VCR User Manual

GB
21
GB
20
Changing the Preset Station Table
You can rearrange the preset TV stations according to your own
preferences programme number assigned to the station.
1 Press the MENU button on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the MANUAL SET
UP option is selected.
And then press the
❿ button to select this option.
Result
: The TV STATION TABLE menu is displayed.
5 Press the corresponding  or ❷ buttons, until the required preset
TV programme is selected.
Result
: The selected station is displayed at the same time on
the television screen.
6 To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7 Press the  or ❷ buttons to select required position. And then
press OK again to swap the position.
8 You can modify this station by repeating the same procedure from
Step
5 onwards.
9 On completion, press the MENU button three times to exit the
menu.
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷ ➛❿ OK END:MENU
**
TV STATION TABLE
**
PR CH NAME
1 002 CAEB
2 --- ----
3 --- ----
4 --- ----
5 --- ----
❷ SWAPPING:OK
MENU
**
TV STATION TABLE
**
PR CH NAME
1 --- ----
2 --- ----
3 002 CAEB
4 --- ----
5 --- ----
❷ SWAPPING:OK
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
❷ ❿ END:MENU
★
(SV-655B/650B/450B/255B/250B)
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❷ ❿ END:MENU
★
(SV-655X/650X/450X/250X)
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷ ➛❿ OK END:MENU
**
TV STATION TABLE
**
PR CH NAME
1 002 CAEB
2 --- ----
3 --- ----
4 --- ----
5 --- ----
❷ ❿ SWAPPING:OK
DELETE:CLR/RST MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
❷ ❿ END:MENU
★
(SV-655B/650B/450B/255B/250B)
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❷ ❿ END:MENU
★
(SV-655X/650X/450X/250X)
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 Press the MENU button on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the MANUAL SET
UP option is selected.
5 Press the ❿ button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding  or ❷ buttons, until the required preset
TV station (PR) is selected.
7 Press the CLR/RST button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the MENU button three times to exit the
menu.
Clearing a Preset Station