Cassette Recorder Instruction Manual
GB
35
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example
: You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢ No sound is heard when playing a sequence at variable
speeds.
1 Press:
◆
❿
II
during playback
◆ SHUTTLE ( ) to play the cassette backwards
◆ SHUTTLE ( ) to play the cassette forwards
2 Each time you press a SHUTTLE ( ) button, the speed is
changed as shown in the following illustration.
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
etc.
21 12
➞
➢ This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same
system and vice versa.
1 To search for a specific index, press INDEX.
2 Press the
➛➛
or
❿❿
buttons depending on the direction where your
desired programme is located. Each time you press the
➛➛
or
❿❿
buttons, the number decreases or increases respectively.
Result
: The index number is displayed.
3 The VCR starts to search for the point you specified with the
➛➛
or
❿❿
buttons.
Result
: When the index is found, cassette playback starts.
➢ You can set an index number up to ±20.
SHUTTLE
SLOW
D
SHUTTLE
V-LOCK
C/S
1
1
REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY
PLAY PLAY PLAY
STILL
MOTION MOTION PLAY
X3 X7 X9
X9 X7 X3 X1/10 X1/5
CLR/RST
F.ADV
INPUT INDEX
R
E
C
M
E
N
REPEAT
1
INDEX : --
➛➛!!!!❿❿
INDEX : - 6
➛➛!!