested length of time. 1 1 If you wish to protect a cassette, break off the tab using a small screwdriver.
Using the ShowView Feature ★(SV-6333X/SV-6332X/SV-2333X Only) Modifying ShowView Programming ★(SV-6333X/SV-6332X/SV-2333X Only) GB UD IO C RE Before presetting your VCR: ◆ Check that the date and time are correct D EE SP ◆ Insert the cassette on which the programme is to be recorded (safety tab intact) 1 Up to six programmes can be preset.
Using the Quick Programming Feature The Quick Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset.
Playing a Cassette Intelligent Picture Control This function allows you to play back any pre-recorded cassette. SP 2 1 Switch on both the television and your VCR. 2 Insert the video cassette to be played. If the safety tab on the cassette is intact, press ❿II. Otherwise, the cassette is played automatically. OK ➢ When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking).
FORMAT 16:9 (WIDE SCREEN) ★(SV-6333X/SV-2333X Only) Your VCR can automatically read a 16:9 signal from the AV2 input or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through a 21 pin scart cable. 1 OPTIONS OSD KASS. WÄHLEN FARBSYSTEM IPC ❿ 16:9 # ❷ ❿ :EIN :E180 :AUTO :EIN :AUTO BEENDEN: MENU Press MENU on the remote control. Result: The programming menu is displayed. 2 Press the corresponding # , EINSTELLUNGEN option.
Playing a Cassette in Slow Motion You can play a cassette in slow motion. ➢ No sound is heard when playing back a cassette in slow motion. SLOW 1 SHUTTLE 1 1 V-LOCK CLR/RST INPUT ❿II to start playing the cassette ◆ SLOW ( ) as many times as required to decrease or increase the speed respectively To return to the normal speed, press the ❿II button twice. SLOW When playing back in slow motion, picture interference may occur. Press the TRK ( or ) buttons to minimize this effect. DISPLAY ☛ F.
Playing a Sequence at Variable Speeds GB You can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: You wish to analyze a sportsperson’s technique, movement by movement. SLOW SHUTTLE The Shuttle function is available on the Remote control ➢ 1 V-LOCK D 1 Press: ◆ ◆ ◆ 2 No sound is heard when playing a sequence at variable speeds.
Auto Repeat Play Using the Tape Counter You can set repeat play to repeat the tape continuously from beginning to end. PROG OPTIONS INSTALL CLOCK BONUS BONUS LANG 1 Press MENU on the remote control. Result: The programming menu is displayed. 2 Press the corresponding $ , ❷ or ➛, ❿ buttons to select the ZUSATZFUNKTIONEN option. 3 Press the OK button to select this option. Result: The ZUSATZFUNKTIONEN menu is displayed.
Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change. SP 2 OK 1 Insert the cassette to be edited in your VCR. 2 Press the ❿ll button to start playback. 3 When you reach the position from which you wish to start the new recording, press the ❿ll button. F.ADV 4 Press the F.ADV ( ) button again as often as necessary to advance frame by frame, until the exact recording position is located.
Technical Specifications Problems and Solutions GB Before contacting the Samsung after-sales service, perform the following simple checks. Design and specifications are subject to change without notice.
TV Frequency Table (System-B/G) 002~012 :CCIR STD VHF 013~020 :ITALY 021~069 :CCIR STD UHF 071~075 :CCIR CABLE 201~241 :CCIR STD CABLE DISP CH Band Fp 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 V-L V-L V-L V-H V-H V-H V-H V-H V-H V-H V-H V-L V-L V-L V-H V-H V-H V-H V-H UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF UHF