Cassette Recorder Instruction Manual
GB
3736
Using the Tape Counter
DISPLAY
V
-
LOCK
CLR/RST F.ADV
INPUT INDEX
TRK PROG
R
E
C
M
E
N
U
A
U
D
I
O
REPEAT
IPC
DISPLAY
SHUTTLE
V-LOCK
RST F.ADV
P
UT INDEX
TRK PROG
2
2
0:00:00
You can set repeat play to repeat the tape continuously from
beginning to end.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
$
,
❷
or
➛
,
❿
buttons to select the
ZUSATZFUNKTIONEN option.
3 Press the OK button to select this option.
Result
: The
ZUSATZFUNKTIONEN menu is displayed.
4 Press the corresponding
$
or
❷
buttons, until the cursor is placed
in front of the
WIEDERHOLEN option.
5 To... Press
➛
or
❿
, until...
Repeat play EIN is displayed.
Do not wish to repeat play AUS is displayed.
6 On completion, press MENU twice to exit the menu.
You can set interval repeat play to repeat the cassette several times
for special interval.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
$
,
❷
or
➛
,
❿
buttons to select the
ZUSATZFUNKTIONEN option.
3 Press the OK button to select this option.
Result
: The ZUSATZFUNKTIONENN menu is displayed.
4 Press the corresponding
$
or
❷
buttons, until the cursor is placed
in front of the
BER. WIEDERHOLEN option.
5 To... Press
❿
, until...
Interval repeat play 5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval repeat play AUS is displayed.
6 On completion, press MENU twice to exit the menu.
7 To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result
:“INTERVAL REPEAT SETTING” is displayed.
Press the INPUT/REPEAT button one more time at the desired
end point.
Result
: The tape is automatically rewound to the start point.
“
INTERVAL REPEAT” is displayed.
Interval Repeat Play
Auto Repeat Play
ZUSATZFUNKTIONEN
PROG OPTIONS INSTALL
CLOCK BONUS LANG
BONUS
$❷!!
➛❿!!
OK BEENDEN:MENU
BONUS
AUTO-AUS :AUS
❿
WIEDERHOLEN :AUS
BER. WIEDERHOLEN : 5
$❷
❿
BEENDEN:MENU
ZUSATZFUNKTIONEN
PROG OPTIONS INSTALL
CLOCK BONUS LANG
BONUS
$❷!!
➛❿!!
OK BEENDEN:MENU
BONUS
AUTO-AUS :AUS
WIEDERHOLEN :AUS
❿
BER. WIEDERHOLEN : 5
$❷
❿
BEENDEN:MENU
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the VCR
◆ Allows you to find the beginning of a sequence easily
☛ If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a sequence:
◆ Press DISPLAY twice to display the counter
◆ Press CLR/RST when you want to set the tape counter to
zero
3 To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press
➛➛
or
❿❿
.
Result
: The VCR stops automatically when the counter
reaches zero.
➢ Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISPLAY:
◆ Once to display the current function, programme
number, recording speed
★
(SV-6333X/SV-6332X only)
,
date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display